diff --git a/modules/zlib/moz.build b/modules/zlib/moz.build
index f59ee5f25..009942516 100644
--- a/modules/zlib/moz.build
+++ b/modules/zlib/moz.build
@@ -1,4 +1,4 @@
-# -*- Mode: python; indent-tabs-mode: nil; tab-width: 40 -*-
+# -*- Mode: python; c-basic-offset: 4; indent-tabs-mode: nil; tab-width: 40 -*-
 # vim: set filetype=python:
 # This Source Code Form is subject to the terms of the Mozilla Public
 # License, v. 2.0. If a copy of the MPL was not distributed with this
diff --git a/modules/zlib/src/ChangeLog b/modules/zlib/src/ChangeLog
index f22aabaef..b27cc4f0e 100644
--- a/modules/zlib/src/ChangeLog
+++ b/modules/zlib/src/ChangeLog
@@ -1,10 +1,53 @@
 
                 ChangeLog file for zlib
 
+Changes in 1.2.11 (15 Jan 2017)
+- Fix deflate stored bug when pulling last block from window
+- Permit immediate deflateParams changes before any deflate input
+
+Changes in 1.2.10 (2 Jan 2017)
+- Avoid warnings on snprintf() return value
+- Fix bug in deflate_stored() for zero-length input
+- Fix bug in gzwrite.c that produced corrupt gzip files
+- Remove files to be installed before copying them in Makefile.in
+- Add warnings when compiling with assembler code
+
+Changes in 1.2.9 (31 Dec 2016)
+- Fix contrib/minizip to permit unzipping with desktop API [Zouzou]
+- Improve contrib/blast to return unused bytes
+- Assure that gzoffset() is correct when appending
+- Improve compress() and uncompress() to support large lengths
+- Fix bug in test/example.c where error code not saved
+- Remedy Coverity warning [Randers-Pehrson]
+- Improve speed of gzprintf() in transparent mode
+- Fix inflateInit2() bug when windowBits is 16 or 32
+- Change DEBUG macro to ZLIB_DEBUG
+- Avoid uninitialized access by gzclose_w()
+- Allow building zlib outside of the source directory
+- Fix bug that accepted invalid zlib header when windowBits is zero
+- Fix gzseek() problem on MinGW due to buggy _lseeki64 there
+- Loop on write() calls in gzwrite.c in case of non-blocking I/O
+- Add --warn (-w) option to ./configure for more compiler warnings
+- Reject a window size of 256 bytes if not using the zlib wrapper
+- Fix bug when level 0 used with Z_HUFFMAN or Z_RLE
+- Add --debug (-d) option to ./configure to define ZLIB_DEBUG
+- Fix bugs in creating a very large gzip header
+- Add uncompress2() function, which returns the input size used
+- Assure that deflateParams() will not switch functions mid-block
+- Dramatically speed up deflation for level 0 (storing)
+- Add gzfread(), duplicating the interface of fread()
+- Add gzfwrite(), duplicating the interface of fwrite()
+- Add deflateGetDictionary() function
+- Use snprintf() for later versions of Microsoft C
+- Fix *Init macros to use z_ prefix when requested
+- Replace as400 with os400 for OS/400 support [Monnerat]
+- Add crc32_z() and adler32_z() functions with size_t lengths
+- Update Visual Studio project files [AraHaan]
+
 Changes in 1.2.8 (28 Apr 2013)
 - Update contrib/minizip/iowin32.c for Windows RT [Vollant]
 - Do not force Z_CONST for C++
-- Clean up contrib/vstudio [Ro§]
+- Clean up contrib/vstudio [RoÂ§]
 - Correct spelling error in zlib.h
 - Fix mixed line endings in contrib/vstudio
 
@@ -34,7 +77,7 @@ Changes in 1.2.7.1 (24 Mar 2013)
 - Clean up the usage of z_const and respect const usage within zlib
 - Clean up examples/gzlog.[ch] comparisons of different types
 - Avoid shift equal to bits in type (caused endless loop)
-- Fix unintialized value bug in gzputc() introduced by const patches
+- Fix uninitialized value bug in gzputc() introduced by const patches
 - Fix memory allocation error in examples/zran.c [Nor]
 - Fix bug where gzopen(), gzclose() would write an empty file
 - Fix bug in gzclose() when gzwrite() runs out of memory
@@ -194,7 +237,7 @@ Changes in 1.2.5.2 (17 Dec 2011)
 - Add a transparent write mode to gzopen() when 'T' is in the mode
 - Update python link in zlib man page
 - Get inffixed.h and MAKEFIXED result to match
-- Add a ./config --solo option to make zlib subset with no libary use
+- Add a ./config --solo option to make zlib subset with no library use
 - Add undocumented inflateResetKeep() function for CAB file decoding
 - Add --cover option to ./configure for gcc coverage testing
 - Add #define ZLIB_CONST option to use const in the z_stream interface
@@ -564,7 +607,7 @@ Changes in 1.2.3.1 (16 August 2006)
 - Update make_vms.com [Zinser]
 - Use -fPIC for shared build in configure [Teredesai, Nicholson]
 - Use only major version number for libz.so on IRIX and OSF1 [Reinholdtsen]
-- Use fdopen() (not _fdopen()) for Interix in zutil.h [BŠck]
+- Use fdopen() (not _fdopen()) for Interix in zutil.h [BÂŠck]
 - Add some FAQ entries about the contrib directory
 - Update the MVS question in the FAQ
 - Avoid extraneous reads after EOF in gzio.c [Brown]
@@ -1178,7 +1221,7 @@ Changes in 1.0.6 (19 Jan 1998)
         386 asm code replacing longest_match().
    contrib/iostream/ by Kevin Ruland <kevin@rodin.wustl.edu>
         A C++ I/O streams interface to the zlib gz* functions
-   contrib/iostream2/  by Tyge Løvset <Tyge.Lovset@cmr.no>
+   contrib/iostream2/  by Tyge LÃ¸vset <Tyge.Lovset@cmr.no>
         Another C++ I/O streams interface
    contrib/untgz/  by "Pedro A. Aranda Guti\irrez" <paag@tid.es>
         A very simple tar.gz file extractor using zlib
@@ -1267,7 +1310,7 @@ Changes in 1.0.1 (20 May 96) [1.0 skipped to avoid confusion]
 - fix array overlay in deflate.c which sometimes caused bad compressed data
 - fix inflate bug with empty stored block
 - fix MSDOS medium model which was broken in 0.99
-- fix deflateParams() which could generated bad compressed data.
+- fix deflateParams() which could generate bad compressed data.
 - Bytef is define'd instead of typedef'ed (work around Borland bug)
 - added an INDEX file
 - new makefiles for DJGPP (Makefile.dj2), 32-bit Borland (Makefile.b32),
diff --git a/modules/zlib/src/ChangeLog.moz b/modules/zlib/src/ChangeLog.moz
index 12755d05a..98cd9f9c7 100644
--- a/modules/zlib/src/ChangeLog.moz
+++ b/modules/zlib/src/ChangeLog.moz
@@ -63,3 +63,7 @@ Mozilla.org changes:
   (keeping '#include "mozzconf.h"' in zconf.h)
   See bug #866964
   
+- 16 January 2017
+  Sync'ed with 1.2.11 release
+  (keeping '#include "mozzconf.h"' in zconf.h)
+  See bug #1328099
diff --git a/modules/zlib/src/README b/modules/zlib/src/README
index 5ca9d127e..51106de47 100644
--- a/modules/zlib/src/README
+++ b/modules/zlib/src/README
@@ -1,6 +1,6 @@
 ZLIB DATA COMPRESSION LIBRARY
 
-zlib 1.2.8 is a general purpose data compression library.  All the code is
+zlib 1.2.11 is a general purpose data compression library.  All the code is
 thread safe.  The data format used by the zlib library is described by RFCs
 (Request for Comments) 1950 to 1952 in the files
 http://tools.ietf.org/html/rfc1950 (zlib format), rfc1951 (deflate format) and
@@ -31,7 +31,7 @@ Mark Nelson <markn@ieee.org> wrote an article about zlib for the Jan.  1997
 issue of Dr.  Dobb's Journal; a copy of the article is available at
 http://marknelson.us/1997/01/01/zlib-engine/ .
 
-The changes made in version 1.2.8 are documented in the file ChangeLog.
+The changes made in version 1.2.11 are documented in the file ChangeLog.
 
 Unsupported third party contributions are provided in directory contrib/ .
 
@@ -84,7 +84,7 @@ Acknowledgments:
 
 Copyright notice:
 
- (C) 1995-2013 Jean-loup Gailly and Mark Adler
+ (C) 1995-2017 Jean-loup Gailly and Mark Adler
 
   This software is provided 'as-is', without any express or implied
   warranty.  In no event will the authors be held liable for any damages
diff --git a/modules/zlib/src/adler32.c b/modules/zlib/src/adler32.c
index a868f073d..a42f35fce 100644
--- a/modules/zlib/src/adler32.c
+++ b/modules/zlib/src/adler32.c
@@ -1,5 +1,5 @@
 /* adler32.c -- compute the Adler-32 checksum of a data stream
- * Copyright (C) 1995-2011 Mark Adler
+ * Copyright (C) 1995-2011, 2016 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -7,11 +7,9 @@
 
 #include "zutil.h"
 
-#define local static
-
 local uLong adler32_combine_ OF((uLong adler1, uLong adler2, z_off64_t len2));
 
-#define BASE 65521      /* largest prime smaller than 65536 */
+#define BASE 65521U     /* largest prime smaller than 65536 */
 #define NMAX 5552
 /* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */
 
@@ -61,15 +59,30 @@ local uLong adler32_combine_ OF((uLong adler1, uLong adler2, z_off64_t len2));
 #  define MOD63(a) a %= BASE
 #endif
 
+#if defined(ADLER32_SIMD_SSSE3)
+#include "adler32_simd.h"
+#include "x86.h"
+#elif defined(ADLER32_SIMD_NEON)
+#include "adler32_simd.h"
+#endif
+
 /* ========================================================================= */
-uLong ZEXPORT adler32(adler, buf, len)
+uLong ZEXPORT adler32_z(adler, buf, len)
     uLong adler;
     const Bytef *buf;
-    uInt len;
+    z_size_t len;
 {
     unsigned long sum2;
     unsigned n;
 
+#if defined(ADLER32_SIMD_SSSE3)
+    if (x86_cpu_enable_ssse3 && buf && len >= 64)
+        return adler32_simd_(adler, buf, len);
+#elif defined(ADLER32_SIMD_NEON)
+    if (buf && len >= 64)
+        return adler32_simd_(adler, buf, len);
+#endif
+
     /* split Adler-32 into component sums */
     sum2 = (adler >> 16) & 0xffff;
     adler &= 0xffff;
@@ -85,9 +98,24 @@ uLong ZEXPORT adler32(adler, buf, len)
         return adler | (sum2 << 16);
     }
 
+#if defined(ADLER32_SIMD_SSSE3)
+    /*
+     * Use SSSE3 to compute the adler32. Since this routine can be
+     * freely used, check CPU features here. zlib convention is to
+     * call adler32(0, NULL, 0), before making calls to adler32().
+     * So this is a good early (and infrequent) place to cache CPU
+     * features for those later, more interesting adler32() calls.
+     */
+    if (buf == Z_NULL) {
+        if (!len) /* Assume user is calling adler32(0, NULL, 0); */
+            x86_check_features();
+        return 1L;
+    }
+#else
     /* initial Adler-32 value (deferred check for len == 1 speed) */
     if (buf == Z_NULL)
         return 1L;
+#endif
 
     /* in case short lengths are provided, keep it somewhat fast */
     if (len < 16) {
@@ -132,6 +160,15 @@ uLong ZEXPORT adler32(adler, buf, len)
     return adler | (sum2 << 16);
 }
 
+/* ========================================================================= */
+uLong ZEXPORT adler32(adler, buf, len)
+    uLong adler;
+    const Bytef *buf;
+    uInt len;
+{
+    return adler32_z(adler, buf, len);
+}
+
 /* ========================================================================= */
 local uLong adler32_combine_(adler1, adler2, len2)
     uLong adler1;
@@ -156,7 +193,7 @@ local uLong adler32_combine_(adler1, adler2, len2)
     sum2 += ((adler1 >> 16) & 0xffff) + ((adler2 >> 16) & 0xffff) + BASE - rem;
     if (sum1 >= BASE) sum1 -= BASE;
     if (sum1 >= BASE) sum1 -= BASE;
-    if (sum2 >= (BASE << 1)) sum2 -= (BASE << 1);
+    if (sum2 >= ((unsigned long)BASE << 1)) sum2 -= ((unsigned long)BASE << 1);
     if (sum2 >= BASE) sum2 -= BASE;
     return sum1 | (sum2 << 16);
 }
diff --git a/modules/zlib/src/adler32_simd.c b/modules/zlib/src/adler32_simd.c
new file mode 100644
index 000000000..1354915cc
--- /dev/null
+++ b/modules/zlib/src/adler32_simd.c
@@ -0,0 +1,366 @@
+/* adler32_simd.c
+ *
+ * Copyright 2017 The Chromium Authors. All rights reserved.
+ * Use of this source code is governed by a BSD-style license that can be
+ * found in the Chromium source repository LICENSE file.
+ *
+ * Per http://en.wikipedia.org/wiki/Adler-32 the adler32 A value (aka s1) is
+ * the sum of N input data bytes D1 ... DN,
+ *
+ *   A = A0 + D1 + D2 + ... + DN
+ *
+ * where A0 is the initial value.
+ *
+ * SSE2 _mm_sad_epu8() can be used for byte sums (see http://bit.ly/2wpUOeD,
+ * for example) and accumulating the byte sums can use SSE shuffle-adds (see
+ * the "Integer" section of http://bit.ly/2erPT8t for details). Arm NEON has
+ * similar instructions.
+ *
+ * The adler32 B value (aka s2) sums the A values from each step:
+ *
+ *   B0 + (A0 + D1) + (A0 + D1 + D2) + ... + (A0 + D1 + D2 + ... + DN) or
+ *
+ *       B0 + N.A0 + N.D1 + (N-1).D2 + (N-2).D3 + ... + (N-(N-1)).DN
+ *
+ * B0 being the initial value. For 32 bytes (ideal for garden-variety SIMD):
+ *
+ *   B = B0 + 32.A0 + [D1 D2 D3 ... D32] x [32 31 30 ... 1].
+ *
+ * Adjacent blocks of 32 input bytes can be iterated with the expressions to
+ * compute the adler32 s1 s2 of M >> 32 input bytes [1].
+ *
+ * As M grows, the s1 s2 sums grow. If left unchecked, they would eventually
+ * overflow the precision of their integer representation (bad). However, s1
+ * and s2 also need to be computed modulo the adler BASE value (reduced). If
+ * at most NMAX bytes are processed before a reduce, s1 s2 _cannot_ overflow
+ * a uint32_t type (the NMAX constraint) [2].
+ *
+ * [1] the iterative equations for s2 contain constant factors; these can be
+ * hoisted from the n-blocks do loop of the SIMD code.
+ *
+ * [2] zlib adler32_z() uses this fact to implement NMAX-block-based updates
+ * of the adler s1 s2 of uint32_t type (see adler32.c).
+ */
+
+#include "adler32_simd.h"
+
+/* Definitions from adler32.c: largest prime smaller than 65536 */
+#define BASE 65521U
+/* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */
+#define NMAX 5552
+
+#if defined(ADLER32_SIMD_SSSE3)
+
+#include <tmmintrin.h>
+
+uint32_t ZLIB_INTERNAL adler32_simd_(  /* SSSE3 */
+    uint32_t adler,
+    const unsigned char *buf,
+    z_size_t len)
+{
+    /*
+     * Split Adler-32 into component sums.
+     */
+    uint32_t s1 = adler & 0xffff;
+    uint32_t s2 = adler >> 16;
+
+    /*
+     * Process the data in blocks.
+     */
+    const unsigned BLOCK_SIZE = 1 << 5;
+
+    z_size_t blocks = len / BLOCK_SIZE;
+    len -= blocks * BLOCK_SIZE;
+
+    while (blocks)
+    {
+        unsigned n = NMAX / BLOCK_SIZE;  /* The NMAX constraint. */
+        if (n > blocks)
+            n = (unsigned) blocks;
+        blocks -= n;
+
+        const __m128i tap1 =
+            _mm_setr_epi8(32,31,30,29,28,27,26,25,24,23,22,21,20,19,18,17);
+        const __m128i tap2 =
+            _mm_setr_epi8(16,15,14,13,12,11,10, 9, 8, 7, 6, 5, 4, 3, 2, 1);
+        const __m128i zero =
+            _mm_setr_epi8( 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
+        const __m128i ones =
+            _mm_set_epi16( 1, 1, 1, 1, 1, 1, 1, 1);
+
+        /*
+         * Process n blocks of data. At most NMAX data bytes can be
+         * processed before s2 must be reduced modulo BASE.
+         */
+        __m128i v_ps = _mm_set_epi32(0, 0, 0, s1 * n);
+        __m128i v_s2 = _mm_set_epi32(0, 0, 0, s2);
+        __m128i v_s1 = _mm_set_epi32(0, 0, 0, 0);
+
+        do {
+            /*
+             * Load 32 input bytes.
+             */
+            const __m128i bytes1 = _mm_loadu_si128((__m128i*)(buf));
+            const __m128i bytes2 = _mm_loadu_si128((__m128i*)(buf + 16));
+
+            /*
+             * Add previous block byte sum to v_ps.
+             */
+            v_ps = _mm_add_epi32(v_ps, v_s1);
+
+            /*
+             * Horizontally add the bytes for s1, multiply-adds the
+             * bytes by [ 32, 31, 30, ... ] for s2.
+             */
+            v_s1 = _mm_add_epi32(v_s1, _mm_sad_epu8(bytes1, zero));
+            const __m128i mad1 = _mm_maddubs_epi16(bytes1, tap1);
+            v_s2 = _mm_add_epi32(v_s2, _mm_madd_epi16(mad1, ones));
+
+            v_s1 = _mm_add_epi32(v_s1, _mm_sad_epu8(bytes2, zero));
+            const __m128i mad2 = _mm_maddubs_epi16(bytes2, tap2);
+            v_s2 = _mm_add_epi32(v_s2, _mm_madd_epi16(mad2, ones));
+
+            buf += BLOCK_SIZE;
+
+        } while (--n);
+
+        v_s2 = _mm_add_epi32(v_s2, _mm_slli_epi32(v_ps, 5));
+
+        /*
+         * Sum epi32 ints v_s1(s2) and accumulate in s1(s2).
+         */
+
+#define S23O1 _MM_SHUFFLE(2,3,0,1)  /* A B C D -> B A D C */
+#define S1O32 _MM_SHUFFLE(1,0,3,2)  /* A B C D -> C D A B */
+
+        v_s1 = _mm_add_epi32(v_s1, _mm_shuffle_epi32(v_s1, S23O1));
+        v_s1 = _mm_add_epi32(v_s1, _mm_shuffle_epi32(v_s1, S1O32));
+
+        s1 += _mm_cvtsi128_si32(v_s1);
+
+        v_s2 = _mm_add_epi32(v_s2, _mm_shuffle_epi32(v_s2, S23O1));
+        v_s2 = _mm_add_epi32(v_s2, _mm_shuffle_epi32(v_s2, S1O32));
+
+        s2 = _mm_cvtsi128_si32(v_s2);
+
+#undef S23O1
+#undef S1O32
+
+        /*
+         * Reduce.
+         */
+        s1 %= BASE;
+        s2 %= BASE;
+    }
+
+    /*
+     * Handle leftover data.
+     */
+    if (len) {
+        if (len >= 16) {
+            s2 += (s1 += *buf++);
+            s2 += (s1 += *buf++);
+            s2 += (s1 += *buf++);
+            s2 += (s1 += *buf++);
+
+            s2 += (s1 += *buf++);
+            s2 += (s1 += *buf++);
+            s2 += (s1 += *buf++);
+            s2 += (s1 += *buf++);
+
+            s2 += (s1 += *buf++);
+            s2 += (s1 += *buf++);
+            s2 += (s1 += *buf++);
+            s2 += (s1 += *buf++);
+
+            s2 += (s1 += *buf++);
+            s2 += (s1 += *buf++);
+            s2 += (s1 += *buf++);
+            s2 += (s1 += *buf++);
+
+            len -= 16;
+        }
+
+        while (len--) {
+            s2 += (s1 += *buf++);
+        }
+
+        if (s1 >= BASE)
+            s1 -= BASE;
+        s2 %= BASE;
+    }
+
+    /*
+     * Return the recombined sums.
+     */
+    return s1 | (s2 << 16);
+}
+
+#elif defined(ADLER32_SIMD_NEON)
+
+#include <arm_neon.h>
+
+uint32_t ZLIB_INTERNAL adler32_simd_(  /* NEON */
+    uint32_t adler,
+    const unsigned char *buf,
+    z_size_t len)
+{
+    /*
+     * Split Adler-32 into component sums.
+     */
+    uint32_t s1 = adler & 0xffff;
+    uint32_t s2 = adler >> 16;
+
+    /*
+     * Serially compute s1 & s2, until the data is 16-byte aligned.
+     */
+    if ((uintptr_t)buf & 15) {
+        while ((uintptr_t)buf & 15) {
+            s2 += (s1 += *buf++);
+            --len;
+        }
+
+        if (s1 >= BASE)
+            s1 -= BASE;
+        s2 %= BASE;
+    }
+
+    /*
+     * Process the data in blocks.
+     */
+    const unsigned BLOCK_SIZE = 1 << 5;
+
+    z_size_t blocks = len / BLOCK_SIZE;
+    len -= blocks * BLOCK_SIZE;
+
+    while (blocks)
+    {
+        unsigned n = NMAX / BLOCK_SIZE;  /* The NMAX constraint. */
+        if (n > blocks)
+            n = (unsigned) blocks;
+        blocks -= n;
+
+        /*
+         * Process n blocks of data. At most NMAX data bytes can be
+         * processed before s2 must be reduced modulo BASE.
+         */
+        uint32x4_t v_s2 = (uint32x4_t) { 0, 0, 0, s1 * n };
+        uint32x4_t v_s1 = (uint32x4_t) { 0, 0, 0, 0 };
+
+        uint16x8_t v_column_sum_1 = vdupq_n_u16(0);
+        uint16x8_t v_column_sum_2 = vdupq_n_u16(0);
+        uint16x8_t v_column_sum_3 = vdupq_n_u16(0);
+        uint16x8_t v_column_sum_4 = vdupq_n_u16(0);
+
+        do {
+            /*
+             * Load 32 input bytes.
+             */
+            const uint8x16_t bytes1 = vld1q_u8((uint8_t*)(buf));
+            const uint8x16_t bytes2 = vld1q_u8((uint8_t*)(buf + 16));
+
+            /*
+             * Add previous block byte sum to v_s2.
+             */
+            v_s2 = vaddq_u32(v_s2, v_s1);
+
+            /*
+             * Horizontally add the bytes for s1.
+             */
+            v_s1 = vpadalq_u16(v_s1, vpadalq_u8(vpaddlq_u8(bytes1), bytes2));
+
+            /*
+             * Vertically add the bytes for s2.
+             */
+            v_column_sum_1 = vaddw_u8(v_column_sum_1, vget_low_u8 (bytes1));
+            v_column_sum_2 = vaddw_u8(v_column_sum_2, vget_high_u8(bytes1));
+            v_column_sum_3 = vaddw_u8(v_column_sum_3, vget_low_u8 (bytes2));
+            v_column_sum_4 = vaddw_u8(v_column_sum_4, vget_high_u8(bytes2));
+
+            buf += BLOCK_SIZE;
+
+        } while (--n);
+
+        v_s2 = vshlq_n_u32(v_s2, 5);
+
+        /*
+         * Multiply-add bytes by [ 32, 31, 30, ... ] for s2.
+         */
+        v_s2 = vmlal_u16(v_s2, vget_low_u16 (v_column_sum_1),
+            (uint16x4_t) { 32, 31, 30, 29 });
+        v_s2 = vmlal_u16(v_s2, vget_high_u16(v_column_sum_1),
+            (uint16x4_t) { 28, 27, 26, 25 });
+        v_s2 = vmlal_u16(v_s2, vget_low_u16 (v_column_sum_2),
+            (uint16x4_t) { 24, 23, 22, 21 });
+        v_s2 = vmlal_u16(v_s2, vget_high_u16(v_column_sum_2),
+            (uint16x4_t) { 20, 19, 18, 17 });
+        v_s2 = vmlal_u16(v_s2, vget_low_u16 (v_column_sum_3),
+            (uint16x4_t) { 16, 15, 14, 13 });
+        v_s2 = vmlal_u16(v_s2, vget_high_u16(v_column_sum_3),
+            (uint16x4_t) { 12, 11, 10,  9 });
+        v_s2 = vmlal_u16(v_s2, vget_low_u16 (v_column_sum_4),
+            (uint16x4_t) {  8,  7,  6,  5 });
+        v_s2 = vmlal_u16(v_s2, vget_high_u16(v_column_sum_4),
+            (uint16x4_t) {  4,  3,  2,  1 });
+
+        /*
+         * Sum epi32 ints v_s1(s2) and accumulate in s1(s2).
+         */
+        uint32x2_t sum1 = vpadd_u32(vget_low_u32(v_s1), vget_high_u32(v_s1));
+        uint32x2_t sum2 = vpadd_u32(vget_low_u32(v_s2), vget_high_u32(v_s2));
+        uint32x2_t s1s2 = vpadd_u32(sum1, sum2);
+
+        s1 += vget_lane_u32(s1s2, 0);
+        s2 += vget_lane_u32(s1s2, 1);
+
+        /*
+         * Reduce.
+         */
+        s1 %= BASE;
+        s2 %= BASE;
+    }
+
+    /*
+     * Handle leftover data.
+     */
+    if (len) {
+        if (len >= 16) {
+            s2 += (s1 += *buf++);
+            s2 += (s1 += *buf++);
+            s2 += (s1 += *buf++);
+            s2 += (s1 += *buf++);
+
+            s2 += (s1 += *buf++);
+            s2 += (s1 += *buf++);
+            s2 += (s1 += *buf++);
+            s2 += (s1 += *buf++);
+
+            s2 += (s1 += *buf++);
+            s2 += (s1 += *buf++);
+            s2 += (s1 += *buf++);
+            s2 += (s1 += *buf++);
+
+            s2 += (s1 += *buf++);
+            s2 += (s1 += *buf++);
+            s2 += (s1 += *buf++);
+            s2 += (s1 += *buf++);
+
+            len -= 16;
+        }
+
+        while (len--) {
+            s2 += (s1 += *buf++);
+        }
+
+        if (s1 >= BASE)
+            s1 -= BASE;
+        s2 %= BASE;
+    }
+
+    /*
+     * Return the recombined sums.
+     */
+    return s1 | (s2 << 16);
+}
+
+#endif  /* ADLER32_SIMD_SSSE3 */
diff --git a/modules/zlib/src/adler32_simd.h b/modules/zlib/src/adler32_simd.h
new file mode 100644
index 000000000..52bb14d16
--- /dev/null
+++ b/modules/zlib/src/adler32_simd.h
@@ -0,0 +1,16 @@
+/* adler32_simd.h
+ *
+ * Copyright 2017 The Chromium Authors. All rights reserved.
+ * Use of this source code is governed by a BSD-style license that can be
+ * found in the Chromium source repository LICENSE file.
+ */
+
+#include <stdint.h>
+
+#include "zconf.h"
+#include "zutil.h"
+
+uint32_t ZLIB_INTERNAL adler32_simd_(
+    uint32_t adler,
+    const unsigned char *buf,
+    z_size_t len);
diff --git a/modules/zlib/src/chunkcopy.h b/modules/zlib/src/chunkcopy.h
new file mode 100644
index 000000000..70a568600
--- /dev/null
+++ b/modules/zlib/src/chunkcopy.h
@@ -0,0 +1,425 @@
+/* chunkcopy.h -- fast chunk copy and set operations
+ * Copyright (C) 2017 ARM, Inc.
+ * Copyright 2017 The Chromium Authors. All rights reserved.
+ * Use of this source code is governed by a BSD-style license that can be
+ * found in the Chromium source repository LICENSE file.
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+#ifndef CHUNKCOPY_H
+#define CHUNKCOPY_H
+
+#include <stdint.h>
+#include "zutil.h"
+
+#define Z_STATIC_ASSERT(name, assert) typedef char name[(assert) ? 1 : -1]
+
+#if __STDC_VERSION__ >= 199901L
+#define Z_RESTRICT restrict
+#else
+#define Z_RESTRICT
+#endif
+
+#if defined(__clang__) || defined(__GNUC__) || defined(__llvm__)
+#define Z_BUILTIN_MEMCPY __builtin_memcpy
+#else
+#define Z_BUILTIN_MEMCPY zmemcpy
+#endif
+
+#if defined(INFLATE_CHUNK_SIMD_NEON)
+#include <arm_neon.h>
+typedef uint8x16_t z_vec128i_t;
+#elif defined(INFLATE_CHUNK_SIMD_SSE2)
+#include <emmintrin.h>
+typedef __m128i z_vec128i_t;
+#else
+#error chunkcopy.h inflate chunk SIMD is not defined for your build target
+#endif
+
+#ifdef _MSC_VER
+#if _MSC_VER < 1900
+#define inline 
+#endif
+#endif
+
+/*
+ * chunk copy type: the z_vec128i_t type size should be exactly 128-bits
+ * and equal to CHUNKCOPY_CHUNK_SIZE.
+ */
+#define CHUNKCOPY_CHUNK_SIZE sizeof(z_vec128i_t)
+
+Z_STATIC_ASSERT(vector_128_bits_wide,
+                CHUNKCOPY_CHUNK_SIZE == sizeof(int8_t) * 16);
+
+/*
+ * Ask the compiler to perform a wide, unaligned load with a machine
+ * instruction appropriate for the z_vec128i_t type.
+ */
+static inline z_vec128i_t loadchunk(
+    const unsigned char FAR* s) {
+  z_vec128i_t v;
+  Z_BUILTIN_MEMCPY(&v, s, sizeof(v));
+  return v;
+}
+
+/*
+ * Ask the compiler to perform a wide, unaligned store with a machine
+ * instruction appropriate for the z_vec128i_t type.
+ */
+static inline void storechunk(
+    unsigned char FAR* d,
+    const z_vec128i_t v) {
+  Z_BUILTIN_MEMCPY(d, &v, sizeof(v));
+}
+
+/*
+ * Perform a memcpy-like operation, assuming that length is non-zero and that
+ * it's OK to overwrite at least CHUNKCOPY_CHUNK_SIZE bytes of output even if
+ * the length is shorter than this.
+ *
+ * It also guarantees that it will properly unroll the data if the distance
+ * between `out` and `from` is at least CHUNKCOPY_CHUNK_SIZE, which we rely on
+ * in chunkcopy_relaxed().
+ *
+ * Aside from better memory bus utilisation, this means that short copies
+ * (CHUNKCOPY_CHUNK_SIZE bytes or fewer) will fall straight through the loop
+ * without iteration, which will hopefully make the branch prediction more
+ * reliable.
+ */
+static inline unsigned char FAR* chunkcopy_core(
+    unsigned char FAR* out,
+    const unsigned char FAR* from,
+    unsigned len) {
+  const int bump = (--len % CHUNKCOPY_CHUNK_SIZE) + 1;
+  storechunk(out, loadchunk(from));
+  out += bump;
+  from += bump;
+  len /= CHUNKCOPY_CHUNK_SIZE;
+  while (len-- > 0) {
+    storechunk(out, loadchunk(from));
+    out += CHUNKCOPY_CHUNK_SIZE;
+    from += CHUNKCOPY_CHUNK_SIZE;
+  }
+  return out;
+}
+
+/*
+ * Like chunkcopy_core(), but avoid writing beyond of legal output.
+ *
+ * Accepts an additional pointer to the end of safe output.  A generic safe
+ * copy would use (out + len), but it's normally the case that the end of the
+ * output buffer is beyond the end of the current copy, and this can still be
+ * exploited.
+ */
+static inline unsigned char FAR* chunkcopy_core_safe(
+    unsigned char FAR* out,
+    const unsigned char FAR* from,
+    unsigned len,
+    unsigned char FAR* limit) {
+  Assert(out + len <= limit, "chunk copy exceeds safety limit");
+  if ((limit - out) < (ptrdiff_t)CHUNKCOPY_CHUNK_SIZE) {
+    const unsigned char FAR* Z_RESTRICT rfrom = from;
+    if (len & 8) {
+      Z_BUILTIN_MEMCPY(out, rfrom, 8);
+      out += 8;
+      rfrom += 8;
+    }
+    if (len & 4) {
+      Z_BUILTIN_MEMCPY(out, rfrom, 4);
+      out += 4;
+      rfrom += 4;
+    }
+    if (len & 2) {
+      Z_BUILTIN_MEMCPY(out, rfrom, 2);
+      out += 2;
+      rfrom += 2;
+    }
+    if (len & 1) {
+      *out++ = *rfrom++;
+    }
+    return out;
+  }
+  return chunkcopy_core(out, from, len);
+}
+
+/*
+ * Perform short copies until distance can be rewritten as being at least
+ * CHUNKCOPY_CHUNK_SIZE.
+ *
+ * Assumes it's OK to overwrite at least the first 2*CHUNKCOPY_CHUNK_SIZE
+ * bytes of output even if the copy is shorter than this.  This assumption
+ * holds within zlib inflate_fast(), which starts every iteration with at
+ * least 258 bytes of output space available (258 being the maximum length
+ * output from a single token; see inffast.c).
+ */
+static inline unsigned char FAR* chunkunroll_relaxed(
+    unsigned char FAR* out,
+    unsigned FAR* dist,
+    unsigned FAR* len) {
+  const unsigned char FAR* from = out - *dist;
+  while (*dist < *len && *dist < CHUNKCOPY_CHUNK_SIZE) {
+    storechunk(out, loadchunk(from));
+    out += *dist;
+    *len -= *dist;
+    *dist += *dist;
+  }
+  return out;
+}
+
+#if defined(INFLATE_CHUNK_SIMD_NEON)
+/*
+ * v_load64_dup(): load *src as an unaligned 64-bit int and duplicate it in
+ * every 64-bit component of the 128-bit result (64-bit int splat).
+ */
+static inline z_vec128i_t v_load64_dup(const void* src) {
+  return vcombine_u8(vld1_u8(src), vld1_u8(src));
+}
+
+/*
+ * v_load32_dup(): load *src as an unaligned 32-bit int and duplicate it in
+ * every 32-bit component of the 128-bit result (32-bit int splat).
+ */
+static inline z_vec128i_t v_load32_dup(const void* src) {
+  int32_t i32;
+  Z_BUILTIN_MEMCPY(&i32, src, sizeof(i32));
+  return vreinterpretq_u8_s32(vdupq_n_s32(i32));
+}
+
+/*
+ * v_load16_dup(): load *src as an unaligned 16-bit int and duplicate it in
+ * every 16-bit component of the 128-bit result (16-bit int splat).
+ */
+static inline z_vec128i_t v_load16_dup(const void* src) {
+  int16_t i16;
+  Z_BUILTIN_MEMCPY(&i16, src, sizeof(i16));
+  return vreinterpretq_u8_s16(vdupq_n_s16(i16));
+}
+
+/*
+ * v_load8_dup(): load the 8-bit int *src and duplicate it in every 8-bit
+ * component of the 128-bit result (8-bit int splat).
+ */
+static inline z_vec128i_t v_load8_dup(const void* src) {
+  return vld1q_dup_u8((const uint8_t*)src);
+}
+
+/*
+ * v_store_128(): store the 128-bit vec in a memory destination (that might
+ * not be 16-byte aligned) void* out.
+ */
+static inline void v_store_128(void* out, const z_vec128i_t vec) {
+  vst1q_u8(out, vec);
+}
+
+#elif defined(INFLATE_CHUNK_SIMD_SSE2)
+/*
+ * v_load64_dup(): load *src as an unaligned 64-bit int and duplicate it in
+ * every 64-bit component of the 128-bit result (64-bit int splat).
+ */
+static inline z_vec128i_t v_load64_dup(const void* src) {
+  int64_t i64;
+  Z_BUILTIN_MEMCPY(&i64, src, sizeof(i64));
+#if 0//def _WIN64
+  return _mm_set1_epi64x(i64);
+#else
+  _declspec(align(16)) uint64_t temp[2] = {i64, i64};
+  return _mm_load_si128((const __m128i*)temp);
+#endif
+}
+
+/*
+ * v_load32_dup(): load *src as an unaligned 32-bit int and duplicate it in
+ * every 32-bit component of the 128-bit result (32-bit int splat).
+ */
+static inline z_vec128i_t v_load32_dup(const void* src) {
+  int32_t i32;
+  Z_BUILTIN_MEMCPY(&i32, src, sizeof(i32));
+  return _mm_set1_epi32(i32);
+}
+
+/*
+ * v_load16_dup(): load *src as an unaligned 16-bit int and duplicate it in
+ * every 16-bit component of the 128-bit result (16-bit int splat).
+ */
+static inline z_vec128i_t v_load16_dup(const void* src) {
+  int16_t i16;
+  Z_BUILTIN_MEMCPY(&i16, src, sizeof(i16));
+  return _mm_set1_epi16(i16);
+}
+
+/*
+ * v_load8_dup(): load the 8-bit int *src and duplicate it in every 8-bit
+ * component of the 128-bit result (8-bit int splat).
+ */
+static inline z_vec128i_t v_load8_dup(const void* src) {
+  return _mm_set1_epi8(*(const char*)src);
+}
+
+/*
+ * v_store_128(): store the 128-bit vec in a memory destination (that might
+ * not be 16-byte aligned) void* out.
+ */
+static inline void v_store_128(void* out, const z_vec128i_t vec) {
+  _mm_storeu_si128((__m128i*)out, vec);
+}
+#endif
+
+/*
+ * Perform an overlapping copy which behaves as a memset() operation, but
+ * supporting periods other than one, and assume that length is non-zero and
+ * that it's OK to overwrite at least CHUNKCOPY_CHUNK_SIZE*3 bytes of output
+ * even if the length is shorter than this.
+ */
+static inline unsigned char FAR* chunkset_core(
+    unsigned char FAR* out,
+    unsigned period,
+    unsigned len) {
+  z_vec128i_t v;
+  const int bump = ((len - 1) % sizeof(v)) + 1;
+
+  switch (period) {
+    case 1:
+      v = v_load8_dup(out - 1);
+      v_store_128(out, v);
+      out += bump;
+      len -= bump;
+      while (len > 0) {
+        v_store_128(out, v);
+        out += sizeof(v);
+        len -= sizeof(v);
+      }
+      return out;
+    case 2:
+      v = v_load16_dup(out - 2);
+      v_store_128(out, v);
+      out += bump;
+      len -= bump;
+      if (len > 0) {
+        v = v_load16_dup(out - 2);
+        do {
+          v_store_128(out, v);
+          out += sizeof(v);
+          len -= sizeof(v);
+        } while (len > 0);
+      }
+      return out;
+    case 4:
+      v = v_load32_dup(out - 4);
+      v_store_128(out, v);
+      out += bump;
+      len -= bump;
+      if (len > 0) {
+        v = v_load32_dup(out - 4);
+        do {
+          v_store_128(out, v);
+          out += sizeof(v);
+          len -= sizeof(v);
+        } while (len > 0);
+      }
+      return out;
+    case 8:
+      v = v_load64_dup(out - 8);
+      v_store_128(out, v);
+      out += bump;
+      len -= bump;
+      if (len > 0) {
+        v = v_load64_dup(out - 8);
+        do {
+          v_store_128(out, v);
+          out += sizeof(v);
+          len -= sizeof(v);
+        } while (len > 0);
+      }
+      return out;
+  }
+  out = chunkunroll_relaxed(out, &period, &len);
+  return chunkcopy_core(out, out - period, len);
+}
+
+/*
+ * Perform a memcpy-like operation, but assume that length is non-zero and that
+ * it's OK to overwrite at least CHUNKCOPY_CHUNK_SIZE bytes of output even if
+ * the length is shorter than this.
+ *
+ * Unlike chunkcopy_core() above, no guarantee is made regarding the behaviour
+ * of overlapping buffers, regardless of the distance between the pointers.
+ * This is reflected in the `restrict`-qualified pointers, allowing the
+ * compiler to re-order loads and stores.
+ */
+static inline unsigned char FAR* chunkcopy_relaxed(
+    unsigned char FAR* Z_RESTRICT out,
+    const unsigned char FAR* Z_RESTRICT from,
+    unsigned len) {
+  return chunkcopy_core(out, from, len);
+}
+
+/*
+ * Like chunkcopy_relaxed(), but avoid writing beyond of legal output.
+ *
+ * Unlike chunkcopy_core_safe() above, no guarantee is made regarding the
+ * behaviour of overlapping buffers, regardless of the distance between the
+ * pointers.  This is reflected in the `restrict`-qualified pointers, allowing
+ * the compiler to re-order loads and stores.
+ *
+ * Accepts an additional pointer to the end of safe output.  A generic safe
+ * copy would use (out + len), but it's normally the case that the end of the
+ * output buffer is beyond the end of the current copy, and this can still be
+ * exploited.
+ */
+static inline unsigned char FAR* chunkcopy_safe(
+    unsigned char FAR* out,
+    const unsigned char FAR* Z_RESTRICT from,
+    unsigned len,
+    unsigned char FAR* limit) {
+  Assert(out + len <= limit, "chunk copy exceeds safety limit");
+  return chunkcopy_core_safe(out, from, len, limit);
+}
+
+/*
+ * Perform chunky copy within the same buffer, where the source and destination
+ * may potentially overlap.
+ *
+ * Assumes that len > 0 on entry, and that it's safe to write at least
+ * CHUNKCOPY_CHUNK_SIZE*3 bytes to the output.
+ */
+static inline unsigned char FAR* chunkcopy_lapped_relaxed(
+    unsigned char FAR* out,
+    unsigned dist,
+    unsigned len) {
+  if (dist < len && dist < CHUNKCOPY_CHUNK_SIZE) {
+    return chunkset_core(out, dist, len);
+  }
+  return chunkcopy_core(out, out - dist, len);
+}
+
+/*
+ * Behave like chunkcopy_lapped_relaxed(), but avoid writing beyond of legal
+ * output.
+ *
+ * Accepts an additional pointer to the end of safe output.  A generic safe
+ * copy would use (out + len), but it's normally the case that the end of the
+ * output buffer is beyond the end of the current copy, and this can still be
+ * exploited.
+ */
+static inline unsigned char FAR* chunkcopy_lapped_safe(
+    unsigned char FAR* out,
+    unsigned dist,
+    unsigned len,
+    unsigned char FAR* limit) {
+  Assert(out + len <= limit, "chunk copy exceeds safety limit");
+  if ((limit - out) < (ptrdiff_t)(3 * CHUNKCOPY_CHUNK_SIZE)) {
+    /* TODO(cavalcantii): try harder to optimise this */
+    while (len-- > 0) {
+      *out = *(out - dist);
+      out++;
+    }
+    return out;
+  }
+  return chunkcopy_lapped_relaxed(out, dist, len);
+}
+
+#undef Z_STATIC_ASSERT
+#undef Z_RESTRICT
+#undef Z_BUILTIN_MEMCPY
+
+#endif /* CHUNKCOPY_H */
diff --git a/modules/zlib/src/compress.c b/modules/zlib/src/compress.c
index 6e9762676..e2db404ab 100644
--- a/modules/zlib/src/compress.c
+++ b/modules/zlib/src/compress.c
@@ -1,5 +1,5 @@
 /* compress.c -- compress a memory buffer
- * Copyright (C) 1995-2005 Jean-loup Gailly.
+ * Copyright (C) 1995-2005, 2014, 2016 Jean-loup Gailly, Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -28,16 +28,11 @@ int ZEXPORT compress2 (dest, destLen, source, sourceLen, level)
 {
     z_stream stream;
     int err;
+    const uInt max = (uInt)-1;
+    uLong left;
 
-    stream.next_in = (z_const Bytef *)source;
-    stream.avail_in = (uInt)sourceLen;
-#ifdef MAXSEG_64K
-    /* Check for source > 64K on 16-bit machine: */
-    if ((uLong)stream.avail_in != sourceLen) return Z_BUF_ERROR;
-#endif
-    stream.next_out = dest;
-    stream.avail_out = (uInt)*destLen;
-    if ((uLong)stream.avail_out != *destLen) return Z_BUF_ERROR;
+    left = *destLen;
+    *destLen = 0;
 
     stream.zalloc = (alloc_func)0;
     stream.zfree = (free_func)0;
@@ -46,15 +41,26 @@ int ZEXPORT compress2 (dest, destLen, source, sourceLen, level)
     err = deflateInit(&stream, level);
     if (err != Z_OK) return err;
 
-    err = deflate(&stream, Z_FINISH);
-    if (err != Z_STREAM_END) {
-        deflateEnd(&stream);
-        return err == Z_OK ? Z_BUF_ERROR : err;
-    }
-    *destLen = stream.total_out;
+    stream.next_out = dest;
+    stream.avail_out = 0;
+    stream.next_in = (z_const Bytef *)source;
+    stream.avail_in = 0;
+
+    do {
+        if (stream.avail_out == 0) {
+            stream.avail_out = left > (uLong)max ? max : (uInt)left;
+            left -= stream.avail_out;
+        }
+        if (stream.avail_in == 0) {
+            stream.avail_in = sourceLen > (uLong)max ? max : (uInt)sourceLen;
+            sourceLen -= stream.avail_in;
+        }
+        err = deflate(&stream, sourceLen ? Z_NO_FLUSH : Z_FINISH);
+    } while (err == Z_OK);
 
-    err = deflateEnd(&stream);
-    return err;
+    *destLen = stream.total_out;
+    deflateEnd(&stream);
+    return err == Z_STREAM_END ? Z_OK : err;
 }
 
 /* ===========================================================================
diff --git a/modules/zlib/src/crc32.c b/modules/zlib/src/crc32.c
index 979a7190a..eae4f721a 100644
--- a/modules/zlib/src/crc32.c
+++ b/modules/zlib/src/crc32.c
@@ -1,5 +1,5 @@
 /* crc32.c -- compute the CRC-32 of a data stream
- * Copyright (C) 1995-2006, 2010, 2011, 2012 Mark Adler
+ * Copyright (C) 1995-2006, 2010, 2011, 2012, 2016 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  *
  * Thanks to Rodney Brown <rbrown64@csc.com.au> for his contribution of faster
@@ -28,19 +28,20 @@
 #  endif /* !DYNAMIC_CRC_TABLE */
 #endif /* MAKECRCH */
 
+#include "deflate.h"
+#include "x86.h"
+#include "crc32_simd.h"
 #include "zutil.h"      /* for STDC and FAR definitions */
 
-#define local static
-
 /* Definitions for doing the crc four data bytes at a time. */
 #if !defined(NOBYFOUR) && defined(Z_U4)
 #  define BYFOUR
 #endif
 #ifdef BYFOUR
    local unsigned long crc32_little OF((unsigned long,
-                        const unsigned char FAR *, unsigned));
+                        const unsigned char FAR *, z_size_t));
    local unsigned long crc32_big OF((unsigned long,
-                        const unsigned char FAR *, unsigned));
+                        const unsigned char FAR *, z_size_t));
 #  define TBLS 8
 #else
 #  define TBLS 1
@@ -201,12 +202,38 @@ const z_crc_t FAR * ZEXPORT get_crc_table()
 #define DO8 DO1; DO1; DO1; DO1; DO1; DO1; DO1; DO1
 
 /* ========================================================================= */
-unsigned long ZEXPORT crc32(crc, buf, len)
+unsigned long ZEXPORT crc32_z(crc, buf, len)
     unsigned long crc;
     const unsigned char FAR *buf;
-    uInt len;
+    z_size_t len;
 {
-    if (buf == Z_NULL) return 0UL;
+#if defined(CRC32_SIMD_SSE42_PCLMUL)
+    /*
+     * Use x86 sse4.2+pclmul SIMD to compute the crc32. Since this
+     * routine can be freely used, check the CPU features here.
+     */
+    if (buf == Z_NULL) {
+        if (!len) /* Assume user is calling crc32(0, NULL, 0); */
+            x86_check_features();
+        return 0UL;
+    }
+
+    if (x86_cpu_enable_simd && len >= Z_CRC32_SSE42_MINIMUM_LENGTH) {
+        /* crc32 16-byte chunks */
+        z_size_t chunk_size = len & ~Z_CRC32_SSE42_CHUNKSIZE_MASK;
+        crc = ~crc32_sse42_simd_(buf, chunk_size, ~(uint32_t)crc);
+        /* check remaining data */
+        len -= chunk_size;
+        if (!len)
+            return crc;
+        /* Fall into the default crc32 for the remaining data. */
+        buf += chunk_size;
+    }
+#else
+    if (buf == Z_NULL) {
+        return 0UL;
+    }
+#endif /* CRC32_SIMD_SSE42_PCLMUL */
 
 #ifdef DYNAMIC_CRC_TABLE
     if (crc_table_empty)
@@ -235,8 +262,29 @@ unsigned long ZEXPORT crc32(crc, buf, len)
     return crc ^ 0xffffffffUL;
 }
 
+/* ========================================================================= */
+unsigned long ZEXPORT crc32(crc, buf, len)
+    unsigned long crc;
+    const unsigned char FAR *buf;
+    uInt len;
+{
+    return crc32_z(crc, buf, len);
+}
+
 #ifdef BYFOUR
 
+/*
+   This BYFOUR code accesses the passed unsigned char * buffer with a 32-bit
+   integer pointer type. This violates the strict aliasing rule, where a
+   compiler can assume, for optimization purposes, that two pointers to
+   fundamentally different types won't ever point to the same memory. This can
+   manifest as a problem only if one of the pointers is written to. This code
+   only reads from those pointers. So long as this code remains isolated in
+   this compilation unit, there won't be a problem. For this reason, this code
+   should not be copied and pasted into a compilation unit in which other code
+   writes to the buffer that is passed to these routines.
+ */
+
 /* ========================================================================= */
 #define DOLIT4 c ^= *buf4++; \
         c = crc_table[3][c & 0xff] ^ crc_table[2][(c >> 8) & 0xff] ^ \
@@ -247,7 +295,7 @@ unsigned long ZEXPORT crc32(crc, buf, len)
 local unsigned long crc32_little(crc, buf, len)
     unsigned long crc;
     const unsigned char FAR *buf;
-    unsigned len;
+    z_size_t len;
 {
     register z_crc_t c;
     register const z_crc_t FAR *buf4;
@@ -278,7 +326,7 @@ local unsigned long crc32_little(crc, buf, len)
 }
 
 /* ========================================================================= */
-#define DOBIG4 c ^= *++buf4; \
+#define DOBIG4 c ^= *buf4++; \
         c = crc_table[4][c & 0xff] ^ crc_table[5][(c >> 8) & 0xff] ^ \
             crc_table[6][(c >> 16) & 0xff] ^ crc_table[7][c >> 24]
 #define DOBIG32 DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4
@@ -287,7 +335,7 @@ local unsigned long crc32_little(crc, buf, len)
 local unsigned long crc32_big(crc, buf, len)
     unsigned long crc;
     const unsigned char FAR *buf;
-    unsigned len;
+    z_size_t len;
 {
     register z_crc_t c;
     register const z_crc_t FAR *buf4;
@@ -300,7 +348,6 @@ local unsigned long crc32_big(crc, buf, len)
     }
 
     buf4 = (const z_crc_t FAR *)(const void FAR *)buf;
-    buf4--;
     while (len >= 32) {
         DOBIG32;
         len -= 32;
@@ -309,7 +356,6 @@ local unsigned long crc32_big(crc, buf, len)
         DOBIG4;
         len -= 4;
     }
-    buf4++;
     buf = (const unsigned char FAR *)buf4;
 
     if (len) do {
@@ -423,3 +469,28 @@ uLong ZEXPORT crc32_combine64(crc1, crc2, len2)
 {
     return crc32_combine_(crc1, crc2, len2);
 }
+
+ZLIB_INTERNAL void crc_reset(deflate_state *const s)
+{
+    if (x86_cpu_enable_simd) {
+        crc_fold_init(s);
+        return;
+    }
+    s->strm->adler = crc32(0L, Z_NULL, 0);
+}
+
+ZLIB_INTERNAL void crc_finalize(deflate_state *const s)
+{
+    if (x86_cpu_enable_simd)
+        s->strm->adler = crc_fold_512to32(s);
+}
+
+ZLIB_INTERNAL void copy_with_crc(z_streamp strm, Bytef *dst, long size)
+{
+    if (x86_cpu_enable_simd) {
+        crc_fold_copy(strm->state, dst, strm->next_in, size);
+        return;
+    }
+    zmemcpy(dst, strm->next_in, size);
+    strm->adler = crc32(strm->adler, dst, size);
+}
diff --git a/modules/zlib/src/crc32_simd.c b/modules/zlib/src/crc32_simd.c
new file mode 100644
index 000000000..653865221
--- /dev/null
+++ b/modules/zlib/src/crc32_simd.c
@@ -0,0 +1,157 @@
+/* crc32_simd.c
+ *
+ * Copyright 2017 The Chromium Authors. All rights reserved.
+ * Use of this source code is governed by a BSD-style license that can be
+ * found in the Chromium source repository LICENSE file.
+ */
+
+#include "crc32_simd.h"
+
+#if defined(CRC32_SIMD_SSE42_PCLMUL)
+
+/*
+ * crc32_sse42_simd_(): compute the crc32 of the buffer, where the buffer
+ * length must be at least 64, and a multiple of 16. Based on:
+ *
+ * "Fast CRC Computation for Generic Polynomials Using PCLMULQDQ Instruction"
+ *  V. Gopal, E. Ozturk, et al., 2009, http://intel.ly/2ySEwL0
+ */
+
+#include <emmintrin.h>
+#include <smmintrin.h>
+#include <wmmintrin.h>
+
+uint32_t ZLIB_INTERNAL crc32_sse42_simd_(  /* SSE4.2+PCLMUL */
+    const unsigned char *buf,
+    z_size_t len,
+    uint32_t crc)
+{
+    /*
+     * Definitions of the bit-reflected domain constants k1,k2,k3, etc and
+     * the CRC32+Barrett polynomials given at the end of the paper.
+     */
+    static const uint64_t zalign(16) k1k2[] = { 0x0154442bd4, 0x01c6e41596 };
+    static const uint64_t zalign(16) k3k4[] = { 0x01751997d0, 0x00ccaa009e };
+    static const uint64_t zalign(16) k5k0[] = { 0x0163cd6124, 0x0000000000 };
+    static const uint64_t zalign(16) poly[] = { 0x01db710641, 0x01f7011641 };
+
+    __m128i x0, x1, x2, x3, x4, x5, x6, x7, x8, y5, y6, y7, y8;
+
+    /*
+     * There's at least one block of 64.
+     */
+    x1 = _mm_loadu_si128((__m128i *)(buf + 0x00));
+    x2 = _mm_loadu_si128((__m128i *)(buf + 0x10));
+    x3 = _mm_loadu_si128((__m128i *)(buf + 0x20));
+    x4 = _mm_loadu_si128((__m128i *)(buf + 0x30));
+
+    x1 = _mm_xor_si128(x1, _mm_cvtsi32_si128(crc));
+
+    x0 = _mm_load_si128((__m128i *)k1k2);
+
+    buf += 64;
+    len -= 64;
+
+    /*
+     * Parallel fold blocks of 64, if any.
+     */
+    while (len >= 64)
+    {
+        x5 = _mm_clmulepi64_si128(x1, x0, 0x00);
+        x6 = _mm_clmulepi64_si128(x2, x0, 0x00);
+        x7 = _mm_clmulepi64_si128(x3, x0, 0x00);
+        x8 = _mm_clmulepi64_si128(x4, x0, 0x00);
+
+        x1 = _mm_clmulepi64_si128(x1, x0, 0x11);
+        x2 = _mm_clmulepi64_si128(x2, x0, 0x11);
+        x3 = _mm_clmulepi64_si128(x3, x0, 0x11);
+        x4 = _mm_clmulepi64_si128(x4, x0, 0x11);
+
+        y5 = _mm_loadu_si128((__m128i *)(buf + 0x00));
+        y6 = _mm_loadu_si128((__m128i *)(buf + 0x10));
+        y7 = _mm_loadu_si128((__m128i *)(buf + 0x20));
+        y8 = _mm_loadu_si128((__m128i *)(buf + 0x30));
+
+        x1 = _mm_xor_si128(x1, x5);
+        x2 = _mm_xor_si128(x2, x6);
+        x3 = _mm_xor_si128(x3, x7);
+        x4 = _mm_xor_si128(x4, x8);
+
+        x1 = _mm_xor_si128(x1, y5);
+        x2 = _mm_xor_si128(x2, y6);
+        x3 = _mm_xor_si128(x3, y7);
+        x4 = _mm_xor_si128(x4, y8);
+
+        buf += 64;
+        len -= 64;
+    }
+
+    /*
+     * Fold into 128-bits.
+     */
+    x0 = _mm_load_si128((__m128i *)k3k4);
+
+    x5 = _mm_clmulepi64_si128(x1, x0, 0x00);
+    x1 = _mm_clmulepi64_si128(x1, x0, 0x11);
+    x1 = _mm_xor_si128(x1, x2);
+    x1 = _mm_xor_si128(x1, x5);
+
+    x5 = _mm_clmulepi64_si128(x1, x0, 0x00);
+    x1 = _mm_clmulepi64_si128(x1, x0, 0x11);
+    x1 = _mm_xor_si128(x1, x3);
+    x1 = _mm_xor_si128(x1, x5);
+
+    x5 = _mm_clmulepi64_si128(x1, x0, 0x00);
+    x1 = _mm_clmulepi64_si128(x1, x0, 0x11);
+    x1 = _mm_xor_si128(x1, x4);
+    x1 = _mm_xor_si128(x1, x5);
+
+    /*
+     * Single fold blocks of 16, if any.
+     */
+    while (len >= 16)
+    {
+        x2 = _mm_loadu_si128((__m128i *)buf);
+
+        x5 = _mm_clmulepi64_si128(x1, x0, 0x00);
+        x1 = _mm_clmulepi64_si128(x1, x0, 0x11);
+        x1 = _mm_xor_si128(x1, x2);
+        x1 = _mm_xor_si128(x1, x5);
+
+        buf += 16;
+        len -= 16;
+    }
+
+    /*
+     * Fold 128-bits to 64-bits.
+     */
+    x2 = _mm_clmulepi64_si128(x1, x0, 0x10);
+    x3 = _mm_setr_epi32(~0, 0, ~0, 0);
+    x1 = _mm_srli_si128(x1, 8);
+    x1 = _mm_xor_si128(x1, x2);
+
+    x0 = _mm_loadl_epi64((__m128i*)k5k0);
+
+    x2 = _mm_srli_si128(x1, 4);
+    x1 = _mm_and_si128(x1, x3);
+    x1 = _mm_clmulepi64_si128(x1, x0, 0x00);
+    x1 = _mm_xor_si128(x1, x2);
+
+    /*
+     * Barret reduce to 32-bits.
+     */
+    x0 = _mm_load_si128((__m128i*)poly);
+
+    x2 = _mm_and_si128(x1, x3);
+    x2 = _mm_clmulepi64_si128(x2, x0, 0x10);
+    x2 = _mm_and_si128(x2, x3);
+    x2 = _mm_clmulepi64_si128(x2, x0, 0x00);
+    x1 = _mm_xor_si128(x1, x2);
+
+    /*
+     * Return the crc32.
+     */
+    return _mm_extract_epi32(x1, 1);
+}
+
+#endif  /* CRC32_SIMD_SSE42_PCLMUL */
diff --git a/modules/zlib/src/crc32_simd.h b/modules/zlib/src/crc32_simd.h
new file mode 100644
index 000000000..4e6f3268e
--- /dev/null
+++ b/modules/zlib/src/crc32_simd.h
@@ -0,0 +1,27 @@
+/* crc32_simd.h
+ *
+ * Copyright 2017 The Chromium Authors. All rights reserved.
+ * Use of this source code is governed by a BSD-style license that can be
+ * found in the Chromium source repository LICENSE file.
+ */
+
+#include <stdint.h>
+
+#include "zconf.h"
+#include "zutil.h"
+
+/*
+ * crc32_sse42_simd_(): compute the crc32 of the buffer, where the buffer
+ * length must be at least 64, and a multiple of 16.
+ */
+uint32_t ZLIB_INTERNAL crc32_sse42_simd_(
+    const unsigned char *buf,
+    z_size_t len,
+    uint32_t crc);
+
+/*
+ * crc32_sse42_simd_ buffer size constraints: see the use in zlib/crc32.c
+ * for computing the crc32 of an arbitrary length buffer.
+ */
+#define Z_CRC32_SSE42_MINIMUM_LENGTH 64
+#define Z_CRC32_SSE42_CHUNKSIZE_MASK 15
diff --git a/modules/zlib/src/crc_folding.c b/modules/zlib/src/crc_folding.c
new file mode 100644
index 000000000..48d77744a
--- /dev/null
+++ b/modules/zlib/src/crc_folding.c
@@ -0,0 +1,493 @@
+/*
+ * Compute the CRC32 using a parallelized folding approach with the PCLMULQDQ
+ * instruction.
+ *
+ * A white paper describing this algorithm can be found at:
+ * http://www.intel.com/content/dam/www/public/us/en/documents/white-papers/fast-crc-computation-generic-polynomials-pclmulqdq-paper.pdf
+ *
+ * Copyright (C) 2013 Intel Corporation. All rights reserved.
+ * Authors:
+ * 	Wajdi Feghali   <wajdi.k.feghali@intel.com>
+ * 	Jim Guilford    <james.guilford@intel.com>
+ * 	Vinodh Gopal    <vinodh.gopal@intel.com>
+ * 	Erdinc Ozturk   <erdinc.ozturk@intel.com>
+ * 	Jim Kukunas     <james.t.kukunas@linux.intel.com>
+ *
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+#include "deflate.h"
+
+#include <inttypes.h>
+#include <emmintrin.h>
+#include <immintrin.h>
+#include <wmmintrin.h>
+
+#define CRC_LOAD(s) \
+    do { \
+        __m128i xmm_crc0 = _mm_loadu_si128((__m128i *)s->crc0 + 0);\
+        __m128i xmm_crc1 = _mm_loadu_si128((__m128i *)s->crc0 + 1);\
+        __m128i xmm_crc2 = _mm_loadu_si128((__m128i *)s->crc0 + 2);\
+        __m128i xmm_crc3 = _mm_loadu_si128((__m128i *)s->crc0 + 3);\
+        __m128i xmm_crc_part = _mm_loadu_si128((__m128i *)s->crc0 + 4);
+
+#define CRC_SAVE(s) \
+        _mm_storeu_si128((__m128i *)s->crc0 + 0, xmm_crc0);\
+        _mm_storeu_si128((__m128i *)s->crc0 + 1, xmm_crc1);\
+        _mm_storeu_si128((__m128i *)s->crc0 + 2, xmm_crc2);\
+        _mm_storeu_si128((__m128i *)s->crc0 + 3, xmm_crc3);\
+        _mm_storeu_si128((__m128i *)s->crc0 + 4, xmm_crc_part);\
+    } while (0);
+
+ZLIB_INTERNAL void crc_fold_init(deflate_state *const s)
+{
+    CRC_LOAD(s)
+
+    xmm_crc0 = _mm_cvtsi32_si128(0x9db42487);
+    xmm_crc1 = _mm_setzero_si128();
+    xmm_crc2 = _mm_setzero_si128();
+    xmm_crc3 = _mm_setzero_si128();
+
+    CRC_SAVE(s)
+
+    s->strm->adler = 0;
+}
+
+local void fold_1(deflate_state *const s,
+        __m128i *xmm_crc0, __m128i *xmm_crc1,
+        __m128i *xmm_crc2, __m128i *xmm_crc3)
+{
+    const __m128i xmm_fold4 = _mm_set_epi32(
+            0x00000001, 0x54442bd4,
+            0x00000001, 0xc6e41596);
+
+    __m128i x_tmp3;
+    __m128 ps_crc0, ps_crc3, ps_res;
+
+    x_tmp3 = *xmm_crc3;
+
+    *xmm_crc3 = *xmm_crc0;
+    *xmm_crc0 = _mm_clmulepi64_si128(*xmm_crc0, xmm_fold4, 0x01);
+    *xmm_crc3 = _mm_clmulepi64_si128(*xmm_crc3, xmm_fold4, 0x10);
+    ps_crc0 = _mm_castsi128_ps(*xmm_crc0);
+    ps_crc3 = _mm_castsi128_ps(*xmm_crc3);
+    ps_res = _mm_xor_ps(ps_crc0, ps_crc3);
+
+    *xmm_crc0 = *xmm_crc1;
+    *xmm_crc1 = *xmm_crc2;
+    *xmm_crc2 = x_tmp3;
+    *xmm_crc3 = _mm_castps_si128(ps_res);
+}
+
+local void fold_2(deflate_state *const s,
+        __m128i *xmm_crc0, __m128i *xmm_crc1,
+        __m128i *xmm_crc2, __m128i *xmm_crc3)
+{
+    const __m128i xmm_fold4 = _mm_set_epi32(
+            0x00000001, 0x54442bd4,
+            0x00000001, 0xc6e41596);
+
+    __m128i x_tmp3, x_tmp2;
+    __m128 ps_crc0, ps_crc1, ps_crc2, ps_crc3, ps_res31, ps_res20;
+
+    x_tmp3 = *xmm_crc3;
+    x_tmp2 = *xmm_crc2;
+
+    *xmm_crc3 = *xmm_crc1;
+    *xmm_crc1 = _mm_clmulepi64_si128(*xmm_crc1, xmm_fold4, 0x01);
+    *xmm_crc3 = _mm_clmulepi64_si128(*xmm_crc3, xmm_fold4, 0x10);
+    ps_crc3 = _mm_castsi128_ps(*xmm_crc3);
+    ps_crc1 = _mm_castsi128_ps(*xmm_crc1);
+    ps_res31= _mm_xor_ps(ps_crc3, ps_crc1);
+
+    *xmm_crc2 = *xmm_crc0;
+    *xmm_crc0 = _mm_clmulepi64_si128(*xmm_crc0, xmm_fold4, 0x01);
+    *xmm_crc2 = _mm_clmulepi64_si128(*xmm_crc2, xmm_fold4, 0x10);
+    ps_crc0 = _mm_castsi128_ps(*xmm_crc0);
+    ps_crc2 = _mm_castsi128_ps(*xmm_crc2);
+    ps_res20= _mm_xor_ps(ps_crc0, ps_crc2);
+
+    *xmm_crc0 = x_tmp2;
+    *xmm_crc1 = x_tmp3;
+    *xmm_crc2 = _mm_castps_si128(ps_res20);
+    *xmm_crc3 = _mm_castps_si128(ps_res31);
+}
+
+local void fold_3(deflate_state *const s,
+        __m128i *xmm_crc0, __m128i *xmm_crc1,
+        __m128i *xmm_crc2, __m128i *xmm_crc3)
+{
+    const __m128i xmm_fold4 = _mm_set_epi32(
+            0x00000001, 0x54442bd4,
+            0x00000001, 0xc6e41596);
+
+    __m128i x_tmp3;
+    __m128 ps_crc0, ps_crc1, ps_crc2, ps_crc3, ps_res32, ps_res21, ps_res10;
+
+    x_tmp3 = *xmm_crc3;
+
+    *xmm_crc3 = *xmm_crc2;
+    *xmm_crc2 = _mm_clmulepi64_si128(*xmm_crc2, xmm_fold4, 0x01);
+    *xmm_crc3 = _mm_clmulepi64_si128(*xmm_crc3, xmm_fold4, 0x10);
+    ps_crc2 = _mm_castsi128_ps(*xmm_crc2);
+    ps_crc3 = _mm_castsi128_ps(*xmm_crc3);
+    ps_res32 = _mm_xor_ps(ps_crc2, ps_crc3);
+
+    *xmm_crc2 = *xmm_crc1;
+    *xmm_crc1 = _mm_clmulepi64_si128(*xmm_crc1, xmm_fold4, 0x01);
+    *xmm_crc2 = _mm_clmulepi64_si128(*xmm_crc2, xmm_fold4, 0x10);
+    ps_crc1 = _mm_castsi128_ps(*xmm_crc1);
+    ps_crc2 = _mm_castsi128_ps(*xmm_crc2);
+    ps_res21= _mm_xor_ps(ps_crc1, ps_crc2);
+
+    *xmm_crc1 = *xmm_crc0;
+    *xmm_crc0 = _mm_clmulepi64_si128(*xmm_crc0, xmm_fold4, 0x01);
+    *xmm_crc1 = _mm_clmulepi64_si128(*xmm_crc1, xmm_fold4, 0x10);
+    ps_crc0 = _mm_castsi128_ps(*xmm_crc0);
+    ps_crc1 = _mm_castsi128_ps(*xmm_crc1);
+    ps_res10= _mm_xor_ps(ps_crc0, ps_crc1);
+
+    *xmm_crc0 = x_tmp3;
+    *xmm_crc1 = _mm_castps_si128(ps_res10);
+    *xmm_crc2 = _mm_castps_si128(ps_res21);
+    *xmm_crc3 = _mm_castps_si128(ps_res32);
+}
+
+local void fold_4(deflate_state *const s,
+        __m128i *xmm_crc0, __m128i *xmm_crc1,
+        __m128i *xmm_crc2, __m128i *xmm_crc3)
+{
+    const __m128i xmm_fold4 = _mm_set_epi32(
+            0x00000001, 0x54442bd4,
+            0x00000001, 0xc6e41596);
+
+    __m128i x_tmp0, x_tmp1, x_tmp2, x_tmp3;
+    __m128 ps_crc0, ps_crc1, ps_crc2, ps_crc3;
+    __m128 ps_t0, ps_t1, ps_t2, ps_t3;
+    __m128 ps_res0, ps_res1, ps_res2, ps_res3;
+
+    x_tmp0 = *xmm_crc0;
+    x_tmp1 = *xmm_crc1;
+    x_tmp2 = *xmm_crc2;
+    x_tmp3 = *xmm_crc3;
+
+    *xmm_crc0 = _mm_clmulepi64_si128(*xmm_crc0, xmm_fold4, 0x01);
+    x_tmp0 = _mm_clmulepi64_si128(x_tmp0, xmm_fold4, 0x10);
+    ps_crc0 = _mm_castsi128_ps(*xmm_crc0);
+    ps_t0 = _mm_castsi128_ps(x_tmp0);
+    ps_res0 = _mm_xor_ps(ps_crc0, ps_t0);
+
+    *xmm_crc1 = _mm_clmulepi64_si128(*xmm_crc1, xmm_fold4, 0x01);
+    x_tmp1 = _mm_clmulepi64_si128(x_tmp1, xmm_fold4, 0x10);
+    ps_crc1 = _mm_castsi128_ps(*xmm_crc1);
+    ps_t1 = _mm_castsi128_ps(x_tmp1);
+    ps_res1 = _mm_xor_ps(ps_crc1, ps_t1);
+
+    *xmm_crc2 = _mm_clmulepi64_si128(*xmm_crc2, xmm_fold4, 0x01);
+    x_tmp2 = _mm_clmulepi64_si128(x_tmp2, xmm_fold4, 0x10);
+    ps_crc2 = _mm_castsi128_ps(*xmm_crc2);
+    ps_t2 = _mm_castsi128_ps(x_tmp2);
+    ps_res2 = _mm_xor_ps(ps_crc2, ps_t2);
+
+    *xmm_crc3 = _mm_clmulepi64_si128(*xmm_crc3, xmm_fold4, 0x01);
+    x_tmp3 = _mm_clmulepi64_si128(x_tmp3, xmm_fold4, 0x10);
+    ps_crc3 = _mm_castsi128_ps(*xmm_crc3);
+    ps_t3 = _mm_castsi128_ps(x_tmp3);
+    ps_res3 = _mm_xor_ps(ps_crc3, ps_t3);
+
+    *xmm_crc0 = _mm_castps_si128(ps_res0);
+    *xmm_crc1 = _mm_castps_si128(ps_res1);
+    *xmm_crc2 = _mm_castps_si128(ps_res2);
+    *xmm_crc3 = _mm_castps_si128(ps_res3);
+}
+
+local const unsigned zalign(32) pshufb_shf_table[60] = {
+	0x84838281,0x88878685,0x8c8b8a89,0x008f8e8d, /* shl 15 (16 - 1)/shr1 */
+	0x85848382,0x89888786,0x8d8c8b8a,0x01008f8e, /* shl 14 (16 - 3)/shr2 */
+	0x86858483,0x8a898887,0x8e8d8c8b,0x0201008f, /* shl 13 (16 - 4)/shr3 */
+	0x87868584,0x8b8a8988,0x8f8e8d8c,0x03020100, /* shl 12 (16 - 4)/shr4 */
+	0x88878685,0x8c8b8a89,0x008f8e8d,0x04030201, /* shl 11 (16 - 5)/shr5 */
+	0x89888786,0x8d8c8b8a,0x01008f8e,0x05040302, /* shl 10 (16 - 6)/shr6 */
+	0x8a898887,0x8e8d8c8b,0x0201008f,0x06050403, /* shl  9 (16 - 7)/shr7 */
+	0x8b8a8988,0x8f8e8d8c,0x03020100,0x07060504, /* shl  8 (16 - 8)/shr8 */
+	0x8c8b8a89,0x008f8e8d,0x04030201,0x08070605, /* shl  7 (16 - 9)/shr9 */
+	0x8d8c8b8a,0x01008f8e,0x05040302,0x09080706, /* shl  6 (16 -10)/shr10*/
+	0x8e8d8c8b,0x0201008f,0x06050403,0x0a090807, /* shl  5 (16 -11)/shr11*/
+	0x8f8e8d8c,0x03020100,0x07060504,0x0b0a0908, /* shl  4 (16 -12)/shr12*/
+	0x008f8e8d,0x04030201,0x08070605,0x0c0b0a09, /* shl  3 (16 -13)/shr13*/
+	0x01008f8e,0x05040302,0x09080706,0x0d0c0b0a, /* shl  2 (16 -14)/shr14*/
+	0x0201008f,0x06050403,0x0a090807,0x0e0d0c0b  /* shl  1 (16 -15)/shr15*/
+};
+
+local void partial_fold(deflate_state *const s, const size_t len,
+        __m128i *xmm_crc0, __m128i *xmm_crc1,
+        __m128i *xmm_crc2, __m128i *xmm_crc3,
+        __m128i *xmm_crc_part)
+{
+
+    const __m128i xmm_fold4 = _mm_set_epi32(
+            0x00000001, 0x54442bd4,
+            0x00000001, 0xc6e41596);
+    const __m128i xmm_mask3 = _mm_set1_epi32(0x80808080);
+
+    __m128i xmm_shl, xmm_shr, xmm_tmp1, xmm_tmp2, xmm_tmp3;
+    __m128i xmm_a0_0, xmm_a0_1;
+    __m128 ps_crc3, psa0_0, psa0_1, ps_res;
+
+    xmm_shl = _mm_load_si128((__m128i *)pshufb_shf_table + (len - 1));
+    xmm_shr = xmm_shl;
+    xmm_shr = _mm_xor_si128(xmm_shr, xmm_mask3);
+
+    xmm_a0_0 = _mm_shuffle_epi8(*xmm_crc0, xmm_shl);
+
+    *xmm_crc0 = _mm_shuffle_epi8(*xmm_crc0, xmm_shr);
+    xmm_tmp1 = _mm_shuffle_epi8(*xmm_crc1, xmm_shl);
+    *xmm_crc0 = _mm_or_si128(*xmm_crc0, xmm_tmp1);
+
+    *xmm_crc1 = _mm_shuffle_epi8(*xmm_crc1, xmm_shr);
+    xmm_tmp2 = _mm_shuffle_epi8(*xmm_crc2, xmm_shl);
+    *xmm_crc1 = _mm_or_si128(*xmm_crc1, xmm_tmp2);
+
+    *xmm_crc2 = _mm_shuffle_epi8(*xmm_crc2, xmm_shr);
+    xmm_tmp3 = _mm_shuffle_epi8(*xmm_crc3, xmm_shl);
+    *xmm_crc2 = _mm_or_si128(*xmm_crc2, xmm_tmp3);
+
+    *xmm_crc3 = _mm_shuffle_epi8(*xmm_crc3, xmm_shr);
+    *xmm_crc_part = _mm_shuffle_epi8(*xmm_crc_part, xmm_shl);
+    *xmm_crc3 = _mm_or_si128(*xmm_crc3, *xmm_crc_part);
+
+    xmm_a0_1 = _mm_clmulepi64_si128(xmm_a0_0, xmm_fold4, 0x10);
+    xmm_a0_0 = _mm_clmulepi64_si128(xmm_a0_0, xmm_fold4, 0x01);
+
+    ps_crc3 = _mm_castsi128_ps(*xmm_crc3);
+    psa0_0 = _mm_castsi128_ps(xmm_a0_0);
+    psa0_1 = _mm_castsi128_ps(xmm_a0_1);
+
+    ps_res = _mm_xor_ps(ps_crc3, psa0_0);
+    ps_res = _mm_xor_ps(ps_res, psa0_1);
+
+    *xmm_crc3 = _mm_castps_si128(ps_res);
+}
+
+ZLIB_INTERNAL void crc_fold_copy(deflate_state *const s,
+        unsigned char *dst, const unsigned char *src, long len)
+{
+    unsigned long algn_diff;
+    __m128i xmm_t0, xmm_t1, xmm_t2, xmm_t3;
+
+    CRC_LOAD(s)
+
+    if (len < 16) {
+        if (len == 0)
+            return;
+        goto partial;
+    }
+
+    algn_diff = 0 - (uintptr_t)src & 0xF;
+    if (algn_diff) {
+        xmm_crc_part = _mm_loadu_si128((__m128i *)src);
+        _mm_storeu_si128((__m128i *)dst, xmm_crc_part);
+
+        dst += algn_diff;
+        src += algn_diff;
+        len -= algn_diff;
+
+        partial_fold(s, algn_diff, &xmm_crc0, &xmm_crc1, &xmm_crc2, &xmm_crc3,
+            &xmm_crc_part);
+    }
+
+    while ((len -= 64) >= 0) {
+        xmm_t0 = _mm_load_si128((__m128i *)src);
+        xmm_t1 = _mm_load_si128((__m128i *)src + 1);
+        xmm_t2 = _mm_load_si128((__m128i *)src + 2);
+        xmm_t3 = _mm_load_si128((__m128i *)src + 3);
+
+        fold_4(s, &xmm_crc0, &xmm_crc1, &xmm_crc2, &xmm_crc3);
+
+        _mm_storeu_si128((__m128i *)dst, xmm_t0);
+        _mm_storeu_si128((__m128i *)dst + 1, xmm_t1);
+        _mm_storeu_si128((__m128i *)dst + 2, xmm_t2);
+        _mm_storeu_si128((__m128i *)dst + 3, xmm_t3);
+
+        xmm_crc0 = _mm_xor_si128(xmm_crc0, xmm_t0);
+        xmm_crc1 = _mm_xor_si128(xmm_crc1, xmm_t1);
+        xmm_crc2 = _mm_xor_si128(xmm_crc2, xmm_t2);
+        xmm_crc3 = _mm_xor_si128(xmm_crc3, xmm_t3);
+
+        src += 64;
+        dst += 64;
+    }
+
+    /*
+     * len = num bytes left - 64
+     */
+    if (len + 16 >= 0) {
+        len += 16;
+
+        xmm_t0 = _mm_load_si128((__m128i *)src);
+        xmm_t1 = _mm_load_si128((__m128i *)src + 1);
+        xmm_t2 = _mm_load_si128((__m128i *)src + 2);
+
+        fold_3(s, &xmm_crc0, &xmm_crc1, &xmm_crc2, &xmm_crc3);
+
+        _mm_storeu_si128((__m128i *)dst, xmm_t0);
+        _mm_storeu_si128((__m128i *)dst + 1, xmm_t1);
+        _mm_storeu_si128((__m128i *)dst + 2, xmm_t2);
+
+        xmm_crc1 = _mm_xor_si128(xmm_crc1, xmm_t0);
+        xmm_crc2 = _mm_xor_si128(xmm_crc2, xmm_t1);
+        xmm_crc3 = _mm_xor_si128(xmm_crc3, xmm_t2);
+
+        if (len == 0)
+            goto done;
+
+        dst += 48;
+        src += 48;
+    } else if (len + 32 >= 0) {
+        len += 32;
+
+        xmm_t0 = _mm_load_si128((__m128i *)src);
+        xmm_t1 = _mm_load_si128((__m128i *)src + 1);
+
+        fold_2(s, &xmm_crc0, &xmm_crc1, &xmm_crc2, &xmm_crc3);
+
+        _mm_storeu_si128((__m128i *)dst, xmm_t0);
+        _mm_storeu_si128((__m128i *)dst + 1, xmm_t1);
+
+        xmm_crc2 = _mm_xor_si128(xmm_crc2, xmm_t0);
+        xmm_crc3 = _mm_xor_si128(xmm_crc3, xmm_t1);
+
+        if (len == 0)
+            goto done;
+
+        dst += 32;
+        src += 32;
+    } else if (len + 48 >= 0) {
+        len += 48;
+
+        xmm_t0 = _mm_load_si128((__m128i *)src);
+
+        fold_1(s, &xmm_crc0, &xmm_crc1, &xmm_crc2, &xmm_crc3);
+
+        _mm_storeu_si128((__m128i *)dst, xmm_t0);
+
+        xmm_crc3 = _mm_xor_si128(xmm_crc3, xmm_t0);
+
+        if (len == 0)
+            goto done;
+
+        dst += 16;
+        src += 16;
+    } else {
+        len += 64;
+        if (len == 0)
+            goto done;
+    }
+
+partial:
+
+#if defined(_MSC_VER)
+    /* VS does not permit the use of _mm_set_epi64x in 32-bit builds */
+    {
+        int32_t parts[4] = {0, 0, 0, 0};
+        memcpy(&parts, src, len);
+        xmm_crc_part = _mm_set_epi32(parts[3], parts[2], parts[1], parts[0]);
+    }
+#else
+    {
+        int64_t parts[2] = {0, 0};
+        memcpy(&parts, src, len);
+        xmm_crc_part = _mm_set_epi64x(parts[1], parts[0]);
+    }
+#endif
+
+    _mm_storeu_si128((__m128i *)dst, xmm_crc_part);
+    partial_fold(s, len, &xmm_crc0, &xmm_crc1, &xmm_crc2, &xmm_crc3,
+        &xmm_crc_part);
+done:
+    CRC_SAVE(s)
+}
+
+local const unsigned zalign(16) crc_k[] = {
+    0xccaa009e, 0x00000000, /* rk1 */
+    0x751997d0, 0x00000001, /* rk2 */
+    0xccaa009e, 0x00000000, /* rk5 */
+    0x63cd6124, 0x00000001, /* rk6 */
+    0xf7011640, 0x00000001, /* rk7 */
+    0xdb710640, 0x00000001  /* rk8 */
+};
+
+local const unsigned zalign(16) crc_mask[4] = {
+    0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000
+};
+
+local const unsigned zalign(16) crc_mask2[4] = {
+    0x00000000, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF
+};
+
+unsigned ZLIB_INTERNAL crc_fold_512to32(deflate_state *const s)
+{
+    const __m128i xmm_mask  = _mm_load_si128((__m128i *)crc_mask);
+    const __m128i xmm_mask2 = _mm_load_si128((__m128i *)crc_mask2);
+
+    unsigned crc;
+    __m128i x_tmp0, x_tmp1, x_tmp2, crc_fold;
+
+    CRC_LOAD(s)
+
+    /*
+     * k1
+     */
+    crc_fold = _mm_load_si128((__m128i *)crc_k);
+
+    x_tmp0 = _mm_clmulepi64_si128(xmm_crc0, crc_fold, 0x10);
+    xmm_crc0 = _mm_clmulepi64_si128(xmm_crc0, crc_fold, 0x01);
+    xmm_crc1 = _mm_xor_si128(xmm_crc1, x_tmp0);
+    xmm_crc1 = _mm_xor_si128(xmm_crc1, xmm_crc0);
+
+    x_tmp1 = _mm_clmulepi64_si128(xmm_crc1, crc_fold, 0x10);
+    xmm_crc1 = _mm_clmulepi64_si128(xmm_crc1, crc_fold, 0x01);
+    xmm_crc2 = _mm_xor_si128(xmm_crc2, x_tmp1);
+    xmm_crc2 = _mm_xor_si128(xmm_crc2, xmm_crc1);
+
+    x_tmp2 = _mm_clmulepi64_si128(xmm_crc2, crc_fold, 0x10);
+    xmm_crc2 = _mm_clmulepi64_si128(xmm_crc2, crc_fold, 0x01);
+    xmm_crc3 = _mm_xor_si128(xmm_crc3, x_tmp2);
+    xmm_crc3 = _mm_xor_si128(xmm_crc3, xmm_crc2);
+
+    /*
+     * k5
+     */
+    crc_fold = _mm_load_si128((__m128i *)crc_k + 1);
+
+    xmm_crc0 = xmm_crc3;
+    xmm_crc3 = _mm_clmulepi64_si128(xmm_crc3, crc_fold, 0);
+    xmm_crc0 = _mm_srli_si128(xmm_crc0, 8);
+    xmm_crc3 = _mm_xor_si128(xmm_crc3, xmm_crc0);
+
+    xmm_crc0 = xmm_crc3;
+    xmm_crc3 = _mm_slli_si128(xmm_crc3, 4);
+    xmm_crc3 = _mm_clmulepi64_si128(xmm_crc3, crc_fold, 0x10);
+    xmm_crc3 = _mm_xor_si128(xmm_crc3, xmm_crc0);
+    xmm_crc3 = _mm_and_si128(xmm_crc3, xmm_mask2);
+
+    /*
+     * k7
+     */
+    xmm_crc1 = xmm_crc3;
+    xmm_crc2 = xmm_crc3;
+    crc_fold = _mm_load_si128((__m128i *)crc_k + 2);
+
+    xmm_crc3 = _mm_clmulepi64_si128(xmm_crc3, crc_fold, 0);
+    xmm_crc3 = _mm_xor_si128(xmm_crc3, xmm_crc2);
+    xmm_crc3 = _mm_and_si128(xmm_crc3, xmm_mask);
+
+    xmm_crc2 = xmm_crc3;
+    xmm_crc3 = _mm_clmulepi64_si128(xmm_crc3, crc_fold, 0x10);
+    xmm_crc3 = _mm_xor_si128(xmm_crc3, xmm_crc2);
+    xmm_crc3 = _mm_xor_si128(xmm_crc3, xmm_crc1);
+
+    crc = _mm_extract_epi32(xmm_crc3, 2);
+    return ~crc;
+    CRC_SAVE(s)
+}
diff --git a/modules/zlib/src/deflate.c b/modules/zlib/src/deflate.c
index 696957705..6fe9c7e09 100644
--- a/modules/zlib/src/deflate.c
+++ b/modules/zlib/src/deflate.c
@@ -1,5 +1,5 @@
 /* deflate.c -- compress data using the deflation algorithm
- * Copyright (C) 1995-2013 Jean-loup Gailly and Mark Adler
+ * Copyright (C) 1995-2017 Jean-loup Gailly and Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -48,11 +48,12 @@
  */
 
 /* @(#) $Id$ */
-
+#include <assert.h>
 #include "deflate.h"
+#include "x86.h"
 
 const char deflate_copyright[] =
-   " deflate 1.2.8 Copyright 1995-2013 Jean-loup Gailly and Mark Adler ";
+   " deflate 1.2.11 Copyright 1995-2017 Jean-loup Gailly and Mark Adler ";
 /*
   If you use the zlib library in a product, an acknowledgment is welcome
   in the documentation of your product. If for some reason you cannot
@@ -73,6 +74,8 @@ typedef enum {
 typedef block_state (*compress_func) OF((deflate_state *s, int flush));
 /* Compression function. Returns the block state after the call. */
 
+local int deflateStateCheck      OF((z_streamp strm));
+local void slide_hash     OF((deflate_state *s));
 local void fill_window    OF((deflate_state *s));
 local block_state deflate_stored OF((deflate_state *s, int flush));
 local block_state deflate_fast   OF((deflate_state *s, int flush));
@@ -84,19 +87,34 @@ local block_state deflate_huff   OF((deflate_state *s, int flush));
 local void lm_init        OF((deflate_state *s));
 local void putShortMSB    OF((deflate_state *s, uInt b));
 local void flush_pending  OF((z_streamp strm));
-local int read_buf        OF((z_streamp strm, Bytef *buf, unsigned size));
+unsigned ZLIB_INTERNAL deflate_read_buf OF((z_streamp strm, Bytef *buf, unsigned size));
 #ifdef ASMV
+#  pragma message("Assembler code may have bugs -- use at your own risk")
       void match_init OF((void)); /* asm code initialization */
       uInt longest_match  OF((deflate_state *s, IPos cur_match));
 #else
 local uInt longest_match  OF((deflate_state *s, IPos cur_match));
 #endif
 
-#ifdef DEBUG
+#ifdef ZLIB_DEBUG
 local  void check_match OF((deflate_state *s, IPos start, IPos match,
                             int length));
 #endif
 
+/* From crc32.c */
+extern void ZLIB_INTERNAL crc_reset(deflate_state *const s);
+extern void ZLIB_INTERNAL crc_finalize(deflate_state *const s);
+extern void ZLIB_INTERNAL copy_with_crc(z_streamp strm, Bytef *dst, long size);
+
+#ifdef _MSC_VER
+#define INLINE __inline
+#else
+#define INLINE inline
+#endif
+
+/* Inline optimisation */
+local INLINE Pos insert_string_sse(deflate_state *const s, const Pos str);
+
 /* ===========================================================================
  * Local data
  */
@@ -148,46 +166,49 @@ local const config configuration_table[10] = {
  * meaning.
  */
 
-#define EQUAL 0
-/* result of memcmp for equal strings */
-
-#ifndef NO_DUMMY_DECL
-struct static_tree_desc_s {int dummy;}; /* for buggy compilers */
-#endif
-
 /* rank Z_BLOCK between Z_NO_FLUSH and Z_PARTIAL_FLUSH */
-#define RANK(f) (((f) << 1) - ((f) > 4 ? 9 : 0))
+#define RANK(f) (((f) * 2) - ((f) > 4 ? 9 : 0))
 
 /* ===========================================================================
  * Update a hash value with the given input byte
- * IN  assertion: all calls to to UPDATE_HASH are made with consecutive
- *    input characters, so that a running hash key can be computed from the
- *    previous key instead of complete recalculation each time.
+ * IN  assertion: all calls to UPDATE_HASH are made with consecutive input
+ *    characters, so that a running hash key can be computed from the previous
+ *    key instead of complete recalculation each time.
  */
 #define UPDATE_HASH(s,h,c) (h = (((h)<<s->hash_shift) ^ (c)) & s->hash_mask)
 
-
 /* ===========================================================================
  * Insert string str in the dictionary and set match_head to the previous head
  * of the hash chain (the most recent string with same hash key). Return
  * the previous length of the hash chain.
  * If this file is compiled with -DFASTEST, the compression level is forced
  * to 1, and no hash chains are maintained.
- * IN  assertion: all calls to to INSERT_STRING are made with consecutive
- *    input characters and the first MIN_MATCH bytes of str are valid
- *    (except for the last MIN_MATCH-1 bytes of the input file).
+ * IN  assertion: all calls to INSERT_STRING are made with consecutive input
+ *    characters and the first MIN_MATCH bytes of str are valid (except for
+ *    the last MIN_MATCH-1 bytes of the input file).
  */
+local INLINE Pos insert_string_c(deflate_state *const s, const Pos str)
+{
+    Pos ret;
+
+    UPDATE_HASH(s, s->ins_h, s->window[(str) + (MIN_MATCH-1)]);
 #ifdef FASTEST
-#define INSERT_STRING(s, str, match_head) \
-   (UPDATE_HASH(s, s->ins_h, s->window[(str) + (MIN_MATCH-1)]), \
-    match_head = s->head[s->ins_h], \
-    s->head[s->ins_h] = (Pos)(str))
+    ret = s->head[s->ins_h];
 #else
-#define INSERT_STRING(s, str, match_head) \
-   (UPDATE_HASH(s, s->ins_h, s->window[(str) + (MIN_MATCH-1)]), \
-    match_head = s->prev[(str) & s->w_mask] = s->head[s->ins_h], \
-    s->head[s->ins_h] = (Pos)(str))
+    ret = s->prev[str & s->w_mask] = s->head[s->ins_h];
 #endif
+    s->head[s->ins_h] = str;
+
+    return ret;
+}
+
+local INLINE Pos insert_string(deflate_state *const s, const Pos str)
+{
+    if (x86_cpu_enable_simd)
+        return insert_string_sse(s, str);
+    return insert_string_c(s, str);
+}
+
 
 /* ===========================================================================
  * Initialize the hash table (avoiding 64K overflow for 16 bit systems).
@@ -197,6 +218,37 @@ struct static_tree_desc_s {int dummy;}; /* for buggy compilers */
     s->head[s->hash_size-1] = NIL; \
     zmemzero((Bytef *)s->head, (unsigned)(s->hash_size-1)*sizeof(*s->head));
 
+/* ===========================================================================
+ * Slide the hash table when sliding the window down (could be avoided with 32
+ * bit values at the expense of memory usage). We slide even when level == 0 to
+ * keep the hash table consistent if we switch back to level > 0 later.
+ */
+local void slide_hash(s)
+    deflate_state *s;
+{
+    unsigned n, m;
+    Posf *p;
+    uInt wsize = s->w_size;
+
+    n = s->hash_size;
+    p = &s->head[n];
+    do {
+        m = *--p;
+        *p = (Pos)(m >= wsize ? m - wsize : NIL);
+    } while (--n);
+    n = wsize;
+#ifndef FASTEST
+    p = &s->prev[n];
+    do {
+        m = *--p;
+        *p = (Pos)(m >= wsize ? m - wsize : NIL);
+        /* If n is not on any hash chain, prev[n] is garbage but
+         * its value will never be used.
+         */
+    } while (--n);
+#endif
+}
+
 /* ========================================================================= */
 int ZEXPORT deflateInit_(strm, level, version, stream_size)
     z_streamp strm;
@@ -221,6 +273,7 @@ int ZEXPORT deflateInit2_(strm, level, method, windowBits, memLevel, strategy,
     const char *version;
     int stream_size;
 {
+    unsigned window_padding = 8;
     deflate_state *s;
     int wrap = 1;
     static const char my_version[] = ZLIB_VERSION;
@@ -230,6 +283,8 @@ int ZEXPORT deflateInit2_(strm, level, method, windowBits, memLevel, strategy,
      * output size for (length,distance) codes is <= 24 bits.
      */
 
+    x86_check_features();
+
     if (version == Z_NULL || version[0] != my_version[0] ||
         stream_size != sizeof(z_stream)) {
         return Z_VERSION_ERROR;
@@ -270,7 +325,7 @@ int ZEXPORT deflateInit2_(strm, level, method, windowBits, memLevel, strategy,
 #endif
     if (memLevel < 1 || memLevel > MAX_MEM_LEVEL || method != Z_DEFLATED ||
         windowBits < 8 || windowBits > 15 || level < 0 || level > 9 ||
-        strategy < 0 || strategy > Z_FIXED) {
+        strategy < 0 || strategy > Z_FIXED || (windowBits == 8 && wrap != 1)) {
         return Z_STREAM_ERROR;
     }
     if (windowBits == 8) windowBits = 9;  /* until 256-byte window bug fixed */
@@ -278,19 +333,27 @@ int ZEXPORT deflateInit2_(strm, level, method, windowBits, memLevel, strategy,
     if (s == Z_NULL) return Z_MEM_ERROR;
     strm->state = (struct internal_state FAR *)s;
     s->strm = strm;
+    s->status = INIT_STATE;     /* to pass state test in deflateReset() */
 
     s->wrap = wrap;
     s->gzhead = Z_NULL;
-    s->w_bits = windowBits;
+    s->w_bits = (uInt)windowBits;
     s->w_size = 1 << s->w_bits;
     s->w_mask = s->w_size - 1;
 
-    s->hash_bits = memLevel + 7;
+    if (x86_cpu_enable_simd) {
+        s->hash_bits = 15;
+    } else {
+        s->hash_bits = memLevel + 7;
+    }
+
     s->hash_size = 1 << s->hash_bits;
     s->hash_mask = s->hash_size - 1;
     s->hash_shift =  ((s->hash_bits+MIN_MATCH-1)/MIN_MATCH);
 
-    s->window = (Bytef *) ZALLOC(strm, s->w_size, 2*sizeof(Byte));
+    s->window = (Bytef *) ZALLOC(strm,
+                                 s->w_size + window_padding,
+                                 2*sizeof(Byte));
     s->prev   = (Posf *)  ZALLOC(strm, s->w_size, sizeof(Pos));
     s->head   = (Posf *)  ZALLOC(strm, s->hash_size, sizeof(Pos));
 
@@ -319,6 +382,31 @@ int ZEXPORT deflateInit2_(strm, level, method, windowBits, memLevel, strategy,
     return deflateReset(strm);
 }
 
+/* =========================================================================
+ * Check for a valid deflate stream state. Return 0 if ok, 1 if not.
+ */
+local int deflateStateCheck (strm)
+    z_streamp strm;
+{
+    deflate_state *s;
+    if (strm == Z_NULL ||
+        strm->zalloc == (alloc_func)0 || strm->zfree == (free_func)0)
+        return 1;
+    s = strm->state;
+    if (s == Z_NULL || s->strm != strm || (s->status != INIT_STATE &&
+#ifdef GZIP
+                                           s->status != GZIP_STATE &&
+#endif
+                                           s->status != EXTRA_STATE &&
+                                           s->status != NAME_STATE &&
+                                           s->status != COMMENT_STATE &&
+                                           s->status != HCRC_STATE &&
+                                           s->status != BUSY_STATE &&
+                                           s->status != FINISH_STATE))
+        return 1;
+    return 0;
+}
+
 /* ========================================================================= */
 int ZEXPORT deflateSetDictionary (strm, dictionary, dictLength)
     z_streamp strm;
@@ -331,7 +419,7 @@ int ZEXPORT deflateSetDictionary (strm, dictionary, dictLength)
     unsigned avail;
     z_const unsigned char *next;
 
-    if (strm == Z_NULL || strm->state == Z_NULL || dictionary == Z_NULL)
+    if (deflateStateCheck(strm) || dictionary == Z_NULL)
         return Z_STREAM_ERROR;
     s = strm->state;
     wrap = s->wrap;
@@ -341,7 +429,7 @@ int ZEXPORT deflateSetDictionary (strm, dictionary, dictLength)
     /* when using zlib wrappers, compute Adler-32 for provided dictionary */
     if (wrap == 1)
         strm->adler = adler32(strm->adler, dictionary, dictLength);
-    s->wrap = 0;                    /* avoid computing Adler-32 in read_buf */
+    s->wrap = 0;                    /* avoid computing Adler-32 in deflate_read_buf */
 
     /* if dictionary would fill window, just replace the history */
     if (dictLength >= s->w_size) {
@@ -365,11 +453,7 @@ int ZEXPORT deflateSetDictionary (strm, dictionary, dictLength)
         str = s->strstart;
         n = s->lookahead - (MIN_MATCH-1);
         do {
-            UPDATE_HASH(s, s->ins_h, s->window[str + MIN_MATCH-1]);
-#ifndef FASTEST
-            s->prev[str & s->w_mask] = s->head[s->ins_h];
-#endif
-            s->head[s->ins_h] = (Pos)str;
+            insert_string(s, str);
             str++;
         } while (--n);
         s->strstart = str;
@@ -388,14 +472,35 @@ int ZEXPORT deflateSetDictionary (strm, dictionary, dictLength)
     return Z_OK;
 }
 
+/* ========================================================================= */
+int ZEXPORT deflateGetDictionary (strm, dictionary, dictLength)
+    z_streamp strm;
+    Bytef *dictionary;
+    uInt  *dictLength;
+{
+    deflate_state *s;
+    uInt len;
+
+    if (deflateStateCheck(strm))
+        return Z_STREAM_ERROR;
+    s = strm->state;
+    len = s->strstart + s->lookahead;
+    if (len > s->w_size)
+        len = s->w_size;
+    if (dictionary != Z_NULL && len)
+        zmemcpy(dictionary, s->window + s->strstart + s->lookahead - len, len);
+    if (dictLength != Z_NULL)
+        *dictLength = len;
+    return Z_OK;
+}
+
 /* ========================================================================= */
 int ZEXPORT deflateResetKeep (strm)
     z_streamp strm;
 {
     deflate_state *s;
 
-    if (strm == Z_NULL || strm->state == Z_NULL ||
-        strm->zalloc == (alloc_func)0 || strm->zfree == (free_func)0) {
+    if (deflateStateCheck(strm)) {
         return Z_STREAM_ERROR;
     }
 
@@ -410,7 +515,11 @@ int ZEXPORT deflateResetKeep (strm)
     if (s->wrap < 0) {
         s->wrap = -s->wrap; /* was made negative by deflate(..., Z_FINISH); */
     }
-    s->status = s->wrap ? INIT_STATE : BUSY_STATE;
+    s->status =
+#ifdef GZIP
+        s->wrap == 2 ? GZIP_STATE :
+#endif
+        s->wrap ? INIT_STATE : BUSY_STATE;
     strm->adler =
 #ifdef GZIP
         s->wrap == 2 ? crc32(0L, Z_NULL, 0) :
@@ -440,8 +549,8 @@ int ZEXPORT deflateSetHeader (strm, head)
     z_streamp strm;
     gz_headerp head;
 {
-    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
-    if (strm->state->wrap != 2) return Z_STREAM_ERROR;
+    if (deflateStateCheck(strm) || strm->state->wrap != 2)
+        return Z_STREAM_ERROR;
     strm->state->gzhead = head;
     return Z_OK;
 }
@@ -452,7 +561,7 @@ int ZEXPORT deflatePending (strm, pending, bits)
     int *bits;
     z_streamp strm;
 {
-    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+    if (deflateStateCheck(strm)) return Z_STREAM_ERROR;
     if (pending != Z_NULL)
         *pending = strm->state->pending;
     if (bits != Z_NULL)
@@ -469,7 +578,7 @@ int ZEXPORT deflatePrime (strm, bits, value)
     deflate_state *s;
     int put;
 
-    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+    if (deflateStateCheck(strm)) return Z_STREAM_ERROR;
     s = strm->state;
     if ((Bytef *)(s->d_buf) < s->pending_out + ((Buf_size + 7) >> 3))
         return Z_BUF_ERROR;
@@ -494,9 +603,8 @@ int ZEXPORT deflateParams(strm, level, strategy)
 {
     deflate_state *s;
     compress_func func;
-    int err = Z_OK;
 
-    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+    if (deflateStateCheck(strm)) return Z_STREAM_ERROR;
     s = strm->state;
 
 #ifdef FASTEST
@@ -510,13 +618,22 @@ int ZEXPORT deflateParams(strm, level, strategy)
     func = configuration_table[s->level].func;
 
     if ((strategy != s->strategy || func != configuration_table[level].func) &&
-        strm->total_in != 0) {
+        s->high_water) {
         /* Flush the last buffer: */
-        err = deflate(strm, Z_BLOCK);
-        if (err == Z_BUF_ERROR && s->pending == 0)
-            err = Z_OK;
+        int err = deflate(strm, Z_BLOCK);
+        if (err == Z_STREAM_ERROR)
+            return err;
+        if (strm->avail_out == 0)
+            return Z_BUF_ERROR;
     }
     if (s->level != level) {
+        if (s->level == 0 && s->matches != 0) {
+            if (s->matches == 1)
+                slide_hash(s);
+            else
+                CLEAR_HASH(s);
+            s->matches = 0;
+        }
         s->level = level;
         s->max_lazy_match   = configuration_table[level].max_lazy;
         s->good_match       = configuration_table[level].good_length;
@@ -524,7 +641,7 @@ int ZEXPORT deflateParams(strm, level, strategy)
         s->max_chain_length = configuration_table[level].max_chain;
     }
     s->strategy = strategy;
-    return err;
+    return Z_OK;
 }
 
 /* ========================================================================= */
@@ -537,12 +654,12 @@ int ZEXPORT deflateTune(strm, good_length, max_lazy, nice_length, max_chain)
 {
     deflate_state *s;
 
-    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+    if (deflateStateCheck(strm)) return Z_STREAM_ERROR;
     s = strm->state;
-    s->good_match = good_length;
-    s->max_lazy_match = max_lazy;
+    s->good_match = (uInt)good_length;
+    s->max_lazy_match = (uInt)max_lazy;
     s->nice_match = nice_length;
-    s->max_chain_length = max_chain;
+    s->max_chain_length = (uInt)max_chain;
     return Z_OK;
 }
 
@@ -569,14 +686,13 @@ uLong ZEXPORT deflateBound(strm, sourceLen)
 {
     deflate_state *s;
     uLong complen, wraplen;
-    Bytef *str;
 
     /* conservative upper bound for compressed data */
     complen = sourceLen +
               ((sourceLen + 7) >> 3) + ((sourceLen + 63) >> 6) + 5;
 
     /* if can't get parameters, return conservative bound plus zlib wrapper */
-    if (strm == Z_NULL || strm->state == Z_NULL)
+    if (deflateStateCheck(strm))
         return complen + 6;
 
     /* compute wrapper length */
@@ -588,9 +704,11 @@ uLong ZEXPORT deflateBound(strm, sourceLen)
     case 1:                                 /* zlib wrapper */
         wraplen = 6 + (s->strstart ? 4 : 0);
         break;
+#ifdef GZIP
     case 2:                                 /* gzip wrapper */
         wraplen = 18;
         if (s->gzhead != Z_NULL) {          /* user-supplied gzip header */
+            Bytef *str;
             if (s->gzhead->extra != Z_NULL)
                 wraplen += 2 + s->gzhead->extra_len;
             str = s->gzhead->name;
@@ -607,6 +725,7 @@ uLong ZEXPORT deflateBound(strm, sourceLen)
                 wraplen += 2;
         }
         break;
+#endif
     default:                                /* for compiler happiness */
         wraplen = 6;
     }
@@ -634,10 +753,10 @@ local void putShortMSB (s, b)
 }
 
 /* =========================================================================
- * Flush as much pending output as possible. All deflate() output goes
- * through this function so some applications may wish to modify it
- * to avoid allocating a large strm->next_out buffer and copying into it.
- * (See also read_buf()).
+ * Flush as much pending output as possible. All deflate() output, except for
+ * some deflate_stored() output, goes through this function so some
+ * applications may wish to modify it to avoid allocating a large
+ * strm->next_out buffer and copying into it. (See also deflate_read_buf()).
  */
 local void flush_pending(strm)
     z_streamp strm;
@@ -654,13 +773,23 @@ local void flush_pending(strm)
     strm->next_out  += len;
     s->pending_out  += len;
     strm->total_out += len;
-    strm->avail_out  -= len;
-    s->pending -= len;
+    strm->avail_out -= len;
+    s->pending      -= len;
     if (s->pending == 0) {
         s->pending_out = s->pending_buf;
     }
 }
 
+/* ===========================================================================
+ * Update the header CRC with the bytes s->pending_buf[beg..s->pending - 1].
+ */
+#define HCRC_UPDATE(beg) \
+    do { \
+        if (s->gzhead->hcrc && s->pending > (beg)) \
+            strm->adler = crc32(strm->adler, s->pending_buf + (beg), \
+                                s->pending - (beg)); \
+    } while (0)
+
 /* ========================================================================= */
 int ZEXPORT deflate (strm, flush)
     z_streamp strm;
@@ -669,230 +798,229 @@ int ZEXPORT deflate (strm, flush)
     int old_flush; /* value of flush param for previous deflate call */
     deflate_state *s;
 
-    if (strm == Z_NULL || strm->state == Z_NULL ||
-        flush > Z_BLOCK || flush < 0) {
+    if (deflateStateCheck(strm) || flush > Z_BLOCK || flush < 0) {
         return Z_STREAM_ERROR;
     }
     s = strm->state;
 
     if (strm->next_out == Z_NULL ||
-        (strm->next_in == Z_NULL && strm->avail_in != 0) ||
+        (strm->avail_in != 0 && strm->next_in == Z_NULL) ||
         (s->status == FINISH_STATE && flush != Z_FINISH)) {
         ERR_RETURN(strm, Z_STREAM_ERROR);
     }
     if (strm->avail_out == 0) ERR_RETURN(strm, Z_BUF_ERROR);
 
-    s->strm = strm; /* just in case */
     old_flush = s->last_flush;
     s->last_flush = flush;
 
+    /* Flush as much pending output as possible */
+    if (s->pending != 0) {
+        flush_pending(strm);
+        if (strm->avail_out == 0) {
+            /* Since avail_out is 0, deflate will be called again with
+             * more output space, but possibly with both pending and
+             * avail_in equal to zero. There won't be anything to do,
+             * but this is not an error situation so make sure we
+             * return OK instead of BUF_ERROR at next call of deflate:
+             */
+            s->last_flush = -1;
+            return Z_OK;
+        }
+
+    /* Make sure there is something to do and avoid duplicate consecutive
+     * flushes. For repeated and useless calls with Z_FINISH, we keep
+     * returning Z_STREAM_END instead of Z_BUF_ERROR.
+     */
+    } else if (strm->avail_in == 0 && RANK(flush) <= RANK(old_flush) &&
+               flush != Z_FINISH) {
+        ERR_RETURN(strm, Z_BUF_ERROR);
+    }
+
+    /* User must not provide more input after the first FINISH: */
+    if (s->status == FINISH_STATE && strm->avail_in != 0) {
+        ERR_RETURN(strm, Z_BUF_ERROR);
+    }
+
     /* Write the header */
     if (s->status == INIT_STATE) {
-#ifdef GZIP
-        if (s->wrap == 2) {
-            strm->adler = crc32(0L, Z_NULL, 0);
-            put_byte(s, 31);
-            put_byte(s, 139);
-            put_byte(s, 8);
-            if (s->gzhead == Z_NULL) {
-                put_byte(s, 0);
-                put_byte(s, 0);
-                put_byte(s, 0);
-                put_byte(s, 0);
-                put_byte(s, 0);
-                put_byte(s, s->level == 9 ? 2 :
-                            (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2 ?
-                             4 : 0));
-                put_byte(s, OS_CODE);
-                s->status = BUSY_STATE;
-            }
-            else {
-                put_byte(s, (s->gzhead->text ? 1 : 0) +
-                            (s->gzhead->hcrc ? 2 : 0) +
-                            (s->gzhead->extra == Z_NULL ? 0 : 4) +
-                            (s->gzhead->name == Z_NULL ? 0 : 8) +
-                            (s->gzhead->comment == Z_NULL ? 0 : 16)
-                        );
-                put_byte(s, (Byte)(s->gzhead->time & 0xff));
-                put_byte(s, (Byte)((s->gzhead->time >> 8) & 0xff));
-                put_byte(s, (Byte)((s->gzhead->time >> 16) & 0xff));
-                put_byte(s, (Byte)((s->gzhead->time >> 24) & 0xff));
-                put_byte(s, s->level == 9 ? 2 :
-                            (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2 ?
-                             4 : 0));
-                put_byte(s, s->gzhead->os & 0xff);
-                if (s->gzhead->extra != Z_NULL) {
-                    put_byte(s, s->gzhead->extra_len & 0xff);
-                    put_byte(s, (s->gzhead->extra_len >> 8) & 0xff);
-                }
-                if (s->gzhead->hcrc)
-                    strm->adler = crc32(strm->adler, s->pending_buf,
-                                        s->pending);
-                s->gzindex = 0;
-                s->status = EXTRA_STATE;
-            }
-        }
+        /* zlib header */
+        uInt header = (Z_DEFLATED + ((s->w_bits-8)<<4)) << 8;
+        uInt level_flags;
+
+        if (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2)
+            level_flags = 0;
+        else if (s->level < 6)
+            level_flags = 1;
+        else if (s->level == 6)
+            level_flags = 2;
         else
-#endif
-        {
-            uInt header = (Z_DEFLATED + ((s->w_bits-8)<<4)) << 8;
-            uInt level_flags;
-
-            if (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2)
-                level_flags = 0;
-            else if (s->level < 6)
-                level_flags = 1;
-            else if (s->level == 6)
-                level_flags = 2;
-            else
-                level_flags = 3;
-            header |= (level_flags << 6);
-            if (s->strstart != 0) header |= PRESET_DICT;
-            header += 31 - (header % 31);
+            level_flags = 3;
+        header |= (level_flags << 6);
+        if (s->strstart != 0) header |= PRESET_DICT;
+        header += 31 - (header % 31);
 
+        putShortMSB(s, header);
+
+        /* Save the adler32 of the preset dictionary: */
+        if (s->strstart != 0) {
+            putShortMSB(s, (uInt)(strm->adler >> 16));
+            putShortMSB(s, (uInt)(strm->adler & 0xffff));
+        }
+        strm->adler = adler32(0L, Z_NULL, 0);
+        s->status = BUSY_STATE;
+
+        /* Compression must start with an empty pending buffer */
+        flush_pending(strm);
+        if (s->pending != 0) {
+            s->last_flush = -1;
+            return Z_OK;
+        }
+    }
+#ifdef GZIP
+    if (s->status == GZIP_STATE) {
+        /* gzip header */
+        crc_reset(s);
+        put_byte(s, 31);
+        put_byte(s, 139);
+        put_byte(s, 8);
+        if (s->gzhead == Z_NULL) {
+            put_byte(s, 0);
+            put_byte(s, 0);
+            put_byte(s, 0);
+            put_byte(s, 0);
+            put_byte(s, 0);
+            put_byte(s, s->level == 9 ? 2 :
+                     (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2 ?
+                      4 : 0));
+            put_byte(s, OS_CODE);
             s->status = BUSY_STATE;
-            putShortMSB(s, header);
 
-            /* Save the adler32 of the preset dictionary: */
-            if (s->strstart != 0) {
-                putShortMSB(s, (uInt)(strm->adler >> 16));
-                putShortMSB(s, (uInt)(strm->adler & 0xffff));
+            /* Compression must start with an empty pending buffer */
+            flush_pending(strm);
+            if (s->pending != 0) {
+                s->last_flush = -1;
+                return Z_OK;
+            }
+        }
+        else {
+            put_byte(s, (s->gzhead->text ? 1 : 0) +
+                     (s->gzhead->hcrc ? 2 : 0) +
+                     (s->gzhead->extra == Z_NULL ? 0 : 4) +
+                     (s->gzhead->name == Z_NULL ? 0 : 8) +
+                     (s->gzhead->comment == Z_NULL ? 0 : 16)
+                     );
+            put_byte(s, (Byte)(s->gzhead->time & 0xff));
+            put_byte(s, (Byte)((s->gzhead->time >> 8) & 0xff));
+            put_byte(s, (Byte)((s->gzhead->time >> 16) & 0xff));
+            put_byte(s, (Byte)((s->gzhead->time >> 24) & 0xff));
+            put_byte(s, s->level == 9 ? 2 :
+                     (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2 ?
+                      4 : 0));
+            put_byte(s, s->gzhead->os & 0xff);
+            if (s->gzhead->extra != Z_NULL) {
+                put_byte(s, s->gzhead->extra_len & 0xff);
+                put_byte(s, (s->gzhead->extra_len >> 8) & 0xff);
             }
-            strm->adler = adler32(0L, Z_NULL, 0);
+            if (s->gzhead->hcrc)
+                strm->adler = crc32(strm->adler, s->pending_buf,
+                                    s->pending);
+            s->gzindex = 0;
+            s->status = EXTRA_STATE;
         }
     }
-#ifdef GZIP
     if (s->status == EXTRA_STATE) {
         if (s->gzhead->extra != Z_NULL) {
-            uInt beg = s->pending;  /* start of bytes to update crc */
-
-            while (s->gzindex < (s->gzhead->extra_len & 0xffff)) {
-                if (s->pending == s->pending_buf_size) {
-                    if (s->gzhead->hcrc && s->pending > beg)
-                        strm->adler = crc32(strm->adler, s->pending_buf + beg,
-                                            s->pending - beg);
-                    flush_pending(strm);
-                    beg = s->pending;
-                    if (s->pending == s->pending_buf_size)
-                        break;
+            ulg beg = s->pending;   /* start of bytes to update crc */
+            uInt left = (s->gzhead->extra_len & 0xffff) - s->gzindex;
+            while (s->pending + left > s->pending_buf_size) {
+                uInt copy = s->pending_buf_size - s->pending;
+                zmemcpy(s->pending_buf + s->pending,
+                        s->gzhead->extra + s->gzindex, copy);
+                s->pending = s->pending_buf_size;
+                HCRC_UPDATE(beg);
+                s->gzindex += copy;
+                flush_pending(strm);
+                if (s->pending != 0) {
+                    s->last_flush = -1;
+                    return Z_OK;
                 }
-                put_byte(s, s->gzhead->extra[s->gzindex]);
-                s->gzindex++;
-            }
-            if (s->gzhead->hcrc && s->pending > beg)
-                strm->adler = crc32(strm->adler, s->pending_buf + beg,
-                                    s->pending - beg);
-            if (s->gzindex == s->gzhead->extra_len) {
-                s->gzindex = 0;
-                s->status = NAME_STATE;
+                beg = 0;
+                left -= copy;
             }
+            zmemcpy(s->pending_buf + s->pending,
+                    s->gzhead->extra + s->gzindex, left);
+            s->pending += left;
+            HCRC_UPDATE(beg);
+            s->gzindex = 0;
         }
-        else
-            s->status = NAME_STATE;
+        s->status = NAME_STATE;
     }
     if (s->status == NAME_STATE) {
         if (s->gzhead->name != Z_NULL) {
-            uInt beg = s->pending;  /* start of bytes to update crc */
+            ulg beg = s->pending;   /* start of bytes to update crc */
             int val;
-
             do {
                 if (s->pending == s->pending_buf_size) {
-                    if (s->gzhead->hcrc && s->pending > beg)
-                        strm->adler = crc32(strm->adler, s->pending_buf + beg,
-                                            s->pending - beg);
+                    HCRC_UPDATE(beg);
                     flush_pending(strm);
-                    beg = s->pending;
-                    if (s->pending == s->pending_buf_size) {
-                        val = 1;
-                        break;
+                    if (s->pending != 0) {
+                        s->last_flush = -1;
+                        return Z_OK;
                     }
+                    beg = 0;
                 }
                 val = s->gzhead->name[s->gzindex++];
                 put_byte(s, val);
             } while (val != 0);
-            if (s->gzhead->hcrc && s->pending > beg)
-                strm->adler = crc32(strm->adler, s->pending_buf + beg,
-                                    s->pending - beg);
-            if (val == 0) {
-                s->gzindex = 0;
-                s->status = COMMENT_STATE;
-            }
+            HCRC_UPDATE(beg);
+            s->gzindex = 0;
         }
-        else
-            s->status = COMMENT_STATE;
+        s->status = COMMENT_STATE;
     }
     if (s->status == COMMENT_STATE) {
         if (s->gzhead->comment != Z_NULL) {
-            uInt beg = s->pending;  /* start of bytes to update crc */
+            ulg beg = s->pending;   /* start of bytes to update crc */
             int val;
-
             do {
                 if (s->pending == s->pending_buf_size) {
-                    if (s->gzhead->hcrc && s->pending > beg)
-                        strm->adler = crc32(strm->adler, s->pending_buf + beg,
-                                            s->pending - beg);
+                    HCRC_UPDATE(beg);
                     flush_pending(strm);
-                    beg = s->pending;
-                    if (s->pending == s->pending_buf_size) {
-                        val = 1;
-                        break;
+                    if (s->pending != 0) {
+                        s->last_flush = -1;
+                        return Z_OK;
                     }
+                    beg = 0;
                 }
                 val = s->gzhead->comment[s->gzindex++];
                 put_byte(s, val);
             } while (val != 0);
-            if (s->gzhead->hcrc && s->pending > beg)
-                strm->adler = crc32(strm->adler, s->pending_buf + beg,
-                                    s->pending - beg);
-            if (val == 0)
-                s->status = HCRC_STATE;
+            HCRC_UPDATE(beg);
         }
-        else
-            s->status = HCRC_STATE;
+        s->status = HCRC_STATE;
     }
     if (s->status == HCRC_STATE) {
         if (s->gzhead->hcrc) {
-            if (s->pending + 2 > s->pending_buf_size)
+            if (s->pending + 2 > s->pending_buf_size) {
                 flush_pending(strm);
-            if (s->pending + 2 <= s->pending_buf_size) {
-                put_byte(s, (Byte)(strm->adler & 0xff));
-                put_byte(s, (Byte)((strm->adler >> 8) & 0xff));
-                strm->adler = crc32(0L, Z_NULL, 0);
-                s->status = BUSY_STATE;
+                if (s->pending != 0) {
+                    s->last_flush = -1;
+                    return Z_OK;
+                }
             }
+            put_byte(s, (Byte)(strm->adler & 0xff));
+            put_byte(s, (Byte)((strm->adler >> 8) & 0xff));
+            strm->adler = crc32(0L, Z_NULL, 0);
         }
-        else
-            s->status = BUSY_STATE;
-    }
-#endif
+        s->status = BUSY_STATE;
 
-    /* Flush as much pending output as possible */
-    if (s->pending != 0) {
+        /* Compression must start with an empty pending buffer */
         flush_pending(strm);
-        if (strm->avail_out == 0) {
-            /* Since avail_out is 0, deflate will be called again with
-             * more output space, but possibly with both pending and
-             * avail_in equal to zero. There won't be anything to do,
-             * but this is not an error situation so make sure we
-             * return OK instead of BUF_ERROR at next call of deflate:
-             */
+        if (s->pending != 0) {
             s->last_flush = -1;
             return Z_OK;
         }
-
-    /* Make sure there is something to do and avoid duplicate consecutive
-     * flushes. For repeated and useless calls with Z_FINISH, we keep
-     * returning Z_STREAM_END instead of Z_BUF_ERROR.
-     */
-    } else if (strm->avail_in == 0 && RANK(flush) <= RANK(old_flush) &&
-               flush != Z_FINISH) {
-        ERR_RETURN(strm, Z_BUF_ERROR);
-    }
-
-    /* User must not provide more input after the first FINISH: */
-    if (s->status == FINISH_STATE && strm->avail_in != 0) {
-        ERR_RETURN(strm, Z_BUF_ERROR);
     }
+#endif
 
     /* Start a new block or continue the current one.
      */
@@ -900,9 +1028,10 @@ int ZEXPORT deflate (strm, flush)
         (flush != Z_NO_FLUSH && s->status != FINISH_STATE)) {
         block_state bstate;
 
-        bstate = s->strategy == Z_HUFFMAN_ONLY ? deflate_huff(s, flush) :
-                    (s->strategy == Z_RLE ? deflate_rle(s, flush) :
-                        (*(configuration_table[s->level].func))(s, flush));
+        bstate = s->level == 0 ? deflate_stored(s, flush) :
+                 s->strategy == Z_HUFFMAN_ONLY ? deflate_huff(s, flush) :
+                 s->strategy == Z_RLE ? deflate_rle(s, flush) :
+                 (*(configuration_table[s->level].func))(s, flush);
 
         if (bstate == finish_started || bstate == finish_done) {
             s->status = FINISH_STATE;
@@ -944,7 +1073,6 @@ int ZEXPORT deflate (strm, flush)
             }
         }
     }
-    Assert(strm->avail_out > 0, "bug2");
 
     if (flush != Z_FINISH) return Z_OK;
     if (s->wrap <= 0) return Z_STREAM_END;
@@ -952,6 +1080,7 @@ int ZEXPORT deflate (strm, flush)
     /* Write the trailer */
 #ifdef GZIP
     if (s->wrap == 2) {
+        crc_finalize(s);
         put_byte(s, (Byte)(strm->adler & 0xff));
         put_byte(s, (Byte)((strm->adler >> 8) & 0xff));
         put_byte(s, (Byte)((strm->adler >> 16) & 0xff));
@@ -981,18 +1110,9 @@ int ZEXPORT deflateEnd (strm)
 {
     int status;
 
-    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+    if (deflateStateCheck(strm)) return Z_STREAM_ERROR;
 
     status = strm->state->status;
-    if (status != INIT_STATE &&
-        status != EXTRA_STATE &&
-        status != NAME_STATE &&
-        status != COMMENT_STATE &&
-        status != HCRC_STATE &&
-        status != BUSY_STATE &&
-        status != FINISH_STATE) {
-      return Z_STREAM_ERROR;
-    }
 
     /* Deallocate in reverse order of allocations: */
     TRY_FREE(strm, strm->state->pending_buf);
@@ -1023,7 +1143,7 @@ int ZEXPORT deflateCopy (dest, source)
     ushf *overlay;
 
 
-    if (source == Z_NULL || dest == Z_NULL || source->state == Z_NULL) {
+    if (deflateStateCheck(source) || dest == Z_NULL) {
         return Z_STREAM_ERROR;
     }
 
@@ -1073,7 +1193,7 @@ int ZEXPORT deflateCopy (dest, source)
  * allocating a large strm->next_in buffer and copying from it.
  * (See also flush_pending()).
  */
-local int read_buf(strm, buf, size)
+ZLIB_INTERNAL unsigned deflate_read_buf(strm, buf, size)
     z_streamp strm;
     Bytef *buf;
     unsigned size;
@@ -1085,19 +1205,20 @@ local int read_buf(strm, buf, size)
 
     strm->avail_in  -= len;
 
-    zmemcpy(buf, strm->next_in, len);
-    if (strm->state->wrap == 1) {
-        strm->adler = adler32(strm->adler, buf, len);
-    }
 #ifdef GZIP
-    else if (strm->state->wrap == 2) {
-        strm->adler = crc32(strm->adler, buf, len);
-    }
+    if (strm->state->wrap == 2)
+        copy_with_crc(strm, buf, len);
+    else 
 #endif
+    {
+        zmemcpy(buf, strm->next_in, len);
+        if (strm->state->wrap == 1)
+            strm->adler = adler32(strm->adler, buf, len);
+    }
     strm->next_in  += len;
     strm->total_in += len;
 
-    return (int)len;
+    return len;
 }
 
 /* ===========================================================================
@@ -1151,9 +1272,9 @@ local uInt longest_match(s, cur_match)
 {
     unsigned chain_length = s->max_chain_length;/* max hash chain length */
     register Bytef *scan = s->window + s->strstart; /* current string */
-    register Bytef *match;                       /* matched string */
+    register Bytef *match;                      /* matched string */
     register int len;                           /* length of current match */
-    int best_len = s->prev_length;              /* best match length so far */
+    int best_len = (int)s->prev_length;         /* best match length so far */
     int nice_match = s->nice_match;             /* stop if match long enough */
     IPos limit = s->strstart > (IPos)MAX_DIST(s) ?
         s->strstart - (IPos)MAX_DIST(s) : NIL;
@@ -1188,7 +1309,7 @@ local uInt longest_match(s, cur_match)
     /* Do not look for matches beyond the end of the input. This is necessary
      * to make deflate deterministic.
      */
-    if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;
+    if ((uInt)nice_match > s->lookahead) nice_match = (int)s->lookahead;
 
     Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead");
 
@@ -1349,7 +1470,11 @@ local uInt longest_match(s, cur_match)
 
 #endif /* FASTEST */
 
-#ifdef DEBUG
+#ifdef ZLIB_DEBUG
+
+#define EQUAL 0
+/* result of memcmp for equal strings */
+
 /* ===========================================================================
  * Check that the match at match_start is indeed a match.
  */
@@ -1375,7 +1500,7 @@ local void check_match(s, start, match, length)
 }
 #else
 #  define check_match(s, start, match, length)
-#endif /* DEBUG */
+#endif /* ZLIB_DEBUG */
 
 /* ===========================================================================
  * Fill the window when the lookahead becomes insufficient.
@@ -1387,11 +1512,22 @@ local void check_match(s, start, match, length)
  *    performed for at least two bytes (required for the zip translate_eol
  *    option -- not supported here).
  */
-local void fill_window(s)
+local void fill_window_c(deflate_state *s);
+
+local void fill_window(deflate_state *s)
+{
+    if (x86_cpu_enable_simd) {
+        fill_window_sse(s);
+        return;
+    }
+
+    fill_window_c(s);
+}
+
+local void fill_window_c(s)
     deflate_state *s;
 {
-    register unsigned n, m;
-    register Posf *p;
+    unsigned n;
     unsigned more;    /* Amount of free space at the end of the window. */
     uInt wsize = s->w_size;
 
@@ -1418,35 +1554,11 @@ local void fill_window(s)
          */
         if (s->strstart >= wsize+MAX_DIST(s)) {
 
-            zmemcpy(s->window, s->window+wsize, (unsigned)wsize);
+            zmemcpy(s->window, s->window+wsize, (unsigned)wsize - more);
             s->match_start -= wsize;
             s->strstart    -= wsize; /* we now have strstart >= MAX_DIST */
             s->block_start -= (long) wsize;
-
-            /* Slide the hash table (could be avoided with 32 bit values
-               at the expense of memory usage). We slide even when level == 0
-               to keep the hash table consistent if we switch back to level > 0
-               later. (Using level 0 permanently is not an optimal usage of
-               zlib, so we don't care about this pathological case.)
-             */
-            n = s->hash_size;
-            p = &s->head[n];
-            do {
-                m = *--p;
-                *p = (Pos)(m >= wsize ? m-wsize : NIL);
-            } while (--n);
-
-            n = wsize;
-#ifndef FASTEST
-            p = &s->prev[n];
-            do {
-                m = *--p;
-                *p = (Pos)(m >= wsize ? m-wsize : NIL);
-                /* If n is not on any hash chain, prev[n] is garbage but
-                 * its value will never be used.
-                 */
-            } while (--n);
-#endif
+            slide_hash(s);
             more += wsize;
         }
         if (s->strm->avail_in == 0) break;
@@ -1464,7 +1576,7 @@ local void fill_window(s)
          */
         Assert(more >= 2, "more < 2");
 
-        n = read_buf(s->strm, s->window + s->strstart + s->lookahead, more);
+        n = deflate_read_buf(s->strm, s->window + s->strstart + s->lookahead, more);
         s->lookahead += n;
 
         /* Initialize the hash value now that we have some input: */
@@ -1552,70 +1664,199 @@ local void fill_window(s)
    if (s->strm->avail_out == 0) return (last) ? finish_started : need_more; \
 }
 
+/* Maximum stored block length in deflate format (not including header). */
+#define MAX_STORED 65535
+
+/* Minimum of a and b. */
+#define MIN(a, b) ((a) > (b) ? (b) : (a))
+
 /* ===========================================================================
  * Copy without compression as much as possible from the input stream, return
  * the current block state.
- * This function does not insert new strings in the dictionary since
- * uncompressible data is probably not useful. This function is used
- * only for the level=0 compression option.
- * NOTE: this function should be optimized to avoid extra copying from
- * window to pending_buf.
+ *
+ * In case deflateParams() is used to later switch to a non-zero compression
+ * level, s->matches (otherwise unused when storing) keeps track of the number
+ * of hash table slides to perform. If s->matches is 1, then one hash table
+ * slide will be done when switching. If s->matches is 2, the maximum value
+ * allowed here, then the hash table will be cleared, since two or more slides
+ * is the same as a clear.
+ *
+ * deflate_stored() is written to minimize the number of times an input byte is
+ * copied. It is most efficient with large input and output buffers, which
+ * maximizes the opportunites to have a single copy from next_in to next_out.
  */
 local block_state deflate_stored(s, flush)
     deflate_state *s;
     int flush;
 {
-    /* Stored blocks are limited to 0xffff bytes, pending_buf is limited
-     * to pending_buf_size, and each stored block has a 5 byte header:
+    /* Smallest worthy block size when not flushing or finishing. By default
+     * this is 32K. This can be as small as 507 bytes for memLevel == 1. For
+     * large input and output buffers, the stored block size will be larger.
      */
-    ulg max_block_size = 0xffff;
-    ulg max_start;
-
-    if (max_block_size > s->pending_buf_size - 5) {
-        max_block_size = s->pending_buf_size - 5;
-    }
-
-    /* Copy as much as possible from input to output: */
-    for (;;) {
-        /* Fill the window as much as possible: */
-        if (s->lookahead <= 1) {
+    unsigned min_block = MIN(s->pending_buf_size - 5, s->w_size);
 
-            Assert(s->strstart < s->w_size+MAX_DIST(s) ||
-                   s->block_start >= (long)s->w_size, "slide too late");
+    /* Copy as many min_block or larger stored blocks directly to next_out as
+     * possible. If flushing, copy the remaining available input to next_out as
+     * stored blocks, if there is enough space.
+     */
+    unsigned len, left, have, last = 0;
+    unsigned used = s->strm->avail_in;
+    do {
+        /* Set len to the maximum size block that we can copy directly with the
+         * available input data and output space. Set left to how much of that
+         * would be copied from what's left in the window.
+         */
+        len = MAX_STORED;       /* maximum deflate stored block length */
+        have = (s->bi_valid + 42) >> 3;         /* number of header bytes */
+        if (s->strm->avail_out < have)          /* need room for header */
+            break;
+            /* maximum stored block length that will fit in avail_out: */
+        have = s->strm->avail_out - have;
+        left = s->strstart - s->block_start;    /* bytes left in window */
+        if (len > (ulg)left + s->strm->avail_in)
+            len = left + s->strm->avail_in;     /* limit len to the input */
+        if (len > have)
+            len = have;                         /* limit len to the output */
+
+        /* If the stored block would be less than min_block in length, or if
+         * unable to copy all of the available input when flushing, then try
+         * copying to the window and the pending buffer instead. Also don't
+         * write an empty block when flushing -- deflate() does that.
+         */
+        if (len < min_block && ((len == 0 && flush != Z_FINISH) ||
+                                flush == Z_NO_FLUSH ||
+                                len != left + s->strm->avail_in))
+            break;
 
-            fill_window(s);
-            if (s->lookahead == 0 && flush == Z_NO_FLUSH) return need_more;
+        /* Make a dummy stored block in pending to get the header bytes,
+         * including any pending bits. This also updates the debugging counts.
+         */
+        last = flush == Z_FINISH && len == left + s->strm->avail_in ? 1 : 0;
+        _tr_stored_block(s, (char *)0, 0L, last);
+
+        /* Replace the lengths in the dummy stored block with len. */
+        s->pending_buf[s->pending - 4] = len;
+        s->pending_buf[s->pending - 3] = len >> 8;
+        s->pending_buf[s->pending - 2] = ~len;
+        s->pending_buf[s->pending - 1] = ~len >> 8;
+
+        /* Write the stored block header bytes. */
+        flush_pending(s->strm);
+
+#ifdef ZLIB_DEBUG
+        /* Update debugging counts for the data about to be copied. */
+        s->compressed_len += len << 3;
+        s->bits_sent += len << 3;
+#endif
 
-            if (s->lookahead == 0) break; /* flush the current block */
+        /* Copy uncompressed bytes from the window to next_out. */
+        if (left) {
+            if (left > len)
+                left = len;
+            zmemcpy(s->strm->next_out, s->window + s->block_start, left);
+            s->strm->next_out += left;
+            s->strm->avail_out -= left;
+            s->strm->total_out += left;
+            s->block_start += left;
+            len -= left;
         }
-        Assert(s->block_start >= 0L, "block gone");
-
-        s->strstart += s->lookahead;
-        s->lookahead = 0;
-
-        /* Emit a stored block if pending_buf will be full: */
-        max_start = s->block_start + max_block_size;
-        if (s->strstart == 0 || (ulg)s->strstart >= max_start) {
-            /* strstart == 0 is possible when wraparound on 16-bit machine */
-            s->lookahead = (uInt)(s->strstart - max_start);
-            s->strstart = (uInt)max_start;
-            FLUSH_BLOCK(s, 0);
+
+        /* Copy uncompressed bytes directly from next_in to next_out, updating
+         * the check value.
+         */
+        if (len) {
+            deflate_read_buf(s->strm, s->strm->next_out, len);
+            s->strm->next_out += len;
+            s->strm->avail_out -= len;
+            s->strm->total_out += len;
         }
-        /* Flush if we may have to slide, otherwise block_start may become
-         * negative and the data will be gone:
+    } while (last == 0);
+
+    /* Update the sliding window with the last s->w_size bytes of the copied
+     * data, or append all of the copied data to the existing window if less
+     * than s->w_size bytes were copied. Also update the number of bytes to
+     * insert in the hash tables, in the event that deflateParams() switches to
+     * a non-zero compression level.
+     */
+    used -= s->strm->avail_in;      /* number of input bytes directly copied */
+    if (used) {
+        /* If any input was used, then no unused input remains in the window,
+         * therefore s->block_start == s->strstart.
          */
-        if (s->strstart - (uInt)s->block_start >= MAX_DIST(s)) {
-            FLUSH_BLOCK(s, 0);
+        if (used >= s->w_size) {    /* supplant the previous history */
+            s->matches = 2;         /* clear hash */
+            zmemcpy(s->window, s->strm->next_in - s->w_size, s->w_size);
+            s->strstart = s->w_size;
+        }
+        else {
+            if (s->window_size - s->strstart <= used) {
+                /* Slide the window down. */
+                s->strstart -= s->w_size;
+                zmemcpy(s->window, s->window + s->w_size, s->strstart);
+                if (s->matches < 2)
+                    s->matches++;   /* add a pending slide_hash() */
+            }
+            zmemcpy(s->window + s->strstart, s->strm->next_in - used, used);
+            s->strstart += used;
         }
+        s->block_start = s->strstart;
+        s->insert += MIN(used, s->w_size - s->insert);
     }
-    s->insert = 0;
-    if (flush == Z_FINISH) {
-        FLUSH_BLOCK(s, 1);
+    if (s->high_water < s->strstart)
+        s->high_water = s->strstart;
+
+    /* If the last block was written to next_out, then done. */
+    if (last)
         return finish_done;
+
+    /* If flushing and all input has been consumed, then done. */
+    if (flush != Z_NO_FLUSH && flush != Z_FINISH &&
+        s->strm->avail_in == 0 && (long)s->strstart == s->block_start)
+        return block_done;
+
+    /* Fill the window with any remaining input. */
+    have = s->window_size - s->strstart - 1;
+    if (s->strm->avail_in > have && s->block_start >= (long)s->w_size) {
+        /* Slide the window down. */
+        s->block_start -= s->w_size;
+        s->strstart -= s->w_size;
+        zmemcpy(s->window, s->window + s->w_size, s->strstart);
+        if (s->matches < 2)
+            s->matches++;           /* add a pending slide_hash() */
+        have += s->w_size;          /* more space now */
     }
-    if ((long)s->strstart > s->block_start)
-        FLUSH_BLOCK(s, 0);
-    return block_done;
+    if (have > s->strm->avail_in)
+        have = s->strm->avail_in;
+    if (have) {
+        deflate_read_buf(s->strm, s->window + s->strstart, have);
+        s->strstart += have;
+    }
+    if (s->high_water < s->strstart)
+        s->high_water = s->strstart;
+
+    /* There was not enough avail_out to write a complete worthy or flushed
+     * stored block to next_out. Write a stored block to pending instead, if we
+     * have enough input for a worthy block, or if flushing and there is enough
+     * room for the remaining input as a stored block in the pending buffer.
+     */
+    have = (s->bi_valid + 42) >> 3;         /* number of header bytes */
+        /* maximum stored block length that will fit in pending: */
+    have = MIN(s->pending_buf_size - have, MAX_STORED);
+    min_block = MIN(have, s->w_size);
+    left = s->strstart - s->block_start;
+    if (left >= min_block ||
+        ((left || flush == Z_FINISH) && flush != Z_NO_FLUSH &&
+         s->strm->avail_in == 0 && left <= have)) {
+        len = MIN(left, have);
+        last = flush == Z_FINISH && s->strm->avail_in == 0 &&
+               len == left ? 1 : 0;
+        _tr_stored_block(s, (charf *)s->window + s->block_start, len, last);
+        s->block_start += len;
+        flush_pending(s->strm);
+    }
+
+    /* We've done all we can with the available input and output. */
+    return last ? finish_started : need_more;
 }
 
 /* ===========================================================================
@@ -1651,7 +1892,7 @@ local block_state deflate_fast(s, flush)
          */
         hash_head = NIL;
         if (s->lookahead >= MIN_MATCH) {
-            INSERT_STRING(s, s->strstart, hash_head);
+            hash_head = insert_string(s, s->strstart);
         }
 
         /* Find the longest match, discarding those <= prev_length.
@@ -1682,7 +1923,7 @@ local block_state deflate_fast(s, flush)
                 s->match_length--; /* string at strstart already in table */
                 do {
                     s->strstart++;
-                    INSERT_STRING(s, s->strstart, hash_head);
+                    hash_head = insert_string(s, s->strstart);
                     /* strstart never exceeds WSIZE-MAX_MATCH, so there are
                      * always MIN_MATCH bytes ahead.
                      */
@@ -1754,7 +1995,7 @@ local block_state deflate_slow(s, flush)
          */
         hash_head = NIL;
         if (s->lookahead >= MIN_MATCH) {
-            INSERT_STRING(s, s->strstart, hash_head);
+            hash_head = insert_string(s, s->strstart);
         }
 
         /* Find the longest match, discarding those <= prev_length.
@@ -1805,7 +2046,7 @@ local block_state deflate_slow(s, flush)
             s->prev_length -= 2;
             do {
                 if (++s->strstart <= max_insert) {
-                    INSERT_STRING(s, s->strstart, hash_head);
+                    hash_head = insert_string(s, s->strstart);
                 }
             } while (--s->prev_length != 0);
             s->match_available = 0;
@@ -1892,7 +2133,7 @@ local block_state deflate_rle(s, flush)
                          prev == *++scan && prev == *++scan &&
                          prev == *++scan && prev == *++scan &&
                          scan < strend);
-                s->match_length = MAX_MATCH - (int)(strend - scan);
+                s->match_length = MAX_MATCH - (uInt)(strend - scan);
                 if (s->match_length > s->lookahead)
                     s->match_length = s->lookahead;
             }
@@ -1965,3 +2206,37 @@ local block_state deflate_huff(s, flush)
         FLUSH_BLOCK(s, 0);
     return block_done;
 }
+
+/* Safe to inline this as GCC/clang will use inline asm and Visual Studio will
+ * use intrinsic without extra params
+ */
+local INLINE Pos insert_string_sse(deflate_state *const s, const Pos str)
+{
+    Pos ret;
+    unsigned *ip, val, h = 0;
+
+    ip = (unsigned *)&s->window[str];
+    val = *ip;
+
+    if (s->level >= 6)
+        val &= 0xFFFFFF;
+
+/* Windows clang should use inline asm */
+#if defined(_MSC_VER) && !defined(__clang__)
+    h = _mm_crc32_u32(h, val);
+#elif defined(__i386__) || defined(__amd64__)
+    __asm__ __volatile__ (
+        "crc32 %1,%0\n\t"
+    : "+r" (h)
+    : "r" (val)
+    );
+#else
+    /* This should never happen */
+    assert(0);
+#endif
+
+    ret = s->head[h & s->hash_mask];
+    s->head[h & s->hash_mask] = str;
+    s->prev[str & s->w_mask] = ret;
+    return ret;
+}
diff --git a/modules/zlib/src/deflate.h b/modules/zlib/src/deflate.h
index ce0299edd..ab56df766 100644
--- a/modules/zlib/src/deflate.h
+++ b/modules/zlib/src/deflate.h
@@ -1,5 +1,5 @@
 /* deflate.h -- internal compression state
- * Copyright (C) 1995-2012 Jean-loup Gailly
+ * Copyright (C) 1995-2016 Jean-loup Gailly
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -51,13 +51,16 @@
 #define Buf_size 16
 /* size of bit buffer in bi_buf */
 
-#define INIT_STATE    42
-#define EXTRA_STATE   69
-#define NAME_STATE    73
-#define COMMENT_STATE 91
-#define HCRC_STATE   103
-#define BUSY_STATE   113
-#define FINISH_STATE 666
+#define INIT_STATE    42    /* zlib header -> BUSY_STATE */
+#ifdef GZIP
+#  define GZIP_STATE  57    /* gzip header -> BUSY_STATE | EXTRA_STATE */
+#endif
+#define EXTRA_STATE   69    /* gzip extra block -> NAME_STATE */
+#define NAME_STATE    73    /* gzip file name -> COMMENT_STATE */
+#define COMMENT_STATE 91    /* gzip comment -> HCRC_STATE */
+#define HCRC_STATE   103    /* gzip header CRC -> BUSY_STATE */
+#define BUSY_STATE   113    /* deflate -> FINISH_STATE */
+#define FINISH_STATE 666    /* stream complete */
 /* Stream status */
 
 
@@ -83,7 +86,7 @@ typedef struct static_tree_desc_s  static_tree_desc;
 typedef struct tree_desc_s {
     ct_data *dyn_tree;           /* the dynamic tree */
     int     max_code;            /* largest code with non zero frequency */
-    static_tree_desc *stat_desc; /* the corresponding static tree */
+    const static_tree_desc *stat_desc;  /* the corresponding static tree */
 } FAR tree_desc;
 
 typedef ush Pos;
@@ -100,13 +103,13 @@ typedef struct internal_state {
     Bytef *pending_buf;  /* output still pending */
     ulg   pending_buf_size; /* size of pending_buf */
     Bytef *pending_out;  /* next pending byte to output to the stream */
-    uInt   pending;      /* nb of bytes in the pending buffer */
+    ulg   pending;       /* nb of bytes in the pending buffer */
     int   wrap;          /* bit 0 true for zlib, bit 1 true for gzip */
     gz_headerp  gzhead;  /* gzip header information to write */
-    uInt   gzindex;      /* where in extra, name, or comment */
+    ulg   gzindex;       /* where in extra, name, or comment */
     Byte  method;        /* can only be DEFLATED */
     int   last_flush;    /* value of flush param for previous deflate call */
-
+    unsigned zalign(16) crc0[4 * 5];
                 /* used by deflate.c: */
 
     uInt  w_size;        /* LZ77 window size (32K by default) */
@@ -249,7 +252,7 @@ typedef struct internal_state {
     uInt matches;       /* number of string matches in current block */
     uInt insert;        /* bytes at end of window left to insert */
 
-#ifdef DEBUG
+#ifdef ZLIB_DEBUG
     ulg compressed_len; /* total bit length of compressed file mod 2^32 */
     ulg bits_sent;      /* bit length of compressed data sent mod 2^32 */
 #endif
@@ -275,7 +278,7 @@ typedef struct internal_state {
 /* Output a byte on the stream.
  * IN assertion: there is enough room in pending_buf.
  */
-#define put_byte(s, c) {s->pending_buf[s->pending++] = (c);}
+#define put_byte(s, c) {s->pending_buf[s->pending++] = (Bytef)(c);}
 
 
 #define MIN_LOOKAHEAD (MAX_MATCH+MIN_MATCH+1)
@@ -309,7 +312,7 @@ void ZLIB_INTERNAL _tr_stored_block OF((deflate_state *s, charf *buf,
  * used.
  */
 
-#ifndef DEBUG
+#ifndef ZLIB_DEBUG
 /* Inline versions of _tr_tally for speed: */
 
 #if defined(GEN_TREES_H) || !defined(STDC)
@@ -328,8 +331,8 @@ void ZLIB_INTERNAL _tr_stored_block OF((deflate_state *s, charf *buf,
     flush = (s->last_lit == s->lit_bufsize-1); \
    }
 # define _tr_tally_dist(s, distance, length, flush) \
-  { uch len = (length); \
-    ush dist = (distance); \
+  { uch len = (uch)(length); \
+    ush dist = (ush)(distance); \
     s->d_buf[s->last_lit] = dist; \
     s->l_buf[s->last_lit++] = len; \
     dist--; \
@@ -343,4 +346,14 @@ void ZLIB_INTERNAL _tr_stored_block OF((deflate_state *s, charf *buf,
               flush = _tr_tally(s, distance, length)
 #endif
 
+/* Functions that are SIMD optimised on x86 */
+void ZLIB_INTERNAL crc_fold_init(deflate_state* const s);
+void ZLIB_INTERNAL crc_fold_copy(deflate_state* const s,
+                                 unsigned char* dst,
+                                 const unsigned char* src,
+                                 long len);
+unsigned ZLIB_INTERNAL crc_fold_512to32(deflate_state* const s);
+
+void ZLIB_INTERNAL fill_window_sse(deflate_state* s);
+
 #endif /* DEFLATE_H */
diff --git a/modules/zlib/src/fill_window_sse.c b/modules/zlib/src/fill_window_sse.c
new file mode 100644
index 000000000..ed1e5d1d6
--- /dev/null
+++ b/modules/zlib/src/fill_window_sse.c
@@ -0,0 +1,177 @@
+/*
+ * Fill Window with SSE2-optimized hash shifting
+ *
+ * Copyright (C) 2013 Intel Corporation
+ * Authors:
+ *  Arjan van de Ven    <arjan@linux.intel.com>
+ *  Jim Kukunas         <james.t.kukunas@linux.intel.com>
+ *
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+#include <immintrin.h>
+#include "deflate.h"
+
+#define UPDATE_HASH(s,h,i) \
+    {\
+        if (s->level < 6) { \
+            h = (3483 * (s->window[i]) +\
+                 23081* (s->window[i+1]) +\
+                 6954 * (s->window[i+2]) +\
+                 20947* (s->window[i+3])) & s->hash_mask;\
+        } else {\
+            h = (25881* (s->window[i]) +\
+                 24674* (s->window[i+1]) +\
+                 25811* (s->window[i+2])) & s->hash_mask;\
+        }\
+    }\
+
+extern int deflate_read_buf OF((z_streamp strm, Bytef *buf, unsigned size));
+
+void fill_window_sse(deflate_state *s)
+{
+    const __m128i xmm_wsize = _mm_set1_epi16(s->w_size);
+
+    register unsigned n;
+    register Posf *p;
+    unsigned more;    /* Amount of free space at the end of the window. */
+    uInt wsize = s->w_size;
+
+    Assert(s->lookahead < MIN_LOOKAHEAD, "already enough lookahead");
+
+    do {
+        more = (unsigned)(s->window_size -(ulg)s->lookahead -(ulg)s->strstart);
+
+        /* Deal with !@#$% 64K limit: */
+        if (sizeof(int) <= 2) {
+            if (more == 0 && s->strstart == 0 && s->lookahead == 0) {
+                more = wsize;
+
+            } else if (more == (unsigned)(-1)) {
+                /* Very unlikely, but possible on 16 bit machine if
+                 * strstart == 0 && lookahead == 1 (input done a byte at time)
+                 */
+                more--;
+            }
+        }
+
+        /* If the window is almost full and there is insufficient lookahead,
+         * move the upper half to the lower one to make room in the upper half.
+         */
+        if (s->strstart >= wsize+MAX_DIST(s)) {
+
+            zmemcpy(s->window, s->window+wsize, (unsigned)wsize);
+            s->match_start -= wsize;
+            s->strstart    -= wsize; /* we now have strstart >= MAX_DIST */
+            s->block_start -= (long) wsize;
+
+            /* Slide the hash table (could be avoided with 32 bit values
+               at the expense of memory usage). We slide even when level == 0
+               to keep the hash table consistent if we switch back to level > 0
+               later. (Using level 0 permanently is not an optimal usage of
+               zlib, so we don't care about this pathological case.)
+             */
+            n = s->hash_size;
+            p = &s->head[n];
+            p -= 8;
+            do {
+                __m128i value, result;
+
+                value = _mm_loadu_si128((__m128i *)p);
+                result = _mm_subs_epu16(value, xmm_wsize);
+                _mm_storeu_si128((__m128i *)p, result);
+
+                p -= 8;
+                n -= 8;
+            } while (n > 0);
+
+            n = wsize;
+#ifndef FASTEST
+            p = &s->prev[n];
+            p -= 8;
+            do {
+                __m128i value, result;
+
+                value = _mm_loadu_si128((__m128i *)p);
+                result = _mm_subs_epu16(value, xmm_wsize);
+                _mm_storeu_si128((__m128i *)p, result);
+
+                p -= 8;
+                n -= 8;
+            } while (n > 0);
+#endif
+            more += wsize;
+        }
+        if (s->strm->avail_in == 0) break;
+
+        /* If there was no sliding:
+         *    strstart <= WSIZE+MAX_DIST-1 && lookahead <= MIN_LOOKAHEAD - 1 &&
+         *    more == window_size - lookahead - strstart
+         * => more >= window_size - (MIN_LOOKAHEAD-1 + WSIZE + MAX_DIST-1)
+         * => more >= window_size - 2*WSIZE + 2
+         * In the BIG_MEM or MMAP case (not yet supported),
+         *   window_size == input_size + MIN_LOOKAHEAD  &&
+         *   strstart + s->lookahead <= input_size => more >= MIN_LOOKAHEAD.
+         * Otherwise, window_size == 2*WSIZE so more >= 2.
+         * If there was sliding, more >= WSIZE. So in all cases, more >= 2.
+         */
+        Assert(more >= 2, "more < 2");
+
+        n = deflate_read_buf(s->strm,
+                             s->window + s->strstart + s->lookahead,
+                             more);
+        s->lookahead += n;
+
+        /* Initialize the hash value now that we have some input: */
+        if (s->lookahead >= MIN_MATCH) {
+            uInt str = s->strstart;
+            s->ins_h = s->window[str];
+            if (str >= 1)
+                UPDATE_HASH(s, s->ins_h, str + 1 - (MIN_MATCH-1));
+#if MIN_MATCH != 3
+            Call UPDATE_HASH() MIN_MATCH-3 more times
+#endif
+        }
+        /* If the whole input has less than MIN_MATCH bytes, ins_h is garbage,
+         * but this is not important since only literal bytes will be emitted.
+         */
+
+    } while (s->lookahead < MIN_LOOKAHEAD && s->strm->avail_in != 0);
+
+    /* If the WIN_INIT bytes after the end of the current data have never been
+     * written, then zero those bytes in order to avoid memory check reports of
+     * the use of uninitialized (or uninitialised as Julian writes) bytes by
+     * the longest match routines.  Update the high water mark for the next
+     * time through here.  WIN_INIT is set to MAX_MATCH since the longest match
+     * routines allow scanning to strstart + MAX_MATCH, ignoring lookahead.
+     */
+    if (s->high_water < s->window_size) {
+        ulg curr = s->strstart + (ulg)(s->lookahead);
+        ulg init;
+
+        if (s->high_water < curr) {
+            /* Previous high water mark below current data -- zero WIN_INIT
+             * bytes or up to end of window, whichever is less.
+             */
+            init = s->window_size - curr;
+            if (init > WIN_INIT)
+                init = WIN_INIT;
+            zmemzero(s->window + curr, (unsigned)init);
+            s->high_water = curr + init;
+        }
+        else if (s->high_water < (ulg)curr + WIN_INIT) {
+            /* High water mark at or above current data, but below current data
+             * plus WIN_INIT -- zero out to current data plus WIN_INIT, or up
+             * to end of window, whichever is less.
+             */
+            init = (ulg)curr + WIN_INIT - s->high_water;
+            if (init > s->window_size - s->high_water)
+                init = s->window_size - s->high_water;
+            zmemzero(s->window + s->high_water, (unsigned)init);
+            s->high_water += init;
+        }
+    }
+
+    Assert((ulg)s->strstart <= s->window_size - MIN_LOOKAHEAD,
+           "not enough room for search");
+}
diff --git a/modules/zlib/src/gzguts.h b/modules/zlib/src/gzguts.h
index d87659d03..990a4d251 100644
--- a/modules/zlib/src/gzguts.h
+++ b/modules/zlib/src/gzguts.h
@@ -1,5 +1,5 @@
 /* gzguts.h -- zlib internal header definitions for gz* operations
- * Copyright (C) 2004, 2005, 2010, 2011, 2012, 2013 Mark Adler
+ * Copyright (C) 2004, 2005, 2010, 2011, 2012, 2013, 2016 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -25,6 +25,10 @@
 #  include <stdlib.h>
 #  include <limits.h>
 #endif
+
+#ifndef _POSIX_SOURCE
+#  define _POSIX_SOURCE
+#endif
 #include <fcntl.h>
 
 #ifdef _WIN32
@@ -35,6 +39,10 @@
 #  include <io.h>
 #endif
 
+#if defined(_WIN32) || defined(__CYGWIN__)
+#  define WIDECHAR
+#endif
+
 #ifdef WINAPI_FAMILY
 #  define open _open
 #  define read _read
@@ -95,18 +103,19 @@
 #  endif
 #endif
 
-/* unlike snprintf (which is required in C99, yet still not supported by
-   Microsoft more than a decade later!), _snprintf does not guarantee null
-   termination of the result -- however this is only used in gzlib.c where
+/* unlike snprintf (which is required in C99), _snprintf does not guarantee
+   null termination of the result -- however this is only used in gzlib.c where
    the result is assured to fit in the space provided */
-#ifdef _MSC_VER
+#if defined(_MSC_VER) && _MSC_VER < 1900
 #  define snprintf _snprintf
 #endif
 
 #ifndef local
 #  define local static
 #endif
-/* compile with -Dlocal if your debugger can't find static symbols */
+/* since "static" is used to mean two completely different things in C, we
+   define "local" for the non-static meaning of "static", for readability
+   (compile with -Dlocal if your debugger can't find static symbols) */
 
 /* gz* functions always use library allocation functions */
 #ifndef STDC
@@ -170,7 +179,7 @@ typedef struct {
     char *path;             /* path or fd for error messages */
     unsigned size;          /* buffer size, zero if not allocated yet */
     unsigned want;          /* requested buffer size, default is GZBUFSIZE */
-    unsigned char *in;      /* input buffer */
+    unsigned char *in;      /* input buffer (double-sized when writing) */
     unsigned char *out;     /* output buffer (double-sized when reading) */
     int direct;             /* 0 if processing gzip, 1 if transparent */
         /* just for reading */
diff --git a/modules/zlib/src/gzlib.c b/modules/zlib/src/gzlib.c
index fae202ef8..4105e6aff 100644
--- a/modules/zlib/src/gzlib.c
+++ b/modules/zlib/src/gzlib.c
@@ -1,11 +1,11 @@
 /* gzlib.c -- zlib functions common to reading and writing gzip files
- * Copyright (C) 2004, 2010, 2011, 2012, 2013 Mark Adler
+ * Copyright (C) 2004-2017 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
 #include "gzguts.h"
 
-#if defined(_WIN32) && !defined(__BORLANDC__)
+#if defined(_WIN32) && !defined(__BORLANDC__) && !defined(__MINGW32__)
 #  define LSEEK _lseeki64
 #else
 #if defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0
@@ -94,7 +94,7 @@ local gzFile gz_open(path, fd, mode)
     const char *mode;
 {
     gz_statep state;
-    size_t len;
+    z_size_t len;
     int oflag;
 #ifdef O_CLOEXEC
     int cloexec = 0;
@@ -188,10 +188,10 @@ local gzFile gz_open(path, fd, mode)
     }
 
     /* save the path name for error messages */
-#ifdef _WIN32
+#ifdef WIDECHAR
     if (fd == -2) {
         len = wcstombs(NULL, path, 0);
-        if (len == (size_t)-1)
+        if (len == (z_size_t)-1)
             len = 0;
     }
     else
@@ -202,7 +202,7 @@ local gzFile gz_open(path, fd, mode)
         free(state);
         return NULL;
     }
-#ifdef _WIN32
+#ifdef WIDECHAR
     if (fd == -2)
         if (len)
             wcstombs(state->path, path, len + 1);
@@ -211,7 +211,7 @@ local gzFile gz_open(path, fd, mode)
     else
 #endif
 #if !defined(NO_snprintf) && !defined(NO_vsnprintf)
-        snprintf(state->path, len + 1, "%s", (const char *)path);
+        (void)snprintf(state->path, len + 1, "%s", (const char *)path);
 #else
         strcpy(state->path, path);
 #endif
@@ -239,7 +239,7 @@ local gzFile gz_open(path, fd, mode)
 
     /* open the file with the appropriate flags (or just use fd) */
     state->fd = fd > -1 ? fd : (
-#ifdef _WIN32
+#ifdef WIDECHAR
         fd == -2 ? _wopen(path, oflag, 0666) :
 #endif
         open((const char *)path, oflag, 0666));
@@ -248,8 +248,10 @@ local gzFile gz_open(path, fd, mode)
         free(state);
         return NULL;
     }
-    if (state->mode == GZ_APPEND)
+    if (state->mode == GZ_APPEND) {
+        LSEEK(state->fd, 0, SEEK_END);  /* so gzoffset() is correct */
         state->mode = GZ_WRITE;         /* simplify later checks */
+    }
 
     /* save the current position for rewinding (only if reading) */
     if (state->mode == GZ_READ) {
@@ -291,7 +293,7 @@ gzFile ZEXPORT gzdopen(fd, mode)
     if (fd == -1 || (path = (char *)malloc(7 + 3 * sizeof(int))) == NULL)
         return NULL;
 #if !defined(NO_snprintf) && !defined(NO_vsnprintf)
-    snprintf(path, 7 + 3 * sizeof(int), "<fd:%d>", fd); /* for debugging */
+    (void)snprintf(path, 7 + 3 * sizeof(int), "<fd:%d>", fd);
 #else
     sprintf(path, "<fd:%d>", fd);   /* for debugging */
 #endif
@@ -301,7 +303,7 @@ gzFile ZEXPORT gzdopen(fd, mode)
 }
 
 /* -- see zlib.h -- */
-#ifdef _WIN32
+#ifdef WIDECHAR
 gzFile ZEXPORT gzopen_w(path, mode)
     const wchar_t *path;
     const char *mode;
@@ -329,6 +331,8 @@ int ZEXPORT gzbuffer(file, size)
         return -1;
 
     /* check and set requested size */
+    if ((size << 1) < size)
+        return -1;              /* need to be able to double it */
     if (size < 2)
         size = 2;               /* need two bytes to check magic header */
     state->want = size;
@@ -604,14 +608,13 @@ void ZLIB_INTERNAL gz_error(state, err, msg)
         return;
     }
 #if !defined(NO_snprintf) && !defined(NO_vsnprintf)
-    snprintf(state->msg, strlen(state->path) + strlen(msg) + 3,
-             "%s%s%s", state->path, ": ", msg);
+    (void)snprintf(state->msg, strlen(state->path) + strlen(msg) + 3,
+                   "%s%s%s", state->path, ": ", msg);
 #else
     strcpy(state->msg, state->path);
     strcat(state->msg, ": ");
     strcat(state->msg, msg);
 #endif
-    return;
 }
 
 #ifndef INT_MAX
diff --git a/modules/zlib/src/gzread.c b/modules/zlib/src/gzread.c
index bf4538eb2..832d3ef98 100644
--- a/modules/zlib/src/gzread.c
+++ b/modules/zlib/src/gzread.c
@@ -1,5 +1,5 @@
 /* gzread.c -- zlib functions for reading gzip files
- * Copyright (C) 2004, 2005, 2010, 2011, 2012, 2013 Mark Adler
+ * Copyright (C) 2004, 2005, 2010, 2011, 2012, 2013, 2016 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -12,6 +12,7 @@ local int gz_look OF((gz_statep));
 local int gz_decomp OF((gz_statep));
 local int gz_fetch OF((gz_statep));
 local int gz_skip OF((gz_statep, z_off64_t));
+local z_size_t gz_read OF((gz_statep, voidp, z_size_t));
 
 /* Use read() to load a buffer -- return -1 on error, otherwise 0.  Read from
    state->fd, and update state->eof, state->err, and state->msg as appropriate.
@@ -24,13 +25,17 @@ local int gz_load(state, buf, len, have)
     unsigned *have;
 {
     int ret;
+    unsigned get, max = ((unsigned)-1 >> 2) + 1;
 
     *have = 0;
     do {
-        ret = read(state->fd, buf + *have, len - *have);
+        get = len - *have;
+        if (get > max)
+            get = max;
+        ret = read(state->fd, buf + *have, get);
         if (ret <= 0)
             break;
-        *have += ret;
+        *have += (unsigned)ret;
     } while (*have < len);
     if (ret < 0) {
         gz_error(state, Z_ERRNO, zstrerror());
@@ -94,10 +99,8 @@ local int gz_look(state)
         state->in = (unsigned char *)malloc(state->want);
         state->out = (unsigned char *)malloc(state->want << 1);
         if (state->in == NULL || state->out == NULL) {
-            if (state->out != NULL)
-                free(state->out);
-            if (state->in != NULL)
-                free(state->in);
+            free(state->out);
+            free(state->in);
             gz_error(state, Z_MEM_ERROR, "out of memory");
             return -1;
         }
@@ -284,33 +287,17 @@ local int gz_skip(state, len)
     return 0;
 }
 
-/* -- see zlib.h -- */
-int ZEXPORT gzread(file, buf, len)
-    gzFile file;
+/* Read len bytes into buf from file, or less than len up to the end of the
+   input.  Return the number of bytes read.  If zero is returned, either the
+   end of file was reached, or there was an error.  state->err must be
+   consulted in that case to determine which. */
+local z_size_t gz_read(state, buf, len)
+    gz_statep state;
     voidp buf;
-    unsigned len;
+    z_size_t len;
 {
-    unsigned got, n;
-    gz_statep state;
-    z_streamp strm;
-
-    /* get internal structure */
-    if (file == NULL)
-        return -1;
-    state = (gz_statep)file;
-    strm = &(state->strm);
-
-    /* check that we're reading and that there's no (serious) error */
-    if (state->mode != GZ_READ ||
-            (state->err != Z_OK && state->err != Z_BUF_ERROR))
-        return -1;
-
-    /* since an int is returned, make sure len fits in one, otherwise return
-       with an error (this avoids the flaw in the interface) */
-    if ((int)len < 0) {
-        gz_error(state, Z_DATA_ERROR, "requested length does not fit in int");
-        return -1;
-    }
+    z_size_t got;
+    unsigned n;
 
     /* if len is zero, avoid unnecessary operations */
     if (len == 0)
@@ -320,32 +307,38 @@ int ZEXPORT gzread(file, buf, len)
     if (state->seek) {
         state->seek = 0;
         if (gz_skip(state, state->skip) == -1)
-            return -1;
+            return 0;
     }
 
     /* get len bytes to buf, or less than len if at the end */
     got = 0;
     do {
+        /* set n to the maximum amount of len that fits in an unsigned int */
+        n = -1;
+        if (n > len)
+            n = len;
+
         /* first just try copying data from the output buffer */
         if (state->x.have) {
-            n = state->x.have > len ? len : state->x.have;
+            if (state->x.have < n)
+                n = state->x.have;
             memcpy(buf, state->x.next, n);
             state->x.next += n;
             state->x.have -= n;
         }
 
         /* output buffer empty -- return if we're at the end of the input */
-        else if (state->eof && strm->avail_in == 0) {
+        else if (state->eof && state->strm.avail_in == 0) {
             state->past = 1;        /* tried to read past end */
             break;
         }
 
         /* need output data -- for small len or new stream load up our output
            buffer */
-        else if (state->how == LOOK || len < (state->size << 1)) {
+        else if (state->how == LOOK || n < (state->size << 1)) {
             /* get more output, looking for header if required */
             if (gz_fetch(state) == -1)
-                return -1;
+                return 0;
             continue;       /* no progress yet -- go back to copy above */
             /* the copy above assures that we will leave with space in the
                output buffer, allowing at least one gzungetc() to succeed */
@@ -353,16 +346,16 @@ int ZEXPORT gzread(file, buf, len)
 
         /* large len -- read directly into user buffer */
         else if (state->how == COPY) {      /* read directly */
-            if (gz_load(state, (unsigned char *)buf, len, &n) == -1)
-                return -1;
+            if (gz_load(state, (unsigned char *)buf, n, &n) == -1)
+                return 0;
         }
 
         /* large len -- decompress directly into user buffer */
         else {  /* state->how == GZIP */
-            strm->avail_out = len;
-            strm->next_out = (unsigned char *)buf;
+            state->strm.avail_out = n;
+            state->strm.next_out = (unsigned char *)buf;
             if (gz_decomp(state) == -1)
-                return -1;
+                return 0;
             n = state->x.have;
             state->x.have = 0;
         }
@@ -374,8 +367,75 @@ int ZEXPORT gzread(file, buf, len)
         state->x.pos += n;
     } while (len);
 
-    /* return number of bytes read into user buffer (will fit in int) */
-    return (int)got;
+    /* return number of bytes read into user buffer */
+    return got;
+}
+
+/* -- see zlib.h -- */
+int ZEXPORT gzread(file, buf, len)
+    gzFile file;
+    voidp buf;
+    unsigned len;
+{
+    gz_statep state;
+
+    /* get internal structure */
+    if (file == NULL)
+        return -1;
+    state = (gz_statep)file;
+
+    /* check that we're reading and that there's no (serious) error */
+    if (state->mode != GZ_READ ||
+            (state->err != Z_OK && state->err != Z_BUF_ERROR))
+        return -1;
+
+    /* since an int is returned, make sure len fits in one, otherwise return
+       with an error (this avoids a flaw in the interface) */
+    if ((int)len < 0) {
+        gz_error(state, Z_STREAM_ERROR, "request does not fit in an int");
+        return -1;
+    }
+
+    /* read len or fewer bytes to buf */
+    len = gz_read(state, buf, len);
+
+    /* check for an error */
+    if (len == 0 && state->err != Z_OK && state->err != Z_BUF_ERROR)
+        return -1;
+
+    /* return the number of bytes read (this is assured to fit in an int) */
+    return (int)len;
+}
+
+/* -- see zlib.h -- */
+z_size_t ZEXPORT gzfread(buf, size, nitems, file)
+    voidp buf;
+    z_size_t size;
+    z_size_t nitems;
+    gzFile file;
+{
+    z_size_t len;
+    gz_statep state;
+
+    /* get internal structure */
+    if (file == NULL)
+        return 0;
+    state = (gz_statep)file;
+
+    /* check that we're reading and that there's no (serious) error */
+    if (state->mode != GZ_READ ||
+            (state->err != Z_OK && state->err != Z_BUF_ERROR))
+        return 0;
+
+    /* compute bytes to read -- error on overflow */
+    len = nitems * size;
+    if (size && len / size != nitems) {
+        gz_error(state, Z_STREAM_ERROR, "request does not fit in a size_t");
+        return 0;
+    }
+
+    /* read len or fewer bytes to buf, return the number of full items read */
+    return len ? gz_read(state, buf, len) / size : 0;
 }
 
 /* -- see zlib.h -- */
@@ -383,7 +443,11 @@ int ZEXPORT gzread(file, buf, len)
 #  undef z_gzgetc
 #else
 #  undef gzgetc
+#  ifdef Z_CR_PREFIX_SET
+#    define gzgetc Cr_z_gzgetc
+#  endif
 #endif
+
 int ZEXPORT gzgetc(file)
     gzFile file;
 {
@@ -408,8 +472,8 @@ int ZEXPORT gzgetc(file)
         return *(state->x.next)++;
     }
 
-    /* nothing there -- try gzread() */
-    ret = gzread(file, buf, 1);
+    /* nothing there -- try gz_read() */
+    ret = gz_read(state, buf, 1);
     return ret < 1 ? -1 : buf[0];
 }
 
@@ -451,7 +515,7 @@ int ZEXPORT gzungetc(c, file)
     if (state->x.have == 0) {
         state->x.have = 1;
         state->x.next = state->out + (state->size << 1) - 1;
-        state->x.next[0] = c;
+        state->x.next[0] = (unsigned char)c;
         state->x.pos--;
         state->past = 0;
         return c;
@@ -473,7 +537,7 @@ int ZEXPORT gzungetc(c, file)
     }
     state->x.have++;
     state->x.next--;
-    state->x.next[0] = c;
+    state->x.next[0] = (unsigned char)c;
     state->x.pos--;
     state->past = 0;
     return c;
diff --git a/modules/zlib/src/gzwrite.c b/modules/zlib/src/gzwrite.c
index aa767fbf6..c7b5651d7 100644
--- a/modules/zlib/src/gzwrite.c
+++ b/modules/zlib/src/gzwrite.c
@@ -1,5 +1,5 @@
 /* gzwrite.c -- zlib functions for writing gzip files
- * Copyright (C) 2004, 2005, 2010, 2011, 2012, 2013 Mark Adler
+ * Copyright (C) 2004-2017 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -9,17 +9,19 @@
 local int gz_init OF((gz_statep));
 local int gz_comp OF((gz_statep, int));
 local int gz_zero OF((gz_statep, z_off64_t));
+local z_size_t gz_write OF((gz_statep, voidpc, z_size_t));
 
 /* Initialize state for writing a gzip file.  Mark initialization by setting
-   state->size to non-zero.  Return -1 on failure or 0 on success. */
+   state->size to non-zero.  Return -1 on a memory allocation failure, or 0 on
+   success. */
 local int gz_init(state)
     gz_statep state;
 {
     int ret;
     z_streamp strm = &(state->strm);
 
-    /* allocate input buffer */
-    state->in = (unsigned char *)malloc(state->want);
+    /* allocate input buffer (double size for gzprintf) */
+    state->in = (unsigned char *)malloc(state->want << 1);
     if (state->in == NULL) {
         gz_error(state, Z_MEM_ERROR, "out of memory");
         return -1;
@@ -47,6 +49,7 @@ local int gz_init(state)
             gz_error(state, Z_MEM_ERROR, "out of memory");
             return -1;
         }
+        strm->next_in = NULL;
     }
 
     /* mark state as initialized */
@@ -62,17 +65,17 @@ local int gz_init(state)
 }
 
 /* Compress whatever is at avail_in and next_in and write to the output file.
-   Return -1 if there is an error writing to the output file, otherwise 0.
-   flush is assumed to be a valid deflate() flush value.  If flush is Z_FINISH,
-   then the deflate() state is reset to start a new gzip stream.  If gz->direct
-   is true, then simply write to the output file without compressing, and
-   ignore flush. */
+   Return -1 if there is an error writing to the output file or if gz_init()
+   fails to allocate memory, otherwise 0.  flush is assumed to be a valid
+   deflate() flush value.  If flush is Z_FINISH, then the deflate() state is
+   reset to start a new gzip stream.  If gz->direct is true, then simply write
+   to the output file without compressing, and ignore flush. */
 local int gz_comp(state, flush)
     gz_statep state;
     int flush;
 {
-    int ret, got;
-    unsigned have;
+    int ret, writ;
+    unsigned have, put, max = ((unsigned)-1 >> 2) + 1;
     z_streamp strm = &(state->strm);
 
     /* allocate memory if this is the first time through */
@@ -81,12 +84,16 @@ local int gz_comp(state, flush)
 
     /* write directly if requested */
     if (state->direct) {
-        got = write(state->fd, strm->next_in, strm->avail_in);
-        if (got < 0 || (unsigned)got != strm->avail_in) {
-            gz_error(state, Z_ERRNO, zstrerror());
-            return -1;
+        while (strm->avail_in) {
+            put = strm->avail_in > max ? max : strm->avail_in;
+            writ = write(state->fd, strm->next_in, put);
+            if (writ < 0) {
+                gz_error(state, Z_ERRNO, zstrerror());
+                return -1;
+            }
+            strm->avail_in -= (unsigned)writ;
+            strm->next_in += writ;
         }
-        strm->avail_in = 0;
         return 0;
     }
 
@@ -97,17 +104,21 @@ local int gz_comp(state, flush)
            doing Z_FINISH then don't write until we get to Z_STREAM_END */
         if (strm->avail_out == 0 || (flush != Z_NO_FLUSH &&
             (flush != Z_FINISH || ret == Z_STREAM_END))) {
-            have = (unsigned)(strm->next_out - state->x.next);
-            if (have && ((got = write(state->fd, state->x.next, have)) < 0 ||
-                         (unsigned)got != have)) {
-                gz_error(state, Z_ERRNO, zstrerror());
-                return -1;
+            while (strm->next_out > state->x.next) {
+                put = strm->next_out - state->x.next > (int)max ? max :
+                      (unsigned)(strm->next_out - state->x.next);
+                writ = write(state->fd, state->x.next, put);
+                if (writ < 0) {
+                    gz_error(state, Z_ERRNO, zstrerror());
+                    return -1;
+                }
+                state->x.next += writ;
             }
             if (strm->avail_out == 0) {
                 strm->avail_out = state->size;
                 strm->next_out = state->out;
+                state->x.next = state->out;
             }
-            state->x.next = strm->next_out;
         }
 
         /* compress */
@@ -129,7 +140,8 @@ local int gz_comp(state, flush)
     return 0;
 }
 
-/* Compress len zeros to output.  Return -1 on error, 0 on success. */
+/* Compress len zeros to output.  Return -1 on a write error or memory
+   allocation failure by gz_comp(), or 0 on success. */
 local int gz_zero(state, len)
     gz_statep state;
     z_off64_t len;
@@ -161,32 +173,14 @@ local int gz_zero(state, len)
     return 0;
 }
 
-/* -- see zlib.h -- */
-int ZEXPORT gzwrite(file, buf, len)
-    gzFile file;
+/* Write len bytes from buf to file.  Return the number of bytes written.  If
+   the returned value is less than len, then there was an error. */
+local z_size_t gz_write(state, buf, len)
+    gz_statep state;
     voidpc buf;
-    unsigned len;
+    z_size_t len;
 {
-    unsigned put = len;
-    gz_statep state;
-    z_streamp strm;
-
-    /* get internal structure */
-    if (file == NULL)
-        return 0;
-    state = (gz_statep)file;
-    strm = &(state->strm);
-
-    /* check that we're writing and that there's no error */
-    if (state->mode != GZ_WRITE || state->err != Z_OK)
-        return 0;
-
-    /* since an int is returned, make sure len fits in one, otherwise return
-       with an error (this avoids the flaw in the interface) */
-    if ((int)len < 0) {
-        gz_error(state, Z_DATA_ERROR, "requested length does not fit in int");
-        return 0;
-    }
+    z_size_t put = len;
 
     /* if len is zero, avoid unnecessary operations */
     if (len == 0)
@@ -209,14 +203,15 @@ int ZEXPORT gzwrite(file, buf, len)
         do {
             unsigned have, copy;
 
-            if (strm->avail_in == 0)
-                strm->next_in = state->in;
-            have = (unsigned)((strm->next_in + strm->avail_in) - state->in);
+            if (state->strm.avail_in == 0)
+                state->strm.next_in = state->in;
+            have = (unsigned)((state->strm.next_in + state->strm.avail_in) -
+                              state->in);
             copy = state->size - have;
             if (copy > len)
                 copy = len;
             memcpy(state->in + have, buf, copy);
-            strm->avail_in += copy;
+            state->strm.avail_in += copy;
             state->x.pos += copy;
             buf = (const char *)buf + copy;
             len -= copy;
@@ -226,19 +221,83 @@ int ZEXPORT gzwrite(file, buf, len)
     }
     else {
         /* consume whatever's left in the input buffer */
-        if (strm->avail_in && gz_comp(state, Z_NO_FLUSH) == -1)
+        if (state->strm.avail_in && gz_comp(state, Z_NO_FLUSH) == -1)
             return 0;
 
         /* directly compress user buffer to file */
-        strm->avail_in = len;
-        strm->next_in = (z_const Bytef *)buf;
-        state->x.pos += len;
-        if (gz_comp(state, Z_NO_FLUSH) == -1)
-            return 0;
+        state->strm.next_in = (z_const Bytef *)buf;
+        do {
+            unsigned n = (unsigned)-1;
+            if (n > len)
+                n = len;
+            state->strm.avail_in = n;
+            state->x.pos += n;
+            if (gz_comp(state, Z_NO_FLUSH) == -1)
+                return 0;
+            len -= n;
+        } while (len);
+    }
+
+    /* input was all buffered or compressed */
+    return put;
+}
+
+/* -- see zlib.h -- */
+int ZEXPORT gzwrite(file, buf, len)
+    gzFile file;
+    voidpc buf;
+    unsigned len;
+{
+    gz_statep state;
+
+    /* get internal structure */
+    if (file == NULL)
+        return 0;
+    state = (gz_statep)file;
+
+    /* check that we're writing and that there's no error */
+    if (state->mode != GZ_WRITE || state->err != Z_OK)
+        return 0;
+
+    /* since an int is returned, make sure len fits in one, otherwise return
+       with an error (this avoids a flaw in the interface) */
+    if ((int)len < 0) {
+        gz_error(state, Z_DATA_ERROR, "requested length does not fit in int");
+        return 0;
+    }
+
+    /* write len bytes from buf (the return value will fit in an int) */
+    return (int)gz_write(state, buf, len);
+}
+
+/* -- see zlib.h -- */
+z_size_t ZEXPORT gzfwrite(buf, size, nitems, file)
+    voidpc buf;
+    z_size_t size;
+    z_size_t nitems;
+    gzFile file;
+{
+    z_size_t len;
+    gz_statep state;
+
+    /* get internal structure */
+    if (file == NULL)
+        return 0;
+    state = (gz_statep)file;
+
+    /* check that we're writing and that there's no error */
+    if (state->mode != GZ_WRITE || state->err != Z_OK)
+        return 0;
+
+    /* compute bytes to read -- error on overflow */
+    len = nitems * size;
+    if (size && len / size != nitems) {
+        gz_error(state, Z_STREAM_ERROR, "request does not fit in a size_t");
+        return 0;
     }
 
-    /* input was all buffered or compressed (put will fit in int) */
-    return (int)put;
+    /* write len bytes to buf, return the number of full items written */
+    return len ? gz_write(state, buf, len) / size : 0;
 }
 
 /* -- see zlib.h -- */
@@ -275,7 +334,7 @@ int ZEXPORT gzputc(file, c)
             strm->next_in = state->in;
         have = (unsigned)((strm->next_in + strm->avail_in) - state->in);
         if (have < state->size) {
-            state->in[have] = c;
+            state->in[have] = (unsigned char)c;
             strm->avail_in++;
             state->x.pos++;
             return c & 0xff;
@@ -283,8 +342,8 @@ int ZEXPORT gzputc(file, c)
     }
 
     /* no room in buffer or not initialized, use gz_write() */
-    buf[0] = c;
-    if (gzwrite(file, buf, 1) != 1)
+    buf[0] = (unsigned char)c;
+    if (gz_write(state, buf, 1) != 1)
         return -1;
     return c & 0xff;
 }
@@ -295,11 +354,21 @@ int ZEXPORT gzputs(file, str)
     const char *str;
 {
     int ret;
-    unsigned len;
+    z_size_t len;
+    gz_statep state;
+
+    /* get internal structure */
+    if (file == NULL)
+        return -1;
+    state = (gz_statep)file;
+
+    /* check that we're writing and that there's no error */
+    if (state->mode != GZ_WRITE || state->err != Z_OK)
+        return -1;
 
     /* write string */
-    len = (unsigned)strlen(str);
-    ret = gzwrite(file, str, len);
+    len = strlen(str);
+    ret = gz_write(state, str, len);
     return ret == 0 && len != 0 ? -1 : ret;
 }
 
@@ -309,63 +378,73 @@ int ZEXPORT gzputs(file, str)
 /* -- see zlib.h -- */
 int ZEXPORTVA gzvprintf(gzFile file, const char *format, va_list va)
 {
-    int size, len;
+    int len;
+    unsigned left;
+    char *next;
     gz_statep state;
     z_streamp strm;
 
     /* get internal structure */
     if (file == NULL)
-        return -1;
+        return Z_STREAM_ERROR;
     state = (gz_statep)file;
     strm = &(state->strm);
 
     /* check that we're writing and that there's no error */
     if (state->mode != GZ_WRITE || state->err != Z_OK)
-        return 0;
+        return Z_STREAM_ERROR;
 
     /* make sure we have some buffer space */
     if (state->size == 0 && gz_init(state) == -1)
-        return 0;
+        return state->err;
 
     /* check for seek request */
     if (state->seek) {
         state->seek = 0;
         if (gz_zero(state, state->skip) == -1)
-            return 0;
+            return state->err;
     }
 
-    /* consume whatever's left in the input buffer */
-    if (strm->avail_in && gz_comp(state, Z_NO_FLUSH) == -1)
-        return 0;
-
-    /* do the printf() into the input buffer, put length in len */
-    size = (int)(state->size);
-    state->in[size - 1] = 0;
+    /* do the printf() into the input buffer, put length in len -- the input
+       buffer is double-sized just for this function, so there is guaranteed to
+       be state->size bytes available after the current contents */
+    if (strm->avail_in == 0)
+        strm->next_in = state->in;
+    next = (char *)(state->in + (strm->next_in - state->in) + strm->avail_in);
+    next[state->size - 1] = 0;
 #ifdef NO_vsnprintf
 #  ifdef HAS_vsprintf_void
-    (void)vsprintf((char *)(state->in), format, va);
-    for (len = 0; len < size; len++)
-        if (state->in[len] == 0) break;
+    (void)vsprintf(next, format, va);
+    for (len = 0; len < state->size; len++)
+        if (next[len] == 0) break;
 #  else
-    len = vsprintf((char *)(state->in), format, va);
+    len = vsprintf(next, format, va);
 #  endif
 #else
 #  ifdef HAS_vsnprintf_void
-    (void)vsnprintf((char *)(state->in), size, format, va);
-    len = strlen((char *)(state->in));
+    (void)vsnprintf(next, state->size, format, va);
+    len = strlen(next);
 #  else
-    len = vsnprintf((char *)(state->in), size, format, va);
+    len = vsnprintf(next, state->size, format, va);
 #  endif
 #endif
 
     /* check that printf() results fit in buffer */
-    if (len <= 0 || len >= (int)size || state->in[size - 1] != 0)
+    if (len == 0 || (unsigned)len >= state->size || next[state->size - 1] != 0)
         return 0;
 
-    /* update buffer and position, defer compression until needed */
-    strm->avail_in = (unsigned)len;
-    strm->next_in = state->in;
+    /* update buffer and position, compress first half if past that */
+    strm->avail_in += (unsigned)len;
     state->x.pos += len;
+    if (strm->avail_in >= state->size) {
+        left = strm->avail_in - state->size;
+        strm->avail_in = state->size;
+        if (gz_comp(state, Z_NO_FLUSH) == -1)
+            return state->err;
+        memcpy(state->in, state->in + state->size, left);
+        strm->next_in = state->in;
+        strm->avail_in = left;
+    }
     return len;
 }
 
@@ -390,73 +469,82 @@ int ZEXPORTVA gzprintf (file, format, a1, a2, a3, a4, a5, a6, a7, a8, a9, a10,
     int a1, a2, a3, a4, a5, a6, a7, a8, a9, a10,
         a11, a12, a13, a14, a15, a16, a17, a18, a19, a20;
 {
-    int size, len;
+    unsigned len, left;
+    char *next;
     gz_statep state;
     z_streamp strm;
 
     /* get internal structure */
     if (file == NULL)
-        return -1;
+        return Z_STREAM_ERROR;
     state = (gz_statep)file;
     strm = &(state->strm);
 
     /* check that can really pass pointer in ints */
     if (sizeof(int) != sizeof(void *))
-        return 0;
+        return Z_STREAM_ERROR;
 
     /* check that we're writing and that there's no error */
     if (state->mode != GZ_WRITE || state->err != Z_OK)
-        return 0;
+        return Z_STREAM_ERROR;
 
     /* make sure we have some buffer space */
     if (state->size == 0 && gz_init(state) == -1)
-        return 0;
+        return state->error;
 
     /* check for seek request */
     if (state->seek) {
         state->seek = 0;
         if (gz_zero(state, state->skip) == -1)
-            return 0;
+            return state->error;
     }
 
-    /* consume whatever's left in the input buffer */
-    if (strm->avail_in && gz_comp(state, Z_NO_FLUSH) == -1)
-        return 0;
-
-    /* do the printf() into the input buffer, put length in len */
-    size = (int)(state->size);
-    state->in[size - 1] = 0;
+    /* do the printf() into the input buffer, put length in len -- the input
+       buffer is double-sized just for this function, so there is guaranteed to
+       be state->size bytes available after the current contents */
+    if (strm->avail_in == 0)
+        strm->next_in = state->in;
+    next = (char *)(strm->next_in + strm->avail_in);
+    next[state->size - 1] = 0;
 #ifdef NO_snprintf
 #  ifdef HAS_sprintf_void
-    sprintf((char *)(state->in), format, a1, a2, a3, a4, a5, a6, a7, a8,
-            a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
+    sprintf(next, format, a1, a2, a3, a4, a5, a6, a7, a8, a9, a10, a11, a12,
+            a13, a14, a15, a16, a17, a18, a19, a20);
     for (len = 0; len < size; len++)
-        if (state->in[len] == 0) break;
+        if (next[len] == 0)
+            break;
 #  else
-    len = sprintf((char *)(state->in), format, a1, a2, a3, a4, a5, a6, a7, a8,
-                  a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
+    len = sprintf(next, format, a1, a2, a3, a4, a5, a6, a7, a8, a9, a10, a11,
+                  a12, a13, a14, a15, a16, a17, a18, a19, a20);
 #  endif
 #else
 #  ifdef HAS_snprintf_void
-    snprintf((char *)(state->in), size, format, a1, a2, a3, a4, a5, a6, a7, a8,
-             a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
-    len = strlen((char *)(state->in));
+    snprintf(next, state->size, format, a1, a2, a3, a4, a5, a6, a7, a8, a9,
+             a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
+    len = strlen(next);
 #  else
-    len = snprintf((char *)(state->in), size, format, a1, a2, a3, a4, a5, a6,
-                   a7, a8, a9, a10, a11, a12, a13, a14, a15, a16, a17, a18,
-                   a19, a20);
+    len = snprintf(next, state->size, format, a1, a2, a3, a4, a5, a6, a7, a8,
+                   a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
 #  endif
 #endif
 
     /* check that printf() results fit in buffer */
-    if (len <= 0 || len >= (int)size || state->in[size - 1] != 0)
+    if (len == 0 || len >= state->size || next[state->size - 1] != 0)
         return 0;
 
-    /* update buffer and position, defer compression until needed */
-    strm->avail_in = (unsigned)len;
-    strm->next_in = state->in;
+    /* update buffer and position, compress first half if past that */
+    strm->avail_in += len;
     state->x.pos += len;
-    return len;
+    if (strm->avail_in >= state->size) {
+        left = strm->avail_in - state->size;
+        strm->avail_in = state->size;
+        if (gz_comp(state, Z_NO_FLUSH) == -1)
+            return state->err;
+        memcpy(state->in, state->in + state->size, left);
+        strm->next_in = state->in;
+        strm->avail_in = left;
+    }
+    return (int)len;
 }
 
 #endif
@@ -470,7 +558,7 @@ int ZEXPORT gzflush(file, flush)
 
     /* get internal structure */
     if (file == NULL)
-        return -1;
+        return Z_STREAM_ERROR;
     state = (gz_statep)file;
 
     /* check that we're writing and that there's no error */
@@ -485,11 +573,11 @@ int ZEXPORT gzflush(file, flush)
     if (state->seek) {
         state->seek = 0;
         if (gz_zero(state, state->skip) == -1)
-            return -1;
+            return state->err;
     }
 
     /* compress remaining data with requested flush */
-    gz_comp(state, flush);
+    (void)gz_comp(state, flush);
     return state->err;
 }
 
@@ -520,13 +608,13 @@ int ZEXPORT gzsetparams(file, level, strategy)
     if (state->seek) {
         state->seek = 0;
         if (gz_zero(state, state->skip) == -1)
-            return -1;
+            return state->err;
     }
 
     /* change compression parameters for subsequent input */
     if (state->size) {
         /* flush previous input with previous parameters before changing */
-        if (strm->avail_in && gz_comp(state, Z_PARTIAL_FLUSH) == -1)
+        if (strm->avail_in && gz_comp(state, Z_BLOCK) == -1)
             return state->err;
         deflateParams(strm, level, strategy);
     }
diff --git a/modules/zlib/src/infback.c b/modules/zlib/src/infback.c
index f3833c2e4..b93ef478e 100644
--- a/modules/zlib/src/infback.c
+++ b/modules/zlib/src/infback.c
@@ -1,5 +1,5 @@
 /* infback.c -- inflate using a call-back interface
- * Copyright (C) 1995-2011 Mark Adler
+ * Copyright (C) 1995-2016 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -61,7 +61,7 @@ int stream_size;
     Tracev((stderr, "inflate: allocated\n"));
     strm->state = (struct internal_state FAR *)state;
     state->dmax = 32768U;
-    state->wbits = windowBits;
+    state->wbits = (uInt)windowBits;
     state->wsize = 1U << windowBits;
     state->window = window;
     state->wnext = 0;
@@ -480,7 +480,8 @@ void FAR *out_desc;
 
         case LEN:
             /* use inflate_fast() if we have enough input and output */
-            if (have >= 6 && left >= 258) {
+            if (have >= INFLATE_FAST_MIN_HAVE &&
+                left >= INFLATE_FAST_MIN_LEFT) {
                 RESTORE();
                 if (state->whave < state->wsize)
                     state->whave = state->wsize - left;
diff --git a/modules/zlib/src/inffast.c b/modules/zlib/src/inffast.c
index bda59ceb6..66c0d0249 100644
--- a/modules/zlib/src/inffast.c
+++ b/modules/zlib/src/inffast.c
@@ -1,5 +1,5 @@
 /* inffast.c -- fast decoding
- * Copyright (C) 1995-2008, 2010, 2013 Mark Adler
+ * Copyright (C) 1995-2017 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -8,26 +8,9 @@
 #include "inflate.h"
 #include "inffast.h"
 
-#ifndef ASMINF
-
-/* Allow machine dependent optimization for post-increment or pre-increment.
-   Based on testing to date,
-   Pre-increment preferred for:
-   - PowerPC G3 (Adler)
-   - MIPS R5000 (Randers-Pehrson)
-   Post-increment preferred for:
-   - none
-   No measurable difference:
-   - Pentium III (Anderson)
-   - M68060 (Nikl)
- */
-#ifdef POSTINC
-#  define OFF 0
-#  define PUP(a) *(a)++
+#ifdef ASMINF
+#  pragma message("Assembler code may have bugs -- use at your own risk")
 #else
-#  define OFF 1
-#  define PUP(a) *++(a)
-#endif
 
 /*
    Decode literal, length, and distance codes and write out the resulting
@@ -40,8 +23,8 @@
    Entry assumptions:
 
         state->mode == LEN
-        strm->avail_in >= 6
-        strm->avail_out >= 258
+        strm->avail_in >= INFLATE_FAST_MIN_HAVE
+        strm->avail_out >= INFLATE_FAST_MIN_LEFT
         start >= strm->avail_out
         state->bits < 8
 
@@ -96,11 +79,11 @@ unsigned start;         /* inflate()'s starting value for strm->avail_out */
 
     /* copy state to local variables */
     state = (struct inflate_state FAR *)strm->state;
-    in = strm->next_in - OFF;
-    last = in + (strm->avail_in - 5);
-    out = strm->next_out - OFF;
+    in = strm->next_in;
+    last = in + (strm->avail_in - (INFLATE_FAST_MIN_HAVE - 1));
+    out = strm->next_out;
     beg = out - (start - strm->avail_out);
-    end = out + (strm->avail_out - 257);
+    end = out + (strm->avail_out - (INFLATE_FAST_MIN_LEFT - 1));
 #ifdef INFLATE_STRICT
     dmax = state->dmax;
 #endif
@@ -119,9 +102,9 @@ unsigned start;         /* inflate()'s starting value for strm->avail_out */
        input data or output space */
     do {
         if (bits < 15) {
-            hold += (unsigned long)(PUP(in)) << bits;
+            hold += (unsigned long)(*in++) << bits;
             bits += 8;
-            hold += (unsigned long)(PUP(in)) << bits;
+            hold += (unsigned long)(*in++) << bits;
             bits += 8;
         }
         here = lcode[hold & lmask];
@@ -134,14 +117,14 @@ unsigned start;         /* inflate()'s starting value for strm->avail_out */
             Tracevv((stderr, here.val >= 0x20 && here.val < 0x7f ?
                     "inflate:         literal '%c'\n" :
                     "inflate:         literal 0x%02x\n", here.val));
-            PUP(out) = (unsigned char)(here.val);
+            *out++ = (unsigned char)(here.val);
         }
         else if (op & 16) {                     /* length base */
             len = (unsigned)(here.val);
             op &= 15;                           /* number of extra bits */
             if (op) {
                 if (bits < op) {
-                    hold += (unsigned long)(PUP(in)) << bits;
+                    hold += (unsigned long)(*in++) << bits;
                     bits += 8;
                 }
                 len += (unsigned)hold & ((1U << op) - 1);
@@ -150,9 +133,9 @@ unsigned start;         /* inflate()'s starting value for strm->avail_out */
             }
             Tracevv((stderr, "inflate:         length %u\n", len));
             if (bits < 15) {
-                hold += (unsigned long)(PUP(in)) << bits;
+                hold += (unsigned long)(*in++) << bits;
                 bits += 8;
-                hold += (unsigned long)(PUP(in)) << bits;
+                hold += (unsigned long)(*in++) << bits;
                 bits += 8;
             }
             here = dcode[hold & dmask];
@@ -165,10 +148,10 @@ unsigned start;         /* inflate()'s starting value for strm->avail_out */
                 dist = (unsigned)(here.val);
                 op &= 15;                       /* number of extra bits */
                 if (bits < op) {
-                    hold += (unsigned long)(PUP(in)) << bits;
+                    hold += (unsigned long)(*in++) << bits;
                     bits += 8;
                     if (bits < op) {
-                        hold += (unsigned long)(PUP(in)) << bits;
+                        hold += (unsigned long)(*in++) << bits;
                         bits += 8;
                     }
                 }
@@ -196,30 +179,30 @@ unsigned start;         /* inflate()'s starting value for strm->avail_out */
 #ifdef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR
                         if (len <= op - whave) {
                             do {
-                                PUP(out) = 0;
+                                *out++ = 0;
                             } while (--len);
                             continue;
                         }
                         len -= op - whave;
                         do {
-                            PUP(out) = 0;
+                            *out++ = 0;
                         } while (--op > whave);
                         if (op == 0) {
                             from = out - dist;
                             do {
-                                PUP(out) = PUP(from);
+                                *out++ = *from++;
                             } while (--len);
                             continue;
                         }
 #endif
                     }
-                    from = window - OFF;
+                    from = window;
                     if (wnext == 0) {           /* very common case */
                         from += wsize - op;
                         if (op < len) {         /* some from window */
                             len -= op;
                             do {
-                                PUP(out) = PUP(from);
+                                *out++ = *from++;
                             } while (--op);
                             from = out - dist;  /* rest from output */
                         }
@@ -230,14 +213,14 @@ unsigned start;         /* inflate()'s starting value for strm->avail_out */
                         if (op < len) {         /* some from end of window */
                             len -= op;
                             do {
-                                PUP(out) = PUP(from);
+                                *out++ = *from++;
                             } while (--op);
-                            from = window - OFF;
+                            from = window;
                             if (wnext < len) {  /* some from start of window */
                                 op = wnext;
                                 len -= op;
                                 do {
-                                    PUP(out) = PUP(from);
+                                    *out++ = *from++;
                                 } while (--op);
                                 from = out - dist;      /* rest from output */
                             }
@@ -248,35 +231,35 @@ unsigned start;         /* inflate()'s starting value for strm->avail_out */
                         if (op < len) {         /* some from window */
                             len -= op;
                             do {
-                                PUP(out) = PUP(from);
+                                *out++ = *from++;
                             } while (--op);
                             from = out - dist;  /* rest from output */
                         }
                     }
                     while (len > 2) {
-                        PUP(out) = PUP(from);
-                        PUP(out) = PUP(from);
-                        PUP(out) = PUP(from);
+                        *out++ = *from++;
+                        *out++ = *from++;
+                        *out++ = *from++;
                         len -= 3;
                     }
                     if (len) {
-                        PUP(out) = PUP(from);
+                        *out++ = *from++;
                         if (len > 1)
-                            PUP(out) = PUP(from);
+                            *out++ = *from++;
                     }
                 }
                 else {
                     from = out - dist;          /* copy direct from output */
                     do {                        /* minimum length is three */
-                        PUP(out) = PUP(from);
-                        PUP(out) = PUP(from);
-                        PUP(out) = PUP(from);
+                        *out++ = *from++;
+                        *out++ = *from++;
+                        *out++ = *from++;
                         len -= 3;
                     } while (len > 2);
                     if (len) {
-                        PUP(out) = PUP(from);
+                        *out++ = *from++;
                         if (len > 1)
-                            PUP(out) = PUP(from);
+                            *out++ = *from++;
                     }
                 }
             }
@@ -313,11 +296,14 @@ unsigned start;         /* inflate()'s starting value for strm->avail_out */
     hold &= (1U << bits) - 1;
 
     /* update state and return */
-    strm->next_in = in + OFF;
-    strm->next_out = out + OFF;
-    strm->avail_in = (unsigned)(in < last ? 5 + (last - in) : 5 - (in - last));
+    strm->next_in = in;
+    strm->next_out = out;
+    strm->avail_in = (unsigned)(in < last ?
+        (INFLATE_FAST_MIN_HAVE - 1) + (last - in) :
+        (INFLATE_FAST_MIN_HAVE - 1) - (in - last));
     strm->avail_out = (unsigned)(out < end ?
-                                 257 + (end - out) : 257 - (out - end));
+        (INFLATE_FAST_MIN_LEFT - 1) + (end - out) :
+        (INFLATE_FAST_MIN_LEFT - 1) - (out - end));
     state->hold = hold;
     state->bits = bits;
     return;
diff --git a/modules/zlib/src/inffast.h b/modules/zlib/src/inffast.h
index e5c1aa4ca..ec9272aa0 100644
--- a/modules/zlib/src/inffast.h
+++ b/modules/zlib/src/inffast.h
@@ -8,4 +8,18 @@
    subject to change. Applications should only use zlib.h.
  */
 
+/* INFLATE_FAST_MIN_LEFT is the minimum number of output bytes that are left,
+   so that we can call inflate_fast safely with only one up front bounds check.
+   One length-distance code pair can copy up to 258 bytes.
+ */
+#define INFLATE_FAST_MIN_LEFT 258
+
+/* INFLATE_FAST_MIN_HAVE is the minimum number of input bytes that we have, so
+   that we can call inflate_fast safely with only one up front bounds check.
+   One length-distance code pair (as two Huffman encoded values of up to 15
+   bits each) plus any additional bits (up to 5 for length and 13 for distance)
+   can require reading up to 48 bits, or 6 bytes.
+ */
+#define INFLATE_FAST_MIN_HAVE 6
+
 void ZLIB_INTERNAL inflate_fast OF((z_streamp strm, unsigned start));
diff --git a/modules/zlib/src/inffast_chunk.c b/modules/zlib/src/inffast_chunk.c
new file mode 100644
index 000000000..a86cfea60
--- /dev/null
+++ b/modules/zlib/src/inffast_chunk.c
@@ -0,0 +1,318 @@
+/* inffast_chunk.c -- fast decoding
+ * Copyright (C) 1995-2017 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+#include "zutil.h"
+#include "inftrees.h"
+#include "inflate.h"
+#include "inffast_chunk.h"
+#include "chunkcopy.h"
+
+#ifdef ASMINF
+#  pragma message("Assembler code may have bugs -- use at your own risk")
+#else
+
+/*
+   Decode literal, length, and distance codes and write out the resulting
+   literal and match bytes until either not enough input or output is
+   available, an end-of-block is encountered, or a data error is encountered.
+   When large enough input and output buffers are supplied to inflate(), for
+   example, a 16K input buffer and a 64K output buffer, more than 95% of the
+   inflate() execution time is spent in this routine.
+
+   Entry assumptions:
+
+        state->mode == LEN
+        strm->avail_in >= INFLATE_FAST_MIN_INPUT (6 bytes)
+        strm->avail_out >= INFLATE_FAST_MIN_OUTPUT (258 bytes)
+        start >= strm->avail_out
+        state->bits < 8
+        strm->next_out[0..strm->avail_out] does not overlap with
+              strm->next_in[0..strm->avail_in]
+        strm->state->window is allocated with an additional
+              CHUNKCOPY_CHUNK_SIZE-1 bytes of padding beyond strm->state->wsize
+
+   On return, state->mode is one of:
+
+        LEN -- ran out of enough output space or enough available input
+        TYPE -- reached end of block code, inflate() to interpret next block
+        BAD -- error in block data
+
+   Notes:
+
+    INFLATE_FAST_MIN_INPUT 6 bytes
+
+    - The maximum input bits used by a length/distance pair is 15 bits for the
+      length code, 5 bits for the length extra, 15 bits for the distance code,
+      and 13 bits for the distance extra.  This totals 48 bits, or six bytes.
+      Therefore if strm->avail_in >= 6, then there is enough input to avoid
+      checking for available input while decoding.
+
+    INFLATE_FAST_MIN_OUTPUT 258 bytes
+
+    - The maximum bytes that a single length/distance pair can output is 258
+      bytes, which is the maximum length that can be coded.  inflate_fast()
+      requires strm->avail_out >= 258 for each loop to avoid checking for
+      available output space while decoding.
+ */
+void ZLIB_INTERNAL inflate_fast_chunk_(strm, start)
+z_streamp strm;
+unsigned start;         /* inflate()'s starting value for strm->avail_out */
+{
+    struct inflate_state FAR *state;
+    z_const unsigned char FAR *in;      /* local strm->next_in */
+    z_const unsigned char FAR *last;    /* have enough input while in < last */
+    unsigned char FAR *out;     /* local strm->next_out */
+    unsigned char FAR *beg;     /* inflate()'s initial strm->next_out */
+    unsigned char FAR *end;     /* while out < end, enough space available */
+    unsigned char FAR *limit;   /* safety limit for chunky copies */
+#ifdef INFLATE_STRICT
+    unsigned dmax;              /* maximum distance from zlib header */
+#endif
+    unsigned wsize;             /* window size or zero if not using window */
+    unsigned whave;             /* valid bytes in the window */
+    unsigned wnext;             /* window write index */
+    unsigned char FAR *window;  /* allocated sliding window, if wsize != 0 */
+    unsigned long hold;         /* local strm->hold */
+    unsigned bits;              /* local strm->bits */
+    code const FAR *lcode;      /* local strm->lencode */
+    code const FAR *dcode;      /* local strm->distcode */
+    unsigned lmask;             /* mask for first level of length codes */
+    unsigned dmask;             /* mask for first level of distance codes */
+    code here;                  /* retrieved table entry */
+    unsigned op;                /* code bits, operation, extra bits, or */
+                                /*  window position, window bytes to copy */
+    unsigned len;               /* match length, unused bytes */
+    unsigned dist;              /* match distance */
+    unsigned char FAR *from;    /* where to copy match from */
+
+    /* copy state to local variables */
+    state = (struct inflate_state FAR *)strm->state;
+    in = strm->next_in;
+    last = in + (strm->avail_in - (INFLATE_FAST_MIN_INPUT - 1));
+    out = strm->next_out;
+    beg = out - (start - strm->avail_out);
+    end = out + (strm->avail_out - (INFLATE_FAST_MIN_OUTPUT - 1));
+    limit = out + strm->avail_out;
+#ifdef INFLATE_STRICT
+    dmax = state->dmax;
+#endif
+    wsize = state->wsize;
+    whave = state->whave;
+    wnext = (state->wnext == 0 && whave >= wsize) ? wsize : state->wnext;
+    window = state->window;
+    hold = state->hold;
+    bits = state->bits;
+    lcode = state->lencode;
+    dcode = state->distcode;
+    lmask = (1U << state->lenbits) - 1;
+    dmask = (1U << state->distbits) - 1;
+
+    /* decode literals and length/distances until end-of-block or not enough
+       input data or output space */
+    do {
+        if (bits < 15) {
+            hold += (unsigned long)(*in++) << bits;
+            bits += 8;
+            hold += (unsigned long)(*in++) << bits;
+            bits += 8;
+        }
+        here = lcode[hold & lmask];
+      dolen:
+        op = (unsigned)(here.bits);
+        hold >>= op;
+        bits -= op;
+        op = (unsigned)(here.op);
+        if (op == 0) {                          /* literal */
+            Tracevv((stderr, here.val >= 0x20 && here.val < 0x7f ?
+                    "inflate:         literal '%c'\n" :
+                    "inflate:         literal 0x%02x\n", here.val));
+            *out++ = (unsigned char)(here.val);
+        }
+        else if (op & 16) {                     /* length base */
+            len = (unsigned)(here.val);
+            op &= 15;                           /* number of extra bits */
+            if (op) {
+                if (bits < op) {
+                    hold += (unsigned long)(*in++) << bits;
+                    bits += 8;
+                }
+                len += (unsigned)hold & ((1U << op) - 1);
+                hold >>= op;
+                bits -= op;
+            }
+            Tracevv((stderr, "inflate:         length %u\n", len));
+            if (bits < 15) {
+                hold += (unsigned long)(*in++) << bits;
+                bits += 8;
+                hold += (unsigned long)(*in++) << bits;
+                bits += 8;
+            }
+            here = dcode[hold & dmask];
+          dodist:
+            op = (unsigned)(here.bits);
+            hold >>= op;
+            bits -= op;
+            op = (unsigned)(here.op);
+            if (op & 16) {                      /* distance base */
+                dist = (unsigned)(here.val);
+                op &= 15;                       /* number of extra bits */
+                if (bits < op) {
+                    hold += (unsigned long)(*in++) << bits;
+                    bits += 8;
+                    if (bits < op) {
+                        hold += (unsigned long)(*in++) << bits;
+                        bits += 8;
+                    }
+                }
+                dist += (unsigned)hold & ((1U << op) - 1);
+#ifdef INFLATE_STRICT
+                if (dist > dmax) {
+                    strm->msg = (char *)"invalid distance too far back";
+                    state->mode = BAD;
+                    break;
+                }
+#endif
+                hold >>= op;
+                bits -= op;
+                Tracevv((stderr, "inflate:         distance %u\n", dist));
+                op = (unsigned)(out - beg);     /* max distance in output */
+                if (dist > op) {                /* see if copy from window */
+                    op = dist - op;             /* distance back in window */
+                    if (op > whave) {
+                        if (state->sane) {
+                            strm->msg =
+                                (char *)"invalid distance too far back";
+                            state->mode = BAD;
+                            break;
+                        }
+#ifdef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR
+                        if (len <= op - whave) {
+                            do {
+                                *out++ = 0;
+                            } while (--len);
+                            continue;
+                        }
+                        len -= op - whave;
+                        do {
+                            *out++ = 0;
+                        } while (--op > whave);
+                        if (op == 0) {
+                            from = out - dist;
+                            do {
+                                *out++ = *from++;
+                            } while (--len);
+                            continue;
+                        }
+#endif
+                    }
+                    from = window;
+                    if (wnext >= op) {          /* contiguous in window */
+                        from += wnext - op;
+                    }
+                    else {                      /* wrap around window */
+                        op -= wnext;
+                        from += wsize - op;
+                        if (op < len) {         /* some from end of window */
+                            len -= op;
+                            out = chunkcopy_safe(out, from, op, limit);
+                            from = window;      /* more from start of window */
+                            op = wnext;
+                            /* This (rare) case can create a situation where
+                               the first chunkcopy below must be checked.
+                             */
+                        }
+                    }
+                    if (op < len) {             /* still need some from output */
+                        out = chunkcopy_safe(out, from, op, limit);
+                        len -= op;
+                        /* When dist is small the amount of data that can be
+                           copied from the window is also small, and progress
+                           towards the dangerous end of the output buffer is
+                           also small.  This means that for trivial memsets and
+                           for chunkunroll_relaxed() a safety check is
+                           unnecessary.  However, these conditions may not be
+                           entered at all, and in that case it's possible that
+                           the main copy is near the end.
+                          */
+                        out = chunkunroll_relaxed(out, &dist, &len);
+                        out = chunkcopy_safe(out, out - dist, len, limit);
+                    } else {
+                        /* from points to window, so there is no risk of
+                           overlapping pointers requiring memset-like behaviour
+                         */
+                        out = chunkcopy_safe(out, from, len, limit);
+                    }
+                }
+                else {
+                    /* Whole reference is in range of current output.  No
+                       range checks are necessary because we start with room
+                       for at least 258 bytes of output, so unroll and roundoff
+                       operations can write beyond `out+len` so long as they
+                       stay within 258 bytes of `out`.
+                     */
+                    out = chunkcopy_lapped_relaxed(out, dist, len);
+                }
+            }
+            else if ((op & 64) == 0) {          /* 2nd level distance code */
+                here = dcode[here.val + (hold & ((1U << op) - 1))];
+                goto dodist;
+            }
+            else {
+                strm->msg = (char *)"invalid distance code";
+                state->mode = BAD;
+                break;
+            }
+        }
+        else if ((op & 64) == 0) {              /* 2nd level length code */
+            here = lcode[here.val + (hold & ((1U << op) - 1))];
+            goto dolen;
+        }
+        else if (op & 32) {                     /* end-of-block */
+            Tracevv((stderr, "inflate:         end of block\n"));
+            state->mode = TYPE;
+            break;
+        }
+        else {
+            strm->msg = (char *)"invalid literal/length code";
+            state->mode = BAD;
+            break;
+        }
+    } while (in < last && out < end);
+
+    /* return unused bytes (on entry, bits < 8, so in won't go too far back) */
+    len = bits >> 3;
+    in -= len;
+    bits -= len << 3;
+    hold &= (1U << bits) - 1;
+
+    /* update state and return */
+    strm->next_in = in;
+    strm->next_out = out;
+    strm->avail_in = (unsigned)(in < last ?
+        (INFLATE_FAST_MIN_INPUT - 1) + (last - in) :
+        (INFLATE_FAST_MIN_INPUT - 1) - (in - last));
+    strm->avail_out = (unsigned)(out < end ?
+        (INFLATE_FAST_MIN_OUTPUT - 1) + (end - out) :
+        (INFLATE_FAST_MIN_OUTPUT - 1) - (out - end));
+    state->hold = hold;
+    state->bits = bits;
+    return;
+}
+
+/*
+   inflate_fast() speedups that turned out slower (on a PowerPC G3 750CXe):
+   - Using bit fields for code structure
+   - Different op definition to avoid & for extra bits (do & for table bits)
+   - Three separate decoding do-loops for direct, window, and wnext == 0
+   - Special case for distance > 1 copies to do overlapped load and store copy
+   - Explicit branch predictions (based on measured branch probabilities)
+   - Deferring match copy and interspersed it with decoding subsequent codes
+   - Swapping literal/length else
+   - Swapping window/direct else
+   - Larger unrolled copy loops (three is about right)
+   - Moving len -= 3 statement into middle of loop
+ */
+
+#endif /* !ASMINF */
diff --git a/modules/zlib/src/inffast_chunk.h b/modules/zlib/src/inffast_chunk.h
new file mode 100644
index 000000000..5cd1eac35
--- /dev/null
+++ b/modules/zlib/src/inffast_chunk.h
@@ -0,0 +1,27 @@
+/* inffast_chunk.h -- header to use inffast_chunk.c
+ * Copyright (C) 1995-2003, 2010 Mark Adler
+ * Copyright (C) 2017 ARM, Inc.
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+   part of the implementation of the compression library and is
+   subject to change. Applications should only use zlib.h.
+ */
+
+/* INFLATE_FAST_MIN_INPUT: the minimum number of input bytes needed so that
+   we can safely call inflate_fast() with only one up-front bounds check. One
+   length/distance code pair (15 bits for the length code, 5 bits for length
+   extra, 15 bits for the distance code, 13 bits for distance extra) requires
+   reading up to 48 input bits (6 bytes).
+*/
+#define INFLATE_FAST_MIN_INPUT 6
+
+/* INFLATE_FAST_MIN_OUTPUT: the minimum number of output bytes needed so that
+   we can safely call inflate_fast() with only one up-front bounds check. One
+   length/distance code pair can output up to 258 bytes, which is the maximum
+   length that can be coded.
+ */
+#define INFLATE_FAST_MIN_OUTPUT 258
+
+void ZLIB_INTERNAL inflate_fast_chunk_ OF((z_streamp strm, unsigned start));
diff --git a/modules/zlib/src/inflate.c b/modules/zlib/src/inflate.c
index 4fd3f3c18..5c40cf1ee 100644
--- a/modules/zlib/src/inflate.c
+++ b/modules/zlib/src/inflate.c
@@ -1,5 +1,5 @@
 /* inflate.c -- zlib decompression
- * Copyright (C) 1995-2012 Mark Adler
+ * Copyright (C) 1995-2016 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -92,6 +92,7 @@
 #endif
 
 /* function prototypes */
+local int inflateStateCheck OF((z_streamp strm));
 local void fixedtables OF((struct inflate_state FAR *state));
 local int updatewindow OF((z_streamp strm, const unsigned char FAR *end,
                            unsigned copy));
@@ -101,12 +102,26 @@ local int updatewindow OF((z_streamp strm, const unsigned char FAR *end,
 local unsigned syncsearch OF((unsigned FAR *have, const unsigned char FAR *buf,
                               unsigned len));
 
+local int inflateStateCheck(strm)
+z_streamp strm;
+{
+    struct inflate_state FAR *state;
+    if (strm == Z_NULL ||
+        strm->zalloc == (alloc_func)0 || strm->zfree == (free_func)0)
+        return 1;
+    state = (struct inflate_state FAR *)strm->state;
+    if (state == Z_NULL || state->strm != strm ||
+        state->mode < HEAD || state->mode > SYNC)
+        return 1;
+    return 0;
+}
+
 int ZEXPORT inflateResetKeep(strm)
 z_streamp strm;
 {
     struct inflate_state FAR *state;
 
-    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+    if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
     state = (struct inflate_state FAR *)strm->state;
     strm->total_in = strm->total_out = state->total = 0;
     strm->msg = Z_NULL;
@@ -131,7 +146,7 @@ z_streamp strm;
 {
     struct inflate_state FAR *state;
 
-    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+    if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
     state = (struct inflate_state FAR *)strm->state;
     state->wsize = 0;
     state->whave = 0;
@@ -147,7 +162,7 @@ int windowBits;
     struct inflate_state FAR *state;
 
     /* get the state */
-    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+    if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
     state = (struct inflate_state FAR *)strm->state;
 
     /* extract wrap request from windowBits parameter */
@@ -156,7 +171,7 @@ int windowBits;
         windowBits = -windowBits;
     }
     else {
-        wrap = (windowBits >> 4) + 1;
+        wrap = (windowBits >> 4) + 5;
 #ifdef GUNZIP
         if (windowBits < 48)
             windowBits &= 15;
@@ -210,7 +225,10 @@ int stream_size;
     if (state == Z_NULL) return Z_MEM_ERROR;
     Tracev((stderr, "inflate: allocated\n"));
     strm->state = (struct internal_state FAR *)state;
+    state->strm = strm;
     state->window = Z_NULL;
+    state->mode = HEAD;     /* to pass state test in inflateReset2() */
+    state->check = 1L;      /* 1L is the result of adler32() zero length data */
     ret = inflateReset2(strm, windowBits);
     if (ret != Z_OK) {
         ZFREE(strm, state);
@@ -234,17 +252,17 @@ int value;
 {
     struct inflate_state FAR *state;
 
-    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+    if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
     state = (struct inflate_state FAR *)strm->state;
     if (bits < 0) {
         state->hold = 0;
         state->bits = 0;
         return Z_OK;
     }
-    if (bits > 16 || state->bits + bits > 32) return Z_STREAM_ERROR;
+    if (bits > 16 || state->bits + (uInt)bits > 32) return Z_STREAM_ERROR;
     value &= (1L << bits) - 1;
-    state->hold += value << state->bits;
-    state->bits += bits;
+    state->hold += (unsigned)value << state->bits;
+    state->bits += (uInt)bits;
     return Z_OK;
 }
 
@@ -625,7 +643,7 @@ int flush;
     static const unsigned short order[19] = /* permutation of code lengths */
         {16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15};
 
-    if (strm == Z_NULL || strm->state == Z_NULL || strm->next_out == Z_NULL ||
+    if (inflateStateCheck(strm) || strm->next_out == Z_NULL ||
         (strm->next_in == Z_NULL && strm->avail_in != 0))
         return Z_STREAM_ERROR;
 
@@ -645,6 +663,8 @@ int flush;
             NEEDBITS(16);
 #ifdef GUNZIP
             if ((state->wrap & 2) && hold == 0x8b1f) {  /* gzip header */
+                if (state->wbits == 0)
+                    state->wbits = 15;
                 state->check = crc32(0L, Z_NULL, 0);
                 CRC2(state->check, hold);
                 INITBITS();
@@ -672,7 +692,7 @@ int flush;
             len = BITS(4) + 8;
             if (state->wbits == 0)
                 state->wbits = len;
-            else if (len > state->wbits) {
+            if (len > 15 || len > state->wbits) {
                 strm->msg = (char *)"invalid window size";
                 state->mode = BAD;
                 break;
@@ -699,14 +719,16 @@ int flush;
             }
             if (state->head != Z_NULL)
                 state->head->text = (int)((hold >> 8) & 1);
-            if (state->flags & 0x0200) CRC2(state->check, hold);
+            if ((state->flags & 0x0200) && (state->wrap & 4))
+                CRC2(state->check, hold);
             INITBITS();
             state->mode = TIME;
         case TIME:
             NEEDBITS(32);
             if (state->head != Z_NULL)
                 state->head->time = hold;
-            if (state->flags & 0x0200) CRC4(state->check, hold);
+            if ((state->flags & 0x0200) && (state->wrap & 4))
+                CRC4(state->check, hold);
             INITBITS();
             state->mode = OS;
         case OS:
@@ -715,7 +737,8 @@ int flush;
                 state->head->xflags = (int)(hold & 0xff);
                 state->head->os = (int)(hold >> 8);
             }
-            if (state->flags & 0x0200) CRC2(state->check, hold);
+            if ((state->flags & 0x0200) && (state->wrap & 4))
+                CRC2(state->check, hold);
             INITBITS();
             state->mode = EXLEN;
         case EXLEN:
@@ -724,7 +747,8 @@ int flush;
                 state->length = (unsigned)(hold);
                 if (state->head != Z_NULL)
                     state->head->extra_len = (unsigned)hold;
-                if (state->flags & 0x0200) CRC2(state->check, hold);
+                if ((state->flags & 0x0200) && (state->wrap & 4))
+                    CRC2(state->check, hold);
                 INITBITS();
             }
             else if (state->head != Z_NULL)
@@ -742,7 +766,7 @@ int flush;
                                 len + copy > state->head->extra_max ?
                                 state->head->extra_max - len : copy);
                     }
-                    if (state->flags & 0x0200)
+                    if ((state->flags & 0x0200) && (state->wrap & 4))
                         state->check = crc32(state->check, next, copy);
                     have -= copy;
                     next += copy;
@@ -761,9 +785,9 @@ int flush;
                     if (state->head != Z_NULL &&
                             state->head->name != Z_NULL &&
                             state->length < state->head->name_max)
-                        state->head->name[state->length++] = len;
+                        state->head->name[state->length++] = (Bytef)len;
                 } while (len && copy < have);
-                if (state->flags & 0x0200)
+                if ((state->flags & 0x0200) && (state->wrap & 4))
                     state->check = crc32(state->check, next, copy);
                 have -= copy;
                 next += copy;
@@ -782,9 +806,9 @@ int flush;
                     if (state->head != Z_NULL &&
                             state->head->comment != Z_NULL &&
                             state->length < state->head->comm_max)
-                        state->head->comment[state->length++] = len;
+                        state->head->comment[state->length++] = (Bytef)len;
                 } while (len && copy < have);
-                if (state->flags & 0x0200)
+                if ((state->flags & 0x0200) && (state->wrap & 4))
                     state->check = crc32(state->check, next, copy);
                 have -= copy;
                 next += copy;
@@ -796,7 +820,7 @@ int flush;
         case HCRC:
             if (state->flags & 0x0200) {
                 NEEDBITS(16);
-                if (hold != (state->check & 0xffff)) {
+                if ((state->wrap & 4) && hold != (state->check & 0xffff)) {
                     strm->msg = (char *)"header crc mismatch";
                     state->mode = BAD;
                     break;
@@ -1019,7 +1043,8 @@ int flush;
         case LEN_:
             state->mode = LEN;
         case LEN:
-            if (have >= 6 && left >= 258) {
+            if (have >= INFLATE_FAST_MIN_HAVE &&
+                left >= INFLATE_FAST_MIN_LEFT) {
                 RESTORE();
                 inflate_fast(strm, out);
                 LOAD();
@@ -1177,11 +1202,11 @@ int flush;
                 out -= left;
                 strm->total_out += out;
                 state->total += out;
-                if (out)
+                if ((state->wrap & 4) && out)
                     strm->adler = state->check =
                         UPDATE(state->check, put - out, out);
                 out = left;
-                if ((
+                if ((state->wrap & 4) && (
 #ifdef GUNZIP
                      state->flags ? hold :
 #endif
@@ -1240,10 +1265,10 @@ int flush;
     strm->total_in += in;
     strm->total_out += out;
     state->total += out;
-    if (state->wrap && out)
+    if ((state->wrap & 4) && out)
         strm->adler = state->check =
             UPDATE(state->check, strm->next_out - out, out);
-    strm->data_type = state->bits + (state->last ? 64 : 0) +
+    strm->data_type = (int)state->bits + (state->last ? 64 : 0) +
                       (state->mode == TYPE ? 128 : 0) +
                       (state->mode == LEN_ || state->mode == COPY_ ? 256 : 0);
     if (((in == 0 && out == 0) || flush == Z_FINISH) && ret == Z_OK)
@@ -1255,7 +1280,7 @@ int ZEXPORT inflateEnd(strm)
 z_streamp strm;
 {
     struct inflate_state FAR *state;
-    if (strm == Z_NULL || strm->state == Z_NULL || strm->zfree == (free_func)0)
+    if (inflateStateCheck(strm))
         return Z_STREAM_ERROR;
     state = (struct inflate_state FAR *)strm->state;
     if (state->window != Z_NULL) ZFREE(strm, state->window);
@@ -1273,7 +1298,7 @@ uInt *dictLength;
     struct inflate_state FAR *state;
 
     /* check state */
-    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+    if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
     state = (struct inflate_state FAR *)strm->state;
 
     /* copy dictionary */
@@ -1298,7 +1323,7 @@ uInt dictLength;
     int ret;
 
     /* check state */
-    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+    if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
     state = (struct inflate_state FAR *)strm->state;
     if (state->wrap != 0 && state->mode != DICT)
         return Z_STREAM_ERROR;
@@ -1330,7 +1355,7 @@ gz_headerp head;
     struct inflate_state FAR *state;
 
     /* check state */
-    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+    if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
     state = (struct inflate_state FAR *)strm->state;
     if ((state->wrap & 2) == 0) return Z_STREAM_ERROR;
 
@@ -1383,7 +1408,7 @@ z_streamp strm;
     struct inflate_state FAR *state;
 
     /* check parameters */
-    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+    if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
     state = (struct inflate_state FAR *)strm->state;
     if (strm->avail_in == 0 && state->bits < 8) return Z_BUF_ERROR;
 
@@ -1430,7 +1455,7 @@ z_streamp strm;
 {
     struct inflate_state FAR *state;
 
-    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+    if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
     state = (struct inflate_state FAR *)strm->state;
     return state->mode == STORED && state->bits == 0;
 }
@@ -1445,8 +1470,7 @@ z_streamp source;
     unsigned wsize;
 
     /* check input */
-    if (dest == Z_NULL || source == Z_NULL || source->state == Z_NULL ||
-        source->zalloc == (alloc_func)0 || source->zfree == (free_func)0)
+    if (inflateStateCheck(source) || dest == Z_NULL)
         return Z_STREAM_ERROR;
     state = (struct inflate_state FAR *)source->state;
 
@@ -1467,6 +1491,7 @@ z_streamp source;
     /* copy state */
     zmemcpy((voidpf)dest, (voidpf)source, sizeof(z_stream));
     zmemcpy((voidpf)copy, (voidpf)state, sizeof(struct inflate_state));
+    copy->strm = dest;
     if (state->lencode >= state->codes &&
         state->lencode <= state->codes + ENOUGH - 1) {
         copy->lencode = copy->codes + (state->lencode - state->codes);
@@ -1488,26 +1513,51 @@ int subvert;
 {
     struct inflate_state FAR *state;
 
-    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+    if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
     state = (struct inflate_state FAR *)strm->state;
-    state->sane = !subvert;
 #ifdef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR
+    state->sane = !subvert;
     return Z_OK;
 #else
+    (void)subvert;
     state->sane = 1;
     return Z_DATA_ERROR;
 #endif
 }
 
+int ZEXPORT inflateValidate(strm, check)
+z_streamp strm;
+int check;
+{
+    struct inflate_state FAR *state;
+
+    if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
+    state = (struct inflate_state FAR *)strm->state;
+    if (check)
+        state->wrap |= 4;
+    else
+        state->wrap &= ~4;
+    return Z_OK;
+}
+
 long ZEXPORT inflateMark(strm)
 z_streamp strm;
 {
     struct inflate_state FAR *state;
 
-    if (strm == Z_NULL || strm->state == Z_NULL)
-        return (long)(((unsigned long)0 - 1) << 16);
+    if (inflateStateCheck(strm))
+        return -(1L << 16);
     state = (struct inflate_state FAR *)strm->state;
     return (long)(((unsigned long)((long)state->back)) << 16) +
         (state->mode == COPY ? state->length :
             (state->mode == MATCH ? state->was - state->length : 0));
 }
+
+unsigned long ZEXPORT inflateCodesUsed(strm)
+z_streamp strm;
+{
+    struct inflate_state FAR *state;
+    if (inflateStateCheck(strm)) return (unsigned long)-1;
+    state = (struct inflate_state FAR *)strm->state;
+    return (unsigned long)(state->next - state->codes);
+}
diff --git a/modules/zlib/src/inflate.h b/modules/zlib/src/inflate.h
index 95f4986d4..a46cce6b6 100644
--- a/modules/zlib/src/inflate.h
+++ b/modules/zlib/src/inflate.h
@@ -1,5 +1,5 @@
 /* inflate.h -- internal inflate state definition
- * Copyright (C) 1995-2009 Mark Adler
+ * Copyright (C) 1995-2016 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -18,7 +18,7 @@
 
 /* Possible inflate modes between inflate() calls */
 typedef enum {
-    HEAD,       /* i: waiting for magic header */
+    HEAD = 16180,   /* i: waiting for magic header */
     FLAGS,      /* i: waiting for method and flags (gzip) */
     TIME,       /* i: waiting for modification time (gzip) */
     OS,         /* i: waiting for extra flags and operating system (gzip) */
@@ -77,11 +77,14 @@ typedef enum {
         CHECK -> LENGTH -> DONE
  */
 
-/* state maintained between inflate() calls.  Approximately 10K bytes. */
+/* State maintained between inflate() calls -- approximately 7K bytes, not
+   including the allocated sliding window, which is up to 32K bytes. */
 struct inflate_state {
+    z_streamp strm;             /* pointer back to this zlib stream */
     inflate_mode mode;          /* current inflate mode */
     int last;                   /* true if processing last block */
-    int wrap;                   /* bit 0 true for zlib, bit 1 true for gzip */
+    int wrap;                   /* bit 0 true for zlib, bit 1 true for gzip,
+                                   bit 2 true to validate check value */
     int havedict;               /* true if dictionary provided */
     int flags;                  /* gzip header method and flags (0 if zlib) */
     unsigned dmax;              /* zlib header max distance (INFLATE_STRICT) */
diff --git a/modules/zlib/src/inflate_simd.c b/modules/zlib/src/inflate_simd.c
new file mode 100644
index 000000000..490688974
--- /dev/null
+++ b/modules/zlib/src/inflate_simd.c
@@ -0,0 +1,1583 @@
+/* inflate.c -- zlib decompression
+ * Copyright (C) 1995-2016 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/*
+ * Change history:
+ *
+ * 1.2.beta0    24 Nov 2002
+ * - First version -- complete rewrite of inflate to simplify code, avoid
+ *   creation of window when not needed, minimize use of window when it is
+ *   needed, make inffast.c even faster, implement gzip decoding, and to
+ *   improve code readability and style over the previous zlib inflate code
+ *
+ * 1.2.beta1    25 Nov 2002
+ * - Use pointers for available input and output checking in inffast.c
+ * - Remove input and output counters in inffast.c
+ * - Change inffast.c entry and loop from avail_in >= 7 to >= 6
+ * - Remove unnecessary second byte pull from length extra in inffast.c
+ * - Unroll direct copy to three copies per loop in inffast.c
+ *
+ * 1.2.beta2    4 Dec 2002
+ * - Change external routine names to reduce potential conflicts
+ * - Correct filename to inffixed.h for fixed tables in inflate.c
+ * - Make hbuf[] unsigned char to match parameter type in inflate.c
+ * - Change strm->next_out[-state->offset] to *(strm->next_out - state->offset)
+ *   to avoid negation problem on Alphas (64 bit) in inflate.c
+ *
+ * 1.2.beta3    22 Dec 2002
+ * - Add comments on state->bits assertion in inffast.c
+ * - Add comments on op field in inftrees.h
+ * - Fix bug in reuse of allocated window after inflateReset()
+ * - Remove bit fields--back to byte structure for speed
+ * - Remove distance extra == 0 check in inflate_fast()--only helps for lengths
+ * - Change post-increments to pre-increments in inflate_fast(), PPC biased?
+ * - Add compile time option, POSTINC, to use post-increments instead (Intel?)
+ * - Make MATCH copy in inflate() much faster for when inflate_fast() not used
+ * - Use local copies of stream next and avail values, as well as local bit
+ *   buffer and bit count in inflate()--for speed when inflate_fast() not used
+ *
+ * 1.2.beta4    1 Jan 2003
+ * - Split ptr - 257 statements in inflate_table() to avoid compiler warnings
+ * - Move a comment on output buffer sizes from inffast.c to inflate.c
+ * - Add comments in inffast.c to introduce the inflate_fast() routine
+ * - Rearrange window copies in inflate_fast() for speed and simplification
+ * - Unroll last copy for window match in inflate_fast()
+ * - Use local copies of window variables in inflate_fast() for speed
+ * - Pull out common wnext == 0 case for speed in inflate_fast()
+ * - Make op and len in inflate_fast() unsigned for consistency
+ * - Add FAR to lcode and dcode declarations in inflate_fast()
+ * - Simplified bad distance check in inflate_fast()
+ * - Added inflateBackInit(), inflateBack(), and inflateBackEnd() in new
+ *   source file infback.c to provide a call-back interface to inflate for
+ *   programs like gzip and unzip -- uses window as output buffer to avoid
+ *   window copying
+ *
+ * 1.2.beta5    1 Jan 2003
+ * - Improved inflateBack() interface to allow the caller to provide initial
+ *   input in strm.
+ * - Fixed stored blocks bug in inflateBack()
+ *
+ * 1.2.beta6    4 Jan 2003
+ * - Added comments in inffast.c on effectiveness of POSTINC
+ * - Typecasting all around to reduce compiler warnings
+ * - Changed loops from while (1) or do {} while (1) to for (;;), again to
+ *   make compilers happy
+ * - Changed type of window in inflateBackInit() to unsigned char *
+ *
+ * 1.2.beta7    27 Jan 2003
+ * - Changed many types to unsigned or unsigned short to avoid warnings
+ * - Added inflateCopy() function
+ *
+ * 1.2.0        9 Mar 2003
+ * - Changed inflateBack() interface to provide separate opaque descriptors
+ *   for the in() and out() functions
+ * - Changed inflateBack() argument and in_func typedef to swap the length
+ *   and buffer address return values for the input function
+ * - Check next_in and next_out for Z_NULL on entry to inflate()
+ *
+ * The history for versions after 1.2.0 are in ChangeLog in zlib distribution.
+ */
+
+#include "zutil.h"
+#include "inftrees.h"
+#include "inflate.h"
+#include "inffast_chunk.h"
+#include "chunkcopy.h"
+
+#ifdef MAKEFIXED
+#  ifndef BUILDFIXED
+#    define BUILDFIXED
+#  endif
+#endif
+
+/* function prototypes */
+local int inflateStateCheck OF((z_streamp strm));
+local void fixedtables OF((struct inflate_state FAR *state));
+local int updatewindow OF((z_streamp strm, const unsigned char FAR *end,
+                           unsigned copy));
+#ifdef BUILDFIXED
+   void makefixed OF((void));
+#endif
+local unsigned syncsearch OF((unsigned FAR *have, const unsigned char FAR *buf,
+                              unsigned len));
+
+local int inflateStateCheck(strm)
+z_streamp strm;
+{
+    struct inflate_state FAR *state;
+    if (strm == Z_NULL ||
+        strm->zalloc == (alloc_func)0 || strm->zfree == (free_func)0)
+        return 1;
+    state = (struct inflate_state FAR *)strm->state;
+    if (state == Z_NULL || state->strm != strm ||
+        state->mode < HEAD || state->mode > SYNC)
+        return 1;
+    return 0;
+}
+
+int ZEXPORT inflateResetKeep(strm)
+z_streamp strm;
+{
+    struct inflate_state FAR *state;
+
+    if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
+    state = (struct inflate_state FAR *)strm->state;
+    strm->total_in = strm->total_out = state->total = 0;
+    strm->msg = Z_NULL;
+    if (state->wrap)        /* to support ill-conceived Java test suite */
+        strm->adler = state->wrap & 1;
+    state->mode = HEAD;
+    state->last = 0;
+    state->havedict = 0;
+    state->dmax = 32768U;
+    state->head = Z_NULL;
+    state->hold = 0;
+    state->bits = 0;
+    state->lencode = state->distcode = state->next = state->codes;
+    state->sane = 1;
+    state->back = -1;
+    Tracev((stderr, "inflate: reset\n"));
+    return Z_OK;
+}
+
+int ZEXPORT inflateReset(strm)
+z_streamp strm;
+{
+    struct inflate_state FAR *state;
+
+    if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
+    state = (struct inflate_state FAR *)strm->state;
+    state->wsize = 0;
+    state->whave = 0;
+    state->wnext = 0;
+    return inflateResetKeep(strm);
+}
+
+int ZEXPORT inflateReset2(strm, windowBits)
+z_streamp strm;
+int windowBits;
+{
+    int wrap;
+    struct inflate_state FAR *state;
+
+    /* get the state */
+    if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
+    state = (struct inflate_state FAR *)strm->state;
+
+    /* extract wrap request from windowBits parameter */
+    if (windowBits < 0) {
+        wrap = 0;
+        windowBits = -windowBits;
+    }
+    else {
+        wrap = (windowBits >> 4) + 5;
+#ifdef GUNZIP
+        if (windowBits < 48)
+            windowBits &= 15;
+#endif
+    }
+
+    /* set number of window bits, free window if different */
+    if (windowBits && (windowBits < 8 || windowBits > 15))
+        return Z_STREAM_ERROR;
+    if (state->window != Z_NULL && state->wbits != (unsigned)windowBits) {
+        ZFREE(strm, state->window);
+        state->window = Z_NULL;
+    }
+
+    /* update state and reset the rest of it */
+    state->wrap = wrap;
+    state->wbits = (unsigned)windowBits;
+    return inflateReset(strm);
+}
+
+int ZEXPORT inflateInit2_(strm, windowBits, version, stream_size)
+z_streamp strm;
+int windowBits;
+const char *version;
+int stream_size;
+{
+    int ret;
+    struct inflate_state FAR *state;
+
+    if (version == Z_NULL || version[0] != ZLIB_VERSION[0] ||
+        stream_size != (int)(sizeof(z_stream)))
+        return Z_VERSION_ERROR;
+    if (strm == Z_NULL) return Z_STREAM_ERROR;
+    strm->msg = Z_NULL;                 /* in case we return an error */
+    if (strm->zalloc == (alloc_func)0) {
+#ifdef Z_SOLO
+        return Z_STREAM_ERROR;
+#else
+        strm->zalloc = zcalloc;
+        strm->opaque = (voidpf)0;
+#endif
+    }
+    if (strm->zfree == (free_func)0)
+#ifdef Z_SOLO
+        return Z_STREAM_ERROR;
+#else
+        strm->zfree = zcfree;
+#endif
+    state = (struct inflate_state FAR *)
+            ZALLOC(strm, 1, sizeof(struct inflate_state));
+    if (state == Z_NULL) return Z_MEM_ERROR;
+    Tracev((stderr, "inflate: allocated\n"));
+    strm->state = (struct internal_state FAR *)state;
+    state->strm = strm;
+    state->window = Z_NULL;
+    state->mode = HEAD;     /* to pass state test in inflateReset2() */
+    state->check = 1L;      /* 1L is the result of adler32() zero length data */
+    ret = inflateReset2(strm, windowBits);
+    if (ret != Z_OK) {
+        ZFREE(strm, state);
+        strm->state = Z_NULL;
+    }
+    return ret;
+}
+
+int ZEXPORT inflateInit_(strm, version, stream_size)
+z_streamp strm;
+const char *version;
+int stream_size;
+{
+    return inflateInit2_(strm, DEF_WBITS, version, stream_size);
+}
+
+int ZEXPORT inflatePrime(strm, bits, value)
+z_streamp strm;
+int bits;
+int value;
+{
+    struct inflate_state FAR *state;
+
+    if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
+    state = (struct inflate_state FAR *)strm->state;
+    if (bits < 0) {
+        state->hold = 0;
+        state->bits = 0;
+        return Z_OK;
+    }
+    if (bits > 16 || state->bits + (uInt)bits > 32) return Z_STREAM_ERROR;
+    value &= (1L << bits) - 1;
+    state->hold += (unsigned)value << state->bits;
+    state->bits += (uInt)bits;
+    return Z_OK;
+}
+
+/*
+   Return state with length and distance decoding tables and index sizes set to
+   fixed code decoding.  Normally this returns fixed tables from inffixed.h.
+   If BUILDFIXED is defined, then instead this routine builds the tables the
+   first time it's called, and returns those tables the first time and
+   thereafter.  This reduces the size of the code by about 2K bytes, in
+   exchange for a little execution time.  However, BUILDFIXED should not be
+   used for threaded applications, since the rewriting of the tables and virgin
+   may not be thread-safe.
+ */
+local void fixedtables(state)
+struct inflate_state FAR *state;
+{
+#ifdef BUILDFIXED
+    static int virgin = 1;
+    static code *lenfix, *distfix;
+    static code fixed[544];
+
+    /* build fixed huffman tables if first call (may not be thread safe) */
+    if (virgin) {
+        unsigned sym, bits;
+        static code *next;
+
+        /* literal/length table */
+        sym = 0;
+        while (sym < 144) state->lens[sym++] = 8;
+        while (sym < 256) state->lens[sym++] = 9;
+        while (sym < 280) state->lens[sym++] = 7;
+        while (sym < 288) state->lens[sym++] = 8;
+        next = fixed;
+        lenfix = next;
+        bits = 9;
+        inflate_table(LENS, state->lens, 288, &(next), &(bits), state->work);
+
+        /* distance table */
+        sym = 0;
+        while (sym < 32) state->lens[sym++] = 5;
+        distfix = next;
+        bits = 5;
+        inflate_table(DISTS, state->lens, 32, &(next), &(bits), state->work);
+
+        /* do this just once */
+        virgin = 0;
+    }
+#else /* !BUILDFIXED */
+#   include "inffixed.h"
+#endif /* BUILDFIXED */
+    state->lencode = lenfix;
+    state->lenbits = 9;
+    state->distcode = distfix;
+    state->distbits = 5;
+}
+
+#ifdef MAKEFIXED
+#include <stdio.h>
+
+/*
+   Write out the inffixed.h that is #include'd above.  Defining MAKEFIXED also
+   defines BUILDFIXED, so the tables are built on the fly.  makefixed() writes
+   those tables to stdout, which would be piped to inffixed.h.  A small program
+   can simply call makefixed to do this:
+
+    void makefixed(void);
+
+    int main(void)
+    {
+        makefixed();
+        return 0;
+    }
+
+   Then that can be linked with zlib built with MAKEFIXED defined and run:
+
+    a.out > inffixed.h
+ */
+void makefixed()
+{
+    unsigned low, size;
+    struct inflate_state state;
+
+    fixedtables(&state);
+    puts("    /* inffixed.h -- table for decoding fixed codes");
+    puts("     * Generated automatically by makefixed().");
+    puts("     */");
+    puts("");
+    puts("    /* WARNING: this file should *not* be used by applications.");
+    puts("       It is part of the implementation of this library and is");
+    puts("       subject to change. Applications should only use zlib.h.");
+    puts("     */");
+    puts("");
+    size = 1U << 9;
+    printf("    static const code lenfix[%u] = {", size);
+    low = 0;
+    for (;;) {
+        if ((low % 7) == 0) printf("\n        ");
+        printf("{%u,%u,%d}", (low & 127) == 99 ? 64 : state.lencode[low].op,
+               state.lencode[low].bits, state.lencode[low].val);
+        if (++low == size) break;
+        putchar(',');
+    }
+    puts("\n    };");
+    size = 1U << 5;
+    printf("\n    static const code distfix[%u] = {", size);
+    low = 0;
+    for (;;) {
+        if ((low % 6) == 0) printf("\n        ");
+        printf("{%u,%u,%d}", state.distcode[low].op, state.distcode[low].bits,
+               state.distcode[low].val);
+        if (++low == size) break;
+        putchar(',');
+    }
+    puts("\n    };");
+}
+#endif /* MAKEFIXED */
+
+/*
+   Update the window with the last wsize (normally 32K) bytes written before
+   returning.  If window does not exist yet, create it.  This is only called
+   when a window is already in use, or when output has been written during this
+   inflate call, but the end of the deflate stream has not been reached yet.
+   It is also called to create a window for dictionary data when a dictionary
+   is loaded.
+
+   Providing output buffers larger than 32K to inflate() should provide a speed
+   advantage, since only the last 32K of output is copied to the sliding window
+   upon return from inflate(), and since all distances after the first 32K of
+   output will fall in the output data, making match copies simpler and faster.
+   The advantage may be dependent on the size of the processor's data caches.
+ */
+local int updatewindow(strm, end, copy)
+z_streamp strm;
+const Bytef *end;
+unsigned copy;
+{
+    struct inflate_state FAR *state;
+    unsigned dist;
+
+    state = (struct inflate_state FAR *)strm->state;
+
+    /* if it hasn't been done already, allocate space for the window */
+    if (state->window == Z_NULL) {
+        unsigned wsize = 1U << state->wbits;
+        state->window = (unsigned char FAR *)
+                        ZALLOC(strm, wsize + CHUNKCOPY_CHUNK_SIZE,
+                               sizeof(unsigned char));
+        if (state->window == Z_NULL) return 1;
+#ifdef INFLATE_CLEAR_UNUSED_UNDEFINED
+        /* Copies from the overflow portion of this buffer are undefined and
+           may cause analysis tools to raise a warning if we don't initialize
+           it.  However, this undefined data overwrites other undefined data
+           and is subsequently either overwritten or left deliberately
+           undefined at the end of decode; so there's really no point.
+         */
+        zmemzero(state->window + wsize, CHUNKCOPY_CHUNK_SIZE);
+#endif
+    }
+
+    /* if window not in use yet, initialize */
+    if (state->wsize == 0) {
+        state->wsize = 1U << state->wbits;
+        state->wnext = 0;
+        state->whave = 0;
+    }
+
+    /* copy state->wsize or less output bytes into the circular window */
+    if (copy >= state->wsize) {
+        zmemcpy(state->window, end - state->wsize, state->wsize);
+        state->wnext = 0;
+        state->whave = state->wsize;
+    }
+    else {
+        dist = state->wsize - state->wnext;
+        if (dist > copy) dist = copy;
+        zmemcpy(state->window + state->wnext, end - copy, dist);
+        copy -= dist;
+        if (copy) {
+            zmemcpy(state->window, end - copy, copy);
+            state->wnext = copy;
+            state->whave = state->wsize;
+        }
+        else {
+            state->wnext += dist;
+            if (state->wnext == state->wsize) state->wnext = 0;
+            if (state->whave < state->wsize) state->whave += dist;
+        }
+    }
+    return 0;
+}
+
+/* Macros for inflate(): */
+
+/* check function to use adler32() for zlib or crc32() for gzip */
+#ifdef GUNZIP
+#  define UPDATE(check, buf, len) \
+    (state->flags ? crc32(check, buf, len) : adler32(check, buf, len))
+#else
+#  define UPDATE(check, buf, len) adler32(check, buf, len)
+#endif
+
+/* check macros for header crc */
+#ifdef GUNZIP
+#  define CRC2(check, word) \
+    do { \
+        hbuf[0] = (unsigned char)(word); \
+        hbuf[1] = (unsigned char)((word) >> 8); \
+        check = crc32(check, hbuf, 2); \
+    } while (0)
+
+#  define CRC4(check, word) \
+    do { \
+        hbuf[0] = (unsigned char)(word); \
+        hbuf[1] = (unsigned char)((word) >> 8); \
+        hbuf[2] = (unsigned char)((word) >> 16); \
+        hbuf[3] = (unsigned char)((word) >> 24); \
+        check = crc32(check, hbuf, 4); \
+    } while (0)
+#endif
+
+/* Load registers with state in inflate() for speed */
+#define LOAD() \
+    do { \
+        put = strm->next_out; \
+        left = strm->avail_out; \
+        next = strm->next_in; \
+        have = strm->avail_in; \
+        hold = state->hold; \
+        bits = state->bits; \
+    } while (0)
+
+/* Restore state from registers in inflate() */
+#define RESTORE() \
+    do { \
+        strm->next_out = put; \
+        strm->avail_out = left; \
+        strm->next_in = next; \
+        strm->avail_in = have; \
+        state->hold = hold; \
+        state->bits = bits; \
+    } while (0)
+
+/* Clear the input bit accumulator */
+#define INITBITS() \
+    do { \
+        hold = 0; \
+        bits = 0; \
+    } while (0)
+
+/* Get a byte of input into the bit accumulator, or return from inflate()
+   if there is no input available. */
+#define PULLBYTE() \
+    do { \
+        if (have == 0) goto inf_leave; \
+        have--; \
+        hold += (unsigned long)(*next++) << bits; \
+        bits += 8; \
+    } while (0)
+
+/* Assure that there are at least n bits in the bit accumulator.  If there is
+   not enough available input to do that, then return from inflate(). */
+#define NEEDBITS(n) \
+    do { \
+        while (bits < (unsigned)(n)) \
+            PULLBYTE(); \
+    } while (0)
+
+/* Return the low n bits of the bit accumulator (n < 16) */
+#define BITS(n) \
+    ((unsigned)hold & ((1U << (n)) - 1))
+
+/* Remove n bits from the bit accumulator */
+#define DROPBITS(n) \
+    do { \
+        hold >>= (n); \
+        bits -= (unsigned)(n); \
+    } while (0)
+
+/* Remove zero to seven bits as needed to go to a byte boundary */
+#define BYTEBITS() \
+    do { \
+        hold >>= bits & 7; \
+        bits -= bits & 7; \
+    } while (0)
+
+/*
+   inflate() uses a state machine to process as much input data and generate as
+   much output data as possible before returning.  The state machine is
+   structured roughly as follows:
+
+    for (;;) switch (state) {
+    ...
+    case STATEn:
+        if (not enough input data or output space to make progress)
+            return;
+        ... make progress ...
+        state = STATEm;
+        break;
+    ...
+    }
+
+   so when inflate() is called again, the same case is attempted again, and
+   if the appropriate resources are provided, the machine proceeds to the
+   next state.  The NEEDBITS() macro is usually the way the state evaluates
+   whether it can proceed or should return.  NEEDBITS() does the return if
+   the requested bits are not available.  The typical use of the BITS macros
+   is:
+
+        NEEDBITS(n);
+        ... do something with BITS(n) ...
+        DROPBITS(n);
+
+   where NEEDBITS(n) either returns from inflate() if there isn't enough
+   input left to load n bits into the accumulator, or it continues.  BITS(n)
+   gives the low n bits in the accumulator.  When done, DROPBITS(n) drops
+   the low n bits off the accumulator.  INITBITS() clears the accumulator
+   and sets the number of available bits to zero.  BYTEBITS() discards just
+   enough bits to put the accumulator on a byte boundary.  After BYTEBITS()
+   and a NEEDBITS(8), then BITS(8) would return the next byte in the stream.
+
+   NEEDBITS(n) uses PULLBYTE() to get an available byte of input, or to return
+   if there is no input available.  The decoding of variable length codes uses
+   PULLBYTE() directly in order to pull just enough bytes to decode the next
+   code, and no more.
+
+   Some states loop until they get enough input, making sure that enough
+   state information is maintained to continue the loop where it left off
+   if NEEDBITS() returns in the loop.  For example, want, need, and keep
+   would all have to actually be part of the saved state in case NEEDBITS()
+   returns:
+
+    case STATEw:
+        while (want < need) {
+            NEEDBITS(n);
+            keep[want++] = BITS(n);
+            DROPBITS(n);
+        }
+        state = STATEx;
+    case STATEx:
+
+   As shown above, if the next state is also the next case, then the break
+   is omitted.
+
+   A state may also return if there is not enough output space available to
+   complete that state.  Those states are copying stored data, writing a
+   literal byte, and copying a matching string.
+
+   When returning, a "goto inf_leave" is used to update the total counters,
+   update the check value, and determine whether any progress has been made
+   during that inflate() call in order to return the proper return code.
+   Progress is defined as a change in either strm->avail_in or strm->avail_out.
+   When there is a window, goto inf_leave will update the window with the last
+   output written.  If a goto inf_leave occurs in the middle of decompression
+   and there is no window currently, goto inf_leave will create one and copy
+   output to the window for the next call of inflate().
+
+   In this implementation, the flush parameter of inflate() only affects the
+   return code (per zlib.h).  inflate() always writes as much as possible to
+   strm->next_out, given the space available and the provided input--the effect
+   documented in zlib.h of Z_SYNC_FLUSH.  Furthermore, inflate() always defers
+   the allocation of and copying into a sliding window until necessary, which
+   provides the effect documented in zlib.h for Z_FINISH when the entire input
+   stream available.  So the only thing the flush parameter actually does is:
+   when flush is set to Z_FINISH, inflate() cannot return Z_OK.  Instead it
+   will return Z_BUF_ERROR if it has not reached the end of the stream.
+ */
+
+int ZEXPORT inflate(strm, flush)
+z_streamp strm;
+int flush;
+{
+    struct inflate_state FAR *state;
+    z_const unsigned char FAR *next;    /* next input */
+    unsigned char FAR *put;     /* next output */
+    unsigned have, left;        /* available input and output */
+    unsigned long hold;         /* bit buffer */
+    unsigned bits;              /* bits in bit buffer */
+    unsigned in, out;           /* save starting available input and output */
+    unsigned copy;              /* number of stored or match bytes to copy */
+    unsigned char FAR *from;    /* where to copy match bytes from */
+    code here;                  /* current decoding table entry */
+    code last;                  /* parent table entry */
+    unsigned len;               /* length to copy for repeats, bits to drop */
+    int ret;                    /* return code */
+#ifdef GUNZIP
+    unsigned char hbuf[4];      /* buffer for gzip header crc calculation */
+#endif
+    static const unsigned short order[19] = /* permutation of code lengths */
+        {16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15};
+
+    if (inflateStateCheck(strm) || strm->next_out == Z_NULL ||
+        (strm->next_in == Z_NULL && strm->avail_in != 0))
+        return Z_STREAM_ERROR;
+
+    state = (struct inflate_state FAR *)strm->state;
+    if (state->mode == TYPE) state->mode = TYPEDO;      /* skip check */
+    LOAD();
+    in = have;
+    out = left;
+    ret = Z_OK;
+    for (;;)
+        switch (state->mode) {
+        case HEAD:
+            if (state->wrap == 0) {
+                state->mode = TYPEDO;
+                break;
+            }
+            NEEDBITS(16);
+#ifdef GUNZIP
+            if ((state->wrap & 2) && hold == 0x8b1f) {  /* gzip header */
+                if (state->wbits == 0)
+                    state->wbits = 15;
+                state->check = crc32(0L, Z_NULL, 0);
+                CRC2(state->check, hold);
+                INITBITS();
+                state->mode = FLAGS;
+                break;
+            }
+            state->flags = 0;           /* expect zlib header */
+            if (state->head != Z_NULL)
+                state->head->done = -1;
+            if (!(state->wrap & 1) ||   /* check if zlib header allowed */
+#else
+            if (
+#endif
+                ((BITS(8) << 8) + (hold >> 8)) % 31) {
+                strm->msg = (char *)"incorrect header check";
+                state->mode = BAD;
+                break;
+            }
+            if (BITS(4) != Z_DEFLATED) {
+                strm->msg = (char *)"unknown compression method";
+                state->mode = BAD;
+                break;
+            }
+            DROPBITS(4);
+            len = BITS(4) + 8;
+            if (state->wbits == 0)
+                state->wbits = len;
+            if (len > 15 || len > state->wbits) {
+                strm->msg = (char *)"invalid window size";
+                state->mode = BAD;
+                break;
+            }
+            state->dmax = 1U << len;
+            Tracev((stderr, "inflate:   zlib header ok\n"));
+            strm->adler = state->check = adler32(0L, Z_NULL, 0);
+            state->mode = hold & 0x200 ? DICTID : TYPE;
+            INITBITS();
+            break;
+#ifdef GUNZIP
+        case FLAGS:
+            NEEDBITS(16);
+            state->flags = (int)(hold);
+            if ((state->flags & 0xff) != Z_DEFLATED) {
+                strm->msg = (char *)"unknown compression method";
+                state->mode = BAD;
+                break;
+            }
+            if (state->flags & 0xe000) {
+                strm->msg = (char *)"unknown header flags set";
+                state->mode = BAD;
+                break;
+            }
+            if (state->head != Z_NULL)
+                state->head->text = (int)((hold >> 8) & 1);
+            if ((state->flags & 0x0200) && (state->wrap & 4))
+                CRC2(state->check, hold);
+            INITBITS();
+            state->mode = TIME;
+        case TIME:
+            NEEDBITS(32);
+            if (state->head != Z_NULL)
+                state->head->time = hold;
+            if ((state->flags & 0x0200) && (state->wrap & 4))
+                CRC4(state->check, hold);
+            INITBITS();
+            state->mode = OS;
+        case OS:
+            NEEDBITS(16);
+            if (state->head != Z_NULL) {
+                state->head->xflags = (int)(hold & 0xff);
+                state->head->os = (int)(hold >> 8);
+            }
+            if ((state->flags & 0x0200) && (state->wrap & 4))
+                CRC2(state->check, hold);
+            INITBITS();
+            state->mode = EXLEN;
+        case EXLEN:
+            if (state->flags & 0x0400) {
+                NEEDBITS(16);
+                state->length = (unsigned)(hold);
+                if (state->head != Z_NULL)
+                    state->head->extra_len = (unsigned)hold;
+                if ((state->flags & 0x0200) && (state->wrap & 4))
+                    CRC2(state->check, hold);
+                INITBITS();
+            }
+            else if (state->head != Z_NULL)
+                state->head->extra = Z_NULL;
+            state->mode = EXTRA;
+        case EXTRA:
+            if (state->flags & 0x0400) {
+                copy = state->length;
+                if (copy > have) copy = have;
+                if (copy) {
+                    if (state->head != Z_NULL &&
+                        state->head->extra != Z_NULL) {
+                        len = state->head->extra_len - state->length;
+                        zmemcpy(state->head->extra + len, next,
+                                len + copy > state->head->extra_max ?
+                                state->head->extra_max - len : copy);
+                    }
+                    if ((state->flags & 0x0200) && (state->wrap & 4))
+                        state->check = crc32(state->check, next, copy);
+                    have -= copy;
+                    next += copy;
+                    state->length -= copy;
+                }
+                if (state->length) goto inf_leave;
+            }
+            state->length = 0;
+            state->mode = NAME;
+        case NAME:
+            if (state->flags & 0x0800) {
+                if (have == 0) goto inf_leave;
+                copy = 0;
+                do {
+                    len = (unsigned)(next[copy++]);
+                    if (state->head != Z_NULL &&
+                            state->head->name != Z_NULL &&
+                            state->length < state->head->name_max)
+                        state->head->name[state->length++] = (Bytef)len;
+                } while (len && copy < have);
+                if ((state->flags & 0x0200) && (state->wrap & 4))
+                    state->check = crc32(state->check, next, copy);
+                have -= copy;
+                next += copy;
+                if (len) goto inf_leave;
+            }
+            else if (state->head != Z_NULL)
+                state->head->name = Z_NULL;
+            state->length = 0;
+            state->mode = COMMENT;
+        case COMMENT:
+            if (state->flags & 0x1000) {
+                if (have == 0) goto inf_leave;
+                copy = 0;
+                do {
+                    len = (unsigned)(next[copy++]);
+                    if (state->head != Z_NULL &&
+                            state->head->comment != Z_NULL &&
+                            state->length < state->head->comm_max)
+                        state->head->comment[state->length++] = (Bytef)len;
+                } while (len && copy < have);
+                if ((state->flags & 0x0200) && (state->wrap & 4))
+                    state->check = crc32(state->check, next, copy);
+                have -= copy;
+                next += copy;
+                if (len) goto inf_leave;
+            }
+            else if (state->head != Z_NULL)
+                state->head->comment = Z_NULL;
+            state->mode = HCRC;
+        case HCRC:
+            if (state->flags & 0x0200) {
+                NEEDBITS(16);
+                if ((state->wrap & 4) && hold != (state->check & 0xffff)) {
+                    strm->msg = (char *)"header crc mismatch";
+                    state->mode = BAD;
+                    break;
+                }
+                INITBITS();
+            }
+            if (state->head != Z_NULL) {
+                state->head->hcrc = (int)((state->flags >> 9) & 1);
+                state->head->done = 1;
+            }
+            strm->adler = state->check = crc32(0L, Z_NULL, 0);
+            state->mode = TYPE;
+            break;
+#endif
+        case DICTID:
+            NEEDBITS(32);
+            strm->adler = state->check = ZSWAP32(hold);
+            INITBITS();
+            state->mode = DICT;
+        case DICT:
+            if (state->havedict == 0) {
+                RESTORE();
+                return Z_NEED_DICT;
+            }
+            strm->adler = state->check = adler32(0L, Z_NULL, 0);
+            state->mode = TYPE;
+        case TYPE:
+            if (flush == Z_BLOCK || flush == Z_TREES) goto inf_leave;
+        case TYPEDO:
+            if (state->last) {
+                BYTEBITS();
+                state->mode = CHECK;
+                break;
+            }
+            NEEDBITS(3);
+            state->last = BITS(1);
+            DROPBITS(1);
+            switch (BITS(2)) {
+            case 0:                             /* stored block */
+                Tracev((stderr, "inflate:     stored block%s\n",
+                        state->last ? " (last)" : ""));
+                state->mode = STORED;
+                break;
+            case 1:                             /* fixed block */
+                fixedtables(state);
+                Tracev((stderr, "inflate:     fixed codes block%s\n",
+                        state->last ? " (last)" : ""));
+                state->mode = LEN_;             /* decode codes */
+                if (flush == Z_TREES) {
+                    DROPBITS(2);
+                    goto inf_leave;
+                }
+                break;
+            case 2:                             /* dynamic block */
+                Tracev((stderr, "inflate:     dynamic codes block%s\n",
+                        state->last ? " (last)" : ""));
+                state->mode = TABLE;
+                break;
+            case 3:
+                strm->msg = (char *)"invalid block type";
+                state->mode = BAD;
+            }
+            DROPBITS(2);
+            break;
+        case STORED:
+            BYTEBITS();                         /* go to byte boundary */
+            NEEDBITS(32);
+            if ((hold & 0xffff) != ((hold >> 16) ^ 0xffff)) {
+                strm->msg = (char *)"invalid stored block lengths";
+                state->mode = BAD;
+                break;
+            }
+            state->length = (unsigned)hold & 0xffff;
+            Tracev((stderr, "inflate:       stored length %u\n",
+                    state->length));
+            INITBITS();
+            state->mode = COPY_;
+            if (flush == Z_TREES) goto inf_leave;
+        case COPY_:
+            state->mode = COPY;
+        case COPY:
+            copy = state->length;
+            if (copy) {
+                if (copy > have) copy = have;
+                if (copy > left) copy = left;
+                if (copy == 0) goto inf_leave;
+                zmemcpy(put, next, copy);
+                have -= copy;
+                next += copy;
+                left -= copy;
+                put += copy;
+                state->length -= copy;
+                break;
+            }
+            Tracev((stderr, "inflate:       stored end\n"));
+            state->mode = TYPE;
+            break;
+        case TABLE:
+            NEEDBITS(14);
+            state->nlen = BITS(5) + 257;
+            DROPBITS(5);
+            state->ndist = BITS(5) + 1;
+            DROPBITS(5);
+            state->ncode = BITS(4) + 4;
+            DROPBITS(4);
+#ifndef PKZIP_BUG_WORKAROUND
+            if (state->nlen > 286 || state->ndist > 30) {
+                strm->msg = (char *)"too many length or distance symbols";
+                state->mode = BAD;
+                break;
+            }
+#endif
+            Tracev((stderr, "inflate:       table sizes ok\n"));
+            state->have = 0;
+            state->mode = LENLENS;
+        case LENLENS:
+            while (state->have < state->ncode) {
+                NEEDBITS(3);
+                state->lens[order[state->have++]] = (unsigned short)BITS(3);
+                DROPBITS(3);
+            }
+            while (state->have < 19)
+                state->lens[order[state->have++]] = 0;
+            state->next = state->codes;
+            state->lencode = (const code FAR *)(state->next);
+            state->lenbits = 7;
+            ret = inflate_table(CODES, state->lens, 19, &(state->next),
+                                &(state->lenbits), state->work);
+            if (ret) {
+                strm->msg = (char *)"invalid code lengths set";
+                state->mode = BAD;
+                break;
+            }
+            Tracev((stderr, "inflate:       code lengths ok\n"));
+            state->have = 0;
+            state->mode = CODELENS;
+        case CODELENS:
+            while (state->have < state->nlen + state->ndist) {
+                for (;;) {
+                    here = state->lencode[BITS(state->lenbits)];
+                    if ((unsigned)(here.bits) <= bits) break;
+                    PULLBYTE();
+                }
+                if (here.val < 16) {
+                    DROPBITS(here.bits);
+                    state->lens[state->have++] = here.val;
+                }
+                else {
+                    if (here.val == 16) {
+                        NEEDBITS(here.bits + 2);
+                        DROPBITS(here.bits);
+                        if (state->have == 0) {
+                            strm->msg = (char *)"invalid bit length repeat";
+                            state->mode = BAD;
+                            break;
+                        }
+                        len = state->lens[state->have - 1];
+                        copy = 3 + BITS(2);
+                        DROPBITS(2);
+                    }
+                    else if (here.val == 17) {
+                        NEEDBITS(here.bits + 3);
+                        DROPBITS(here.bits);
+                        len = 0;
+                        copy = 3 + BITS(3);
+                        DROPBITS(3);
+                    }
+                    else {
+                        NEEDBITS(here.bits + 7);
+                        DROPBITS(here.bits);
+                        len = 0;
+                        copy = 11 + BITS(7);
+                        DROPBITS(7);
+                    }
+                    if (state->have + copy > state->nlen + state->ndist) {
+                        strm->msg = (char *)"invalid bit length repeat";
+                        state->mode = BAD;
+                        break;
+                    }
+                    while (copy--)
+                        state->lens[state->have++] = (unsigned short)len;
+                }
+            }
+
+            /* handle error breaks in while */
+            if (state->mode == BAD) break;
+
+            /* check for end-of-block code (better have one) */
+            if (state->lens[256] == 0) {
+                strm->msg = (char *)"invalid code -- missing end-of-block";
+                state->mode = BAD;
+                break;
+            }
+
+            /* build code tables -- note: do not change the lenbits or distbits
+               values here (9 and 6) without reading the comments in inftrees.h
+               concerning the ENOUGH constants, which depend on those values */
+            state->next = state->codes;
+            state->lencode = (const code FAR *)(state->next);
+            state->lenbits = 9;
+            ret = inflate_table(LENS, state->lens, state->nlen, &(state->next),
+                                &(state->lenbits), state->work);
+            if (ret) {
+                strm->msg = (char *)"invalid literal/lengths set";
+                state->mode = BAD;
+                break;
+            }
+            state->distcode = (const code FAR *)(state->next);
+            state->distbits = 6;
+            ret = inflate_table(DISTS, state->lens + state->nlen, state->ndist,
+                            &(state->next), &(state->distbits), state->work);
+            if (ret) {
+                strm->msg = (char *)"invalid distances set";
+                state->mode = BAD;
+                break;
+            }
+            Tracev((stderr, "inflate:       codes ok\n"));
+            state->mode = LEN_;
+            if (flush == Z_TREES) goto inf_leave;
+        case LEN_:
+            state->mode = LEN;
+        case LEN:
+            if (have >= INFLATE_FAST_MIN_INPUT &&
+                left >= INFLATE_FAST_MIN_OUTPUT) {
+                RESTORE();
+                inflate_fast_chunk_(strm, out);
+                LOAD();
+                if (state->mode == TYPE)
+                    state->back = -1;
+                break;
+            }
+            state->back = 0;
+            for (;;) {
+                here = state->lencode[BITS(state->lenbits)];
+                if ((unsigned)(here.bits) <= bits) break;
+                PULLBYTE();
+            }
+            if (here.op && (here.op & 0xf0) == 0) {
+                last = here;
+                for (;;) {
+                    here = state->lencode[last.val +
+                            (BITS(last.bits + last.op) >> last.bits)];
+                    if ((unsigned)(last.bits + here.bits) <= bits) break;
+                    PULLBYTE();
+                }
+                DROPBITS(last.bits);
+                state->back += last.bits;
+            }
+            DROPBITS(here.bits);
+            state->back += here.bits;
+            state->length = (unsigned)here.val;
+            if ((int)(here.op) == 0) {
+                Tracevv((stderr, here.val >= 0x20 && here.val < 0x7f ?
+                        "inflate:         literal '%c'\n" :
+                        "inflate:         literal 0x%02x\n", here.val));
+                state->mode = LIT;
+                break;
+            }
+            if (here.op & 32) {
+                Tracevv((stderr, "inflate:         end of block\n"));
+                state->back = -1;
+                state->mode = TYPE;
+                break;
+            }
+            if (here.op & 64) {
+                strm->msg = (char *)"invalid literal/length code";
+                state->mode = BAD;
+                break;
+            }
+            state->extra = (unsigned)(here.op) & 15;
+            state->mode = LENEXT;
+        case LENEXT:
+            if (state->extra) {
+                NEEDBITS(state->extra);
+                state->length += BITS(state->extra);
+                DROPBITS(state->extra);
+                state->back += state->extra;
+            }
+            Tracevv((stderr, "inflate:         length %u\n", state->length));
+            state->was = state->length;
+            state->mode = DIST;
+        case DIST:
+            for (;;) {
+                here = state->distcode[BITS(state->distbits)];
+                if ((unsigned)(here.bits) <= bits) break;
+                PULLBYTE();
+            }
+            if ((here.op & 0xf0) == 0) {
+                last = here;
+                for (;;) {
+                    here = state->distcode[last.val +
+                            (BITS(last.bits + last.op) >> last.bits)];
+                    if ((unsigned)(last.bits + here.bits) <= bits) break;
+                    PULLBYTE();
+                }
+                DROPBITS(last.bits);
+                state->back += last.bits;
+            }
+            DROPBITS(here.bits);
+            state->back += here.bits;
+            if (here.op & 64) {
+                strm->msg = (char *)"invalid distance code";
+                state->mode = BAD;
+                break;
+            }
+            state->offset = (unsigned)here.val;
+            state->extra = (unsigned)(here.op) & 15;
+            state->mode = DISTEXT;
+        case DISTEXT:
+            if (state->extra) {
+                NEEDBITS(state->extra);
+                state->offset += BITS(state->extra);
+                DROPBITS(state->extra);
+                state->back += state->extra;
+            }
+#ifdef INFLATE_STRICT
+            if (state->offset > state->dmax) {
+                strm->msg = (char *)"invalid distance too far back";
+                state->mode = BAD;
+                break;
+            }
+#endif
+            Tracevv((stderr, "inflate:         distance %u\n", state->offset));
+            state->mode = MATCH;
+        case MATCH:
+            if (left == 0) goto inf_leave;
+            copy = out - left;
+            if (state->offset > copy) {         /* copy from window */
+                copy = state->offset - copy;
+                if (copy > state->whave) {
+                    if (state->sane) {
+                        strm->msg = (char *)"invalid distance too far back";
+                        state->mode = BAD;
+                        break;
+                    }
+#ifdef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR
+                    Trace((stderr, "inflate.c too far\n"));
+                    copy -= state->whave;
+                    if (copy > state->length) copy = state->length;
+                    if (copy > left) copy = left;
+                    left -= copy;
+                    state->length -= copy;
+                    do {
+                        *put++ = 0;
+                    } while (--copy);
+                    if (state->length == 0) state->mode = LEN;
+                    break;
+#endif
+                }
+                if (copy > state->wnext) {
+                    copy -= state->wnext;
+                    from = state->window + (state->wsize - copy);
+                }
+                else
+                    from = state->window + (state->wnext - copy);
+                if (copy > state->length) copy = state->length;
+                if (copy > left) copy = left;
+                put = chunkcopy_safe(put, from, copy, put + left);
+            }
+            else {                              /* copy from output */
+                copy = state->length;
+                if (copy > left) copy = left;
+                put = chunkcopy_lapped_safe(put, state->offset, copy, put + left);
+            }
+            left -= copy;
+            state->length -= copy;
+            if (state->length == 0) state->mode = LEN;
+            break;
+        case LIT:
+            if (left == 0) goto inf_leave;
+            *put++ = (unsigned char)(state->length);
+            left--;
+            state->mode = LEN;
+            break;
+        case CHECK:
+            if (state->wrap) {
+                NEEDBITS(32);
+                out -= left;
+                strm->total_out += out;
+                state->total += out;
+                if ((state->wrap & 4) && out)
+                    strm->adler = state->check =
+                        UPDATE(state->check, put - out, out);
+                out = left;
+                if ((state->wrap & 4) && (
+#ifdef GUNZIP
+                     state->flags ? hold :
+#endif
+                     ZSWAP32(hold)) != state->check) {
+                    strm->msg = (char *)"incorrect data check";
+                    state->mode = BAD;
+                    break;
+                }
+                INITBITS();
+                Tracev((stderr, "inflate:   check matches trailer\n"));
+            }
+#ifdef GUNZIP
+            state->mode = LENGTH;
+        case LENGTH:
+            if (state->wrap && state->flags) {
+                NEEDBITS(32);
+                if (hold != (state->total & 0xffffffffUL)) {
+                    strm->msg = (char *)"incorrect length check";
+                    state->mode = BAD;
+                    break;
+                }
+                INITBITS();
+                Tracev((stderr, "inflate:   length matches trailer\n"));
+            }
+#endif
+            state->mode = DONE;
+        case DONE:
+            ret = Z_STREAM_END;
+            goto inf_leave;
+        case BAD:
+            ret = Z_DATA_ERROR;
+            goto inf_leave;
+        case MEM:
+            return Z_MEM_ERROR;
+        case SYNC:
+        default:
+            return Z_STREAM_ERROR;
+        }
+
+    /*
+       Return from inflate(), updating the total counts and the check value.
+       If there was no progress during the inflate() call, return a buffer
+       error.  Call updatewindow() to create and/or update the window state.
+       Note: a memory error from inflate() is non-recoverable.
+     */
+  inf_leave:
+   /* We write a defined value in the unused space to help mark
+    * where the stream has ended. We don't use zeros as that can
+    * mislead clients relying on undefined behavior (i.e. assuming
+    * that the data is over when the buffer has a zero/null value).
+    */
+   if (left >= CHUNKCOPY_CHUNK_SIZE)
+      memset(put, 0x55, CHUNKCOPY_CHUNK_SIZE);
+   else
+      memset(put, 0x55, left);
+
+    RESTORE();
+    if (state->wsize || (out != strm->avail_out && state->mode < BAD &&
+            (state->mode < CHECK || flush != Z_FINISH)))
+        if (updatewindow(strm, strm->next_out, out - strm->avail_out)) {
+            state->mode = MEM;
+            return Z_MEM_ERROR;
+        }
+    in -= strm->avail_in;
+    out -= strm->avail_out;
+    strm->total_in += in;
+    strm->total_out += out;
+    state->total += out;
+    if ((state->wrap & 4) && out)
+        strm->adler = state->check =
+            UPDATE(state->check, strm->next_out - out, out);
+    strm->data_type = (int)state->bits + (state->last ? 64 : 0) +
+                      (state->mode == TYPE ? 128 : 0) +
+                      (state->mode == LEN_ || state->mode == COPY_ ? 256 : 0);
+    if (((in == 0 && out == 0) || flush == Z_FINISH) && ret == Z_OK)
+        ret = Z_BUF_ERROR;
+    return ret;
+}
+
+int ZEXPORT inflateEnd(strm)
+z_streamp strm;
+{
+    struct inflate_state FAR *state;
+    if (inflateStateCheck(strm))
+        return Z_STREAM_ERROR;
+    state = (struct inflate_state FAR *)strm->state;
+    if (state->window != Z_NULL) ZFREE(strm, state->window);
+    ZFREE(strm, strm->state);
+    strm->state = Z_NULL;
+    Tracev((stderr, "inflate: end\n"));
+    return Z_OK;
+}
+
+int ZEXPORT inflateGetDictionary(strm, dictionary, dictLength)
+z_streamp strm;
+Bytef *dictionary;
+uInt *dictLength;
+{
+    struct inflate_state FAR *state;
+
+    /* check state */
+    if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
+    state = (struct inflate_state FAR *)strm->state;
+
+    /* copy dictionary */
+    if (state->whave && dictionary != Z_NULL) {
+        zmemcpy(dictionary, state->window + state->wnext,
+                state->whave - state->wnext);
+        zmemcpy(dictionary + state->whave - state->wnext,
+                state->window, state->wnext);
+    }
+    if (dictLength != Z_NULL)
+        *dictLength = state->whave;
+    return Z_OK;
+}
+
+int ZEXPORT inflateSetDictionary(strm, dictionary, dictLength)
+z_streamp strm;
+const Bytef *dictionary;
+uInt dictLength;
+{
+    struct inflate_state FAR *state;
+    unsigned long dictid;
+    int ret;
+
+    /* check state */
+    if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
+    state = (struct inflate_state FAR *)strm->state;
+    if (state->wrap != 0 && state->mode != DICT)
+        return Z_STREAM_ERROR;
+
+    /* check for correct dictionary identifier */
+    if (state->mode == DICT) {
+        dictid = adler32(0L, Z_NULL, 0);
+        dictid = adler32(dictid, dictionary, dictLength);
+        if (dictid != state->check)
+            return Z_DATA_ERROR;
+    }
+
+    /* copy dictionary to window using updatewindow(), which will amend the
+       existing dictionary if appropriate */
+    ret = updatewindow(strm, dictionary + dictLength, dictLength);
+    if (ret) {
+        state->mode = MEM;
+        return Z_MEM_ERROR;
+    }
+    state->havedict = 1;
+    Tracev((stderr, "inflate:   dictionary set\n"));
+    return Z_OK;
+}
+
+int ZEXPORT inflateGetHeader(strm, head)
+z_streamp strm;
+gz_headerp head;
+{
+    struct inflate_state FAR *state;
+
+    /* check state */
+    if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
+    state = (struct inflate_state FAR *)strm->state;
+    if ((state->wrap & 2) == 0) return Z_STREAM_ERROR;
+
+    /* save header structure */
+    state->head = head;
+    head->done = 0;
+    return Z_OK;
+}
+
+/*
+   Search buf[0..len-1] for the pattern: 0, 0, 0xff, 0xff.  Return when found
+   or when out of input.  When called, *have is the number of pattern bytes
+   found in order so far, in 0..3.  On return *have is updated to the new
+   state.  If on return *have equals four, then the pattern was found and the
+   return value is how many bytes were read including the last byte of the
+   pattern.  If *have is less than four, then the pattern has not been found
+   yet and the return value is len.  In the latter case, syncsearch() can be
+   called again with more data and the *have state.  *have is initialized to
+   zero for the first call.
+ */
+local unsigned syncsearch(have, buf, len)
+unsigned FAR *have;
+const unsigned char FAR *buf;
+unsigned len;
+{
+    unsigned got;
+    unsigned next;
+
+    got = *have;
+    next = 0;
+    while (next < len && got < 4) {
+        if ((int)(buf[next]) == (got < 2 ? 0 : 0xff))
+            got++;
+        else if (buf[next])
+            got = 0;
+        else
+            got = 4 - got;
+        next++;
+    }
+    *have = got;
+    return next;
+}
+
+int ZEXPORT inflateSync(strm)
+z_streamp strm;
+{
+    unsigned len;               /* number of bytes to look at or looked at */
+    unsigned long in, out;      /* temporary to save total_in and total_out */
+    unsigned char buf[4];       /* to restore bit buffer to byte string */
+    struct inflate_state FAR *state;
+
+    /* check parameters */
+    if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
+    state = (struct inflate_state FAR *)strm->state;
+    if (strm->avail_in == 0 && state->bits < 8) return Z_BUF_ERROR;
+
+    /* if first time, start search in bit buffer */
+    if (state->mode != SYNC) {
+        state->mode = SYNC;
+        state->hold <<= state->bits & 7;
+        state->bits -= state->bits & 7;
+        len = 0;
+        while (state->bits >= 8) {
+            buf[len++] = (unsigned char)(state->hold);
+            state->hold >>= 8;
+            state->bits -= 8;
+        }
+        state->have = 0;
+        syncsearch(&(state->have), buf, len);
+    }
+
+    /* search available input */
+    len = syncsearch(&(state->have), strm->next_in, strm->avail_in);
+    strm->avail_in -= len;
+    strm->next_in += len;
+    strm->total_in += len;
+
+    /* return no joy or set up to restart inflate() on a new block */
+    if (state->have != 4) return Z_DATA_ERROR;
+    in = strm->total_in;  out = strm->total_out;
+    inflateReset(strm);
+    strm->total_in = in;  strm->total_out = out;
+    state->mode = TYPE;
+    return Z_OK;
+}
+
+/*
+   Returns true if inflate is currently at the end of a block generated by
+   Z_SYNC_FLUSH or Z_FULL_FLUSH. This function is used by one PPP
+   implementation to provide an additional safety check. PPP uses
+   Z_SYNC_FLUSH but removes the length bytes of the resulting empty stored
+   block. When decompressing, PPP checks that at the end of input packet,
+   inflate is waiting for these length bytes.
+ */
+int ZEXPORT inflateSyncPoint(strm)
+z_streamp strm;
+{
+    struct inflate_state FAR *state;
+
+    if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
+    state = (struct inflate_state FAR *)strm->state;
+    return state->mode == STORED && state->bits == 0;
+}
+
+int ZEXPORT inflateCopy(dest, source)
+z_streamp dest;
+z_streamp source;
+{
+    struct inflate_state FAR *state;
+    struct inflate_state FAR *copy;
+    unsigned char FAR *window;
+    unsigned wsize;
+
+    /* check input */
+    if (inflateStateCheck(source) || dest == Z_NULL)
+        return Z_STREAM_ERROR;
+    state = (struct inflate_state FAR *)source->state;
+
+    /* allocate space */
+    copy = (struct inflate_state FAR *)
+           ZALLOC(source, 1, sizeof(struct inflate_state));
+    if (copy == Z_NULL) return Z_MEM_ERROR;
+    window = Z_NULL;
+    if (state->window != Z_NULL) {
+        window = (unsigned char FAR *)
+                 ZALLOC(source, 1U << state->wbits, sizeof(unsigned char));
+        if (window == Z_NULL) {
+            ZFREE(source, copy);
+            return Z_MEM_ERROR;
+        }
+    }
+
+    /* copy state */
+    zmemcpy((voidpf)dest, (voidpf)source, sizeof(z_stream));
+    zmemcpy((voidpf)copy, (voidpf)state, sizeof(struct inflate_state));
+    copy->strm = dest;
+    if (state->lencode >= state->codes &&
+        state->lencode <= state->codes + ENOUGH - 1) {
+        copy->lencode = copy->codes + (state->lencode - state->codes);
+        copy->distcode = copy->codes + (state->distcode - state->codes);
+    }
+    copy->next = copy->codes + (state->next - state->codes);
+    if (window != Z_NULL) {
+        wsize = 1U << state->wbits;
+        zmemcpy(window, state->window, wsize);
+    }
+    copy->window = window;
+    dest->state = (struct internal_state FAR *)copy;
+    return Z_OK;
+}
+
+int ZEXPORT inflateUndermine(strm, subvert)
+z_streamp strm;
+int subvert;
+{
+    struct inflate_state FAR *state;
+
+    if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
+    state = (struct inflate_state FAR *)strm->state;
+#ifdef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR
+    state->sane = !subvert;
+    return Z_OK;
+#else
+    (void)subvert;
+    state->sane = 1;
+    return Z_DATA_ERROR;
+#endif
+}
+
+int ZEXPORT inflateValidate(strm, check)
+z_streamp strm;
+int check;
+{
+    struct inflate_state FAR *state;
+
+    if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
+    state = (struct inflate_state FAR *)strm->state;
+    if (check)
+        state->wrap |= 4;
+    else
+        state->wrap &= ~4;
+    return Z_OK;
+}
+
+long ZEXPORT inflateMark(strm)
+z_streamp strm;
+{
+    struct inflate_state FAR *state;
+
+    if (inflateStateCheck(strm))
+        return -(1L << 16);
+    state = (struct inflate_state FAR *)strm->state;
+    return (long)(((unsigned long)((long)state->back)) << 16) +
+        (state->mode == COPY ? state->length :
+            (state->mode == MATCH ? state->was - state->length : 0));
+}
+
+unsigned long ZEXPORT inflateCodesUsed(strm)
+z_streamp strm;
+{
+    struct inflate_state FAR *state;
+    if (inflateStateCheck(strm)) return (unsigned long)-1;
+    state = (struct inflate_state FAR *)strm->state;
+    return (unsigned long)(state->next - state->codes);
+}
diff --git a/modules/zlib/src/inftrees.c b/modules/zlib/src/inftrees.c
index 44d89cf24..2ea08fc13 100644
--- a/modules/zlib/src/inftrees.c
+++ b/modules/zlib/src/inftrees.c
@@ -1,5 +1,5 @@
 /* inftrees.c -- generate Huffman trees for efficient decoding
- * Copyright (C) 1995-2013 Mark Adler
+ * Copyright (C) 1995-2017 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -9,7 +9,7 @@
 #define MAXBITS 15
 
 const char inflate_copyright[] =
-   " inflate 1.2.8 Copyright 1995-2013 Mark Adler ";
+   " inflate 1.2.11 Copyright 1995-2017 Mark Adler ";
 /*
   If you use the zlib library in a product, an acknowledgment is welcome
   in the documentation of your product. If for some reason you cannot
@@ -54,7 +54,7 @@ unsigned short FAR *work;
     code FAR *next;             /* next available space in table */
     const unsigned short FAR *base;     /* base value table to use */
     const unsigned short FAR *extra;    /* extra bits table to use */
-    int end;                    /* use base and extra for symbol > end */
+    unsigned match;             /* use base and extra for symbol >= match */
     unsigned short count[MAXBITS+1];    /* number of codes of each length */
     unsigned short offs[MAXBITS+1];     /* offsets in table for each length */
     static const unsigned short lbase[31] = { /* Length codes 257..285 base */
@@ -62,7 +62,7 @@ unsigned short FAR *work;
         35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0};
     static const unsigned short lext[31] = { /* Length codes 257..285 extra */
         16, 16, 16, 16, 16, 16, 16, 16, 17, 17, 17, 17, 18, 18, 18, 18,
-        19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 72, 78};
+        19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 77, 202};
     static const unsigned short dbase[32] = { /* Distance codes 0..29 base */
         1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
         257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,
@@ -181,19 +181,17 @@ unsigned short FAR *work;
     switch (type) {
     case CODES:
         base = extra = work;    /* dummy value--not used */
-        end = 19;
+        match = 20;
         break;
     case LENS:
         base = lbase;
-        base -= 257;
         extra = lext;
-        extra -= 257;
-        end = 256;
+        match = 257;
         break;
-    default:            /* DISTS */
+    default:    /* DISTS */
         base = dbase;
         extra = dext;
-        end = -1;
+        match = 0;
     }
 
     /* initialize state for loop */
@@ -216,13 +214,13 @@ unsigned short FAR *work;
     for (;;) {
         /* create table entry */
         here.bits = (unsigned char)(len - drop);
-        if ((int)(work[sym]) < end) {
+        if (work[sym] + 1U < match) {
             here.op = (unsigned char)0;
             here.val = work[sym];
         }
-        else if ((int)(work[sym]) > end) {
-            here.op = (unsigned char)(extra[work[sym]]);
-            here.val = base[work[sym]];
+        else if (work[sym] >= match) {
+            here.op = (unsigned char)(extra[work[sym] - match]);
+            here.val = base[work[sym] - match];
         }
         else {
             here.op = (unsigned char)(32 + 64);         /* end of block */
diff --git a/modules/zlib/src/moz.build b/modules/zlib/src/moz.build
index 7e993bda4..595f6c0f5 100644
--- a/modules/zlib/src/moz.build
+++ b/modules/zlib/src/moz.build
@@ -10,6 +10,38 @@ EXPORTS += [
     'zlib.h',
 ]
 
+if CONFIG['CPU_ARCH'] == 'arm':
+    DEFINES['ADLER32_SIMD_NEON'] = True
+    DEFINES['INFLATE_CHUNK_SIMD_NEON'] = True
+    SOURCES += [
+        'adler32_simd.c',
+        'inffast_chunk.c',
+        'inflate_simd.c',
+    ]
+
+if CONFIG['INTEL_ARCHITECTURE']:
+    DEFINES['ADLER32_SIMD_SSSE3'] = True
+    DEFINES['INFLATE_CHUNK_SIMD_SSE2'] = True
+    DEFINES['CRC32_SIMD_SSE42_PCLMUL'] = True
+    SOURCES += [
+        'adler32_simd.c',
+        'crc32_simd.c',
+        'crc_folding.c',
+        'fill_window_sse.c',
+        'inffast_chunk.c',
+        'inflate_simd.c',
+        'x86.c',
+    ]
+else:
+    SOURCES += [
+        'simd_stub.c',
+    ]
+
+if CONFIG['CPU_ARCH'] != 'arm' and not CONFIG['INTEL_ARCHITECTURE']:
+    SOURCES += [
+        'inflate.c',
+    ]
+
 if CONFIG['ZLIB_IN_MOZGLUE']:
     FINAL_LIBRARY = 'mozglue'
     DEFINES['IMPL_MFBT'] = True
@@ -28,7 +60,6 @@ SOURCES += [
     'gzwrite.c',
     'infback.c',
     'inffast.c',
-    'inflate.c',
     'inftrees.c',
     'trees.c',
     'uncompr.c',
diff --git a/modules/zlib/src/mozzconf.h b/modules/zlib/src/mozzconf.h
index f1da5ae28..9521297ea 100644
--- a/modules/zlib/src/mozzconf.h
+++ b/modules/zlib/src/mozzconf.h
@@ -44,7 +44,6 @@
 #define gzputs MOZ_Z_gzputs
 #define gzgets MOZ_Z_gzgets
 #define gzputc MOZ_Z_gzputc
-#define gzgetc MOZ_Z_gzgetc
 #define gzungetc MOZ_Z_gzungetc
 #define gzflush MOZ_Z_gzflush
 #define gzseek MOZ_Z_gzseek
@@ -126,4 +125,45 @@
 #define gzvprintf MOZ_Z_gzvprintf
 #define inflateGetDictionary MOZ_Z_inflateGetDictionary
 
+/* New as of zlib-1.2.11 */
+#define adler32_combine_ MOZ_Z_adler32_combine_
+#define crc32_combine_ MOZ_Z_crc32_combine_
+#define deflate_fast MOZ_Z_deflate_fast
+#define deflate_slow MOZ_Z_deflate_slow
+#define deflateStateCheck MOZ_Z_deflateStateCheck
+#define deflate_stored MOZ_Z_deflate_stored
+#define fill_window MOZ_Z_fill_window
+#define flush_pending MOZ_Z_flush_pending
+#define longest_match MOZ_Z_longest_match
+#define read_buf MOZ_Z_read_buf
+#define slide_hash MOZ_Z_slide_hash
+#define gz_open MOZ_Z_gz_open
+#define gz_reset MOZ_Z_gz_reset
+#define gz_avail MOZ_Z_gz_avail
+#define gz_fetch MOZ_Z_gz_fetch
+#define gz_decomp MOZ_Z_gz_decomp
+#define gz_write MOZ_Z_gz_write
+#define gz_comp MOZ_Z_gz_comp
+#define gz_init MOZ_Z_gz_init
+#define gz_write MOZ_Z_gz_write
+#define gz_zero MOZ_Z_gz_zero
+#define gz_load MOZ_Z_gz_load
+#define gz_look MOZ_Z_gz_look
+#define gz_read MOZ_Z_gz_read
+#define gz_skip MOZ_Z_gz_skip
+#define syncsearch MOZ_Z_syncsearch
+#define updatewindow MOZ_Z_updatewindow
+#define inflateStateCheck MOZ_Z_inflateStateCheck
+#define bi_flush MOZ_Z_bi_flush
+#define bi_windup MOZ_Z_bi_windup
+#define bl_order MOZ_Z_bl_order
+#define build_tree MOZ_Z_build_tree
+#define compress_block MOZ_Z_compress_block
+#define init_block MOZ_Z_init_block
+#define pqdownheap MOZ_Z_pqdownheap
+#define scan_tree MOZ_Z_scan_tree
+#define send_tree MOZ_Z_send_tree
+#define slide_hash MOZ_Z_slide_hash
+#define uncompress2 MOZ_Z_uncompress2
+
 #endif
diff --git a/modules/zlib/src/simd_stub.c b/modules/zlib/src/simd_stub.c
new file mode 100644
index 000000000..c6d460514
--- /dev/null
+++ b/modules/zlib/src/simd_stub.c
@@ -0,0 +1,35 @@
+/* simd_stub.c -- stub implementations
+* Copyright (C) 2014 Intel Corporation
+* For conditions of distribution and use, see copyright notice in zlib.h
+*/
+#include <assert.h>
+
+#include "deflate.h"
+#include "x86.h"
+
+int ZLIB_INTERNAL x86_cpu_enable_simd = 0;
+
+void ZLIB_INTERNAL crc_fold_init(deflate_state *const s) {
+    assert(0);
+}
+
+void ZLIB_INTERNAL crc_fold_copy(deflate_state *const s,
+                                 unsigned char *dst,
+                                 const unsigned char *src,
+                                 long len) {
+    assert(0);
+}
+
+unsigned ZLIB_INTERNAL crc_fold_512to32(deflate_state *const s) {
+    assert(0);
+    return 0;
+}
+
+void ZLIB_INTERNAL fill_window_sse(deflate_state *s)
+{
+    assert(0);
+}
+
+void x86_check_features(void)
+{
+}
diff --git a/modules/zlib/src/trees.c b/modules/zlib/src/trees.c
index 1fd7759ef..50cf4b457 100644
--- a/modules/zlib/src/trees.c
+++ b/modules/zlib/src/trees.c
@@ -1,5 +1,5 @@
 /* trees.c -- output deflated data using Huffman coding
- * Copyright (C) 1995-2012 Jean-loup Gailly
+ * Copyright (C) 1995-2017 Jean-loup Gailly
  * detect_data_type() function provided freely by Cosmin Truta, 2006
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
@@ -36,7 +36,7 @@
 
 #include "deflate.h"
 
-#ifdef DEBUG
+#ifdef ZLIB_DEBUG
 #  include <ctype.h>
 #endif
 
@@ -122,13 +122,13 @@ struct static_tree_desc_s {
     int     max_length;          /* max bit length for the codes */
 };
 
-local static_tree_desc  static_l_desc =
+local const static_tree_desc  static_l_desc =
 {static_ltree, extra_lbits, LITERALS+1, L_CODES, MAX_BITS};
 
-local static_tree_desc  static_d_desc =
+local const static_tree_desc  static_d_desc =
 {static_dtree, extra_dbits, 0,          D_CODES, MAX_BITS};
 
-local static_tree_desc  static_bl_desc =
+local const static_tree_desc  static_bl_desc =
 {(const ct_data *)0, extra_blbits, 0,   BL_CODES, MAX_BL_BITS};
 
 /* ===========================================================================
@@ -152,18 +152,16 @@ local int  detect_data_type OF((deflate_state *s));
 local unsigned bi_reverse OF((unsigned value, int length));
 local void bi_windup      OF((deflate_state *s));
 local void bi_flush       OF((deflate_state *s));
-local void copy_block     OF((deflate_state *s, charf *buf, unsigned len,
-                              int header));
 
 #ifdef GEN_TREES_H
 local void gen_trees_header OF((void));
 #endif
 
-#ifndef DEBUG
+#ifndef ZLIB_DEBUG
 #  define send_code(s, c, tree) send_bits(s, tree[c].Code, tree[c].Len)
    /* Send a code of the given tree. c and tree must not have side effects */
 
-#else /* DEBUG */
+#else /* !ZLIB_DEBUG */
 #  define send_code(s, c, tree) \
      { if (z_verbose>2) fprintf(stderr,"\ncd %3d ",(c)); \
        send_bits(s, tree[c].Code, tree[c].Len); }
@@ -182,7 +180,7 @@ local void gen_trees_header OF((void));
  * Send a value on a given number of bits.
  * IN assertion: length <= 16 and value fits in length bits.
  */
-#ifdef DEBUG
+#ifdef ZLIB_DEBUG
 local void send_bits      OF((deflate_state *s, int value, int length));
 
 local void send_bits(s, value, length)
@@ -208,12 +206,12 @@ local void send_bits(s, value, length)
         s->bi_valid += length;
     }
 }
-#else /* !DEBUG */
+#else /* !ZLIB_DEBUG */
 
 #define send_bits(s, value, length) \
 { int len = length;\
   if (s->bi_valid > (int)Buf_size - len) {\
-    int val = value;\
+    int val = (int)value;\
     s->bi_buf |= (ush)val << s->bi_valid;\
     put_short(s, s->bi_buf);\
     s->bi_buf = (ush)val >> (Buf_size - s->bi_valid);\
@@ -223,7 +221,7 @@ local void send_bits(s, value, length)
     s->bi_valid += len;\
   }\
 }
-#endif /* DEBUG */
+#endif /* ZLIB_DEBUG */
 
 
 /* the arguments must not have side effects */
@@ -317,7 +315,7 @@ local void tr_static_init()
  * Genererate the file trees.h describing the static trees.
  */
 #ifdef GEN_TREES_H
-#  ifndef DEBUG
+#  ifndef ZLIB_DEBUG
 #    include <stdio.h>
 #  endif
 
@@ -394,7 +392,7 @@ void ZLIB_INTERNAL _tr_init(s)
 
     s->bi_buf = 0;
     s->bi_valid = 0;
-#ifdef DEBUG
+#ifdef ZLIB_DEBUG
     s->compressed_len = 0L;
     s->bits_sent = 0L;
 #endif
@@ -522,12 +520,12 @@ local void gen_bitlen(s, desc)
         xbits = 0;
         if (n >= base) xbits = extra[n-base];
         f = tree[n].Freq;
-        s->opt_len += (ulg)f * (bits + xbits);
-        if (stree) s->static_len += (ulg)f * (stree[n].Len + xbits);
+        s->opt_len += (ulg)f * (unsigned)(bits + xbits);
+        if (stree) s->static_len += (ulg)f * (unsigned)(stree[n].Len + xbits);
     }
     if (overflow == 0) return;
 
-    Trace((stderr,"\nbit length overflow\n"));
+    Tracev((stderr,"\nbit length overflow\n"));
     /* This happens for example on obj2 and pic of the Calgary corpus */
 
     /* Find the first bit length which could increase: */
@@ -554,9 +552,8 @@ local void gen_bitlen(s, desc)
             m = s->heap[--h];
             if (m > max_code) continue;
             if ((unsigned) tree[m].Len != (unsigned) bits) {
-                Trace((stderr,"code %d bits %d->%d\n", m, tree[m].Len, bits));
-                s->opt_len += ((long)bits - (long)tree[m].Len)
-                              *(long)tree[m].Freq;
+                Tracev((stderr,"code %d bits %d->%d\n", m, tree[m].Len, bits));
+                s->opt_len += ((ulg)bits - tree[m].Len) * tree[m].Freq;
                 tree[m].Len = (ush)bits;
             }
             n--;
@@ -578,7 +575,7 @@ local void gen_codes (tree, max_code, bl_count)
     ushf *bl_count;            /* number of codes at each bit length */
 {
     ush next_code[MAX_BITS+1]; /* next code value for each bit length */
-    ush code = 0;              /* running code value */
+    unsigned code = 0;         /* running code value */
     int bits;                  /* bit index */
     int n;                     /* code index */
 
@@ -586,7 +583,8 @@ local void gen_codes (tree, max_code, bl_count)
      * without bit reversal.
      */
     for (bits = 1; bits <= MAX_BITS; bits++) {
-        next_code[bits] = code = (code + bl_count[bits-1]) << 1;
+        code = (code + bl_count[bits-1]) << 1;
+        next_code[bits] = (ush)code;
     }
     /* Check that the bit counts in bl_count are consistent. The last code
      * must be all ones.
@@ -599,7 +597,7 @@ local void gen_codes (tree, max_code, bl_count)
         int len = tree[n].Len;
         if (len == 0) continue;
         /* Now reverse the bits */
-        tree[n].Code = bi_reverse(next_code[len]++, len);
+        tree[n].Code = (ush)bi_reverse(next_code[len]++, len);
 
         Tracecv(tree != static_ltree, (stderr,"\nn %3d %c l %2d c %4x (%x) ",
              n, (isgraph(n) ? n : ' '), len, tree[n].Code, next_code[len]-1));
@@ -821,7 +819,7 @@ local int build_bl_tree(s)
         if (s->bl_tree[bl_order[max_blindex]].Len != 0) break;
     }
     /* Update opt_len to include the bit length tree and counts */
-    s->opt_len += 3*(max_blindex+1) + 5+5+4;
+    s->opt_len += 3*((ulg)max_blindex+1) + 5+5+4;
     Tracev((stderr, "\ndyn trees: dyn %ld, stat %ld",
             s->opt_len, s->static_len));
 
@@ -869,11 +867,17 @@ void ZLIB_INTERNAL _tr_stored_block(s, buf, stored_len, last)
     int last;         /* one if this is the last block for a file */
 {
     send_bits(s, (STORED_BLOCK<<1)+last, 3);    /* send block type */
-#ifdef DEBUG
+    bi_windup(s);        /* align on byte boundary */
+    put_short(s, (ush)stored_len);
+    put_short(s, (ush)~stored_len);
+    zmemcpy(s->pending_buf + s->pending, (Bytef *)buf, stored_len);
+    s->pending += stored_len;
+#ifdef ZLIB_DEBUG
     s->compressed_len = (s->compressed_len + 3 + 7) & (ulg)~7L;
     s->compressed_len += (stored_len + 4) << 3;
+    s->bits_sent += 2*16;
+    s->bits_sent += stored_len<<3;
 #endif
-    copy_block(s, buf, (unsigned)stored_len, 1); /* with header */
 }
 
 /* ===========================================================================
@@ -894,7 +898,7 @@ void ZLIB_INTERNAL _tr_align(s)
 {
     send_bits(s, STATIC_TREES<<1, 3);
     send_code(s, END_BLOCK, static_ltree);
-#ifdef DEBUG
+#ifdef ZLIB_DEBUG
     s->compressed_len += 10L; /* 3 for block type, 7 for EOB */
 #endif
     bi_flush(s);
@@ -902,7 +906,7 @@ void ZLIB_INTERNAL _tr_align(s)
 
 /* ===========================================================================
  * Determine the best encoding for the current block: dynamic trees, static
- * trees or store, and output the encoded block to the zip file.
+ * trees or store, and write out the encoded block.
  */
 void ZLIB_INTERNAL _tr_flush_block(s, buf, stored_len, last)
     deflate_state *s;
@@ -974,7 +978,7 @@ void ZLIB_INTERNAL _tr_flush_block(s, buf, stored_len, last)
         send_bits(s, (STATIC_TREES<<1)+last, 3);
         compress_block(s, (const ct_data *)static_ltree,
                        (const ct_data *)static_dtree);
-#ifdef DEBUG
+#ifdef ZLIB_DEBUG
         s->compressed_len += 3 + s->static_len;
 #endif
     } else {
@@ -983,7 +987,7 @@ void ZLIB_INTERNAL _tr_flush_block(s, buf, stored_len, last)
                        max_blindex+1);
         compress_block(s, (const ct_data *)s->dyn_ltree,
                        (const ct_data *)s->dyn_dtree);
-#ifdef DEBUG
+#ifdef ZLIB_DEBUG
         s->compressed_len += 3 + s->opt_len;
 #endif
     }
@@ -995,7 +999,7 @@ void ZLIB_INTERNAL _tr_flush_block(s, buf, stored_len, last)
 
     if (last) {
         bi_windup(s);
-#ifdef DEBUG
+#ifdef ZLIB_DEBUG
         s->compressed_len += 7;  /* align on byte boundary */
 #endif
     }
@@ -1090,7 +1094,7 @@ local void compress_block(s, ltree, dtree)
             send_code(s, code, dtree);       /* send the distance code */
             extra = extra_dbits[code];
             if (extra != 0) {
-                dist -= base_dist[code];
+                dist -= (unsigned)base_dist[code];
                 send_bits(s, dist, extra);   /* send the extra distance bits */
             }
         } /* literal or match pair ? */
@@ -1193,34 +1197,7 @@ local void bi_windup(s)
     }
     s->bi_buf = 0;
     s->bi_valid = 0;
-#ifdef DEBUG
+#ifdef ZLIB_DEBUG
     s->bits_sent = (s->bits_sent+7) & ~7;
 #endif
 }
-
-/* ===========================================================================
- * Copy a stored block, storing first the length and its
- * one's complement if requested.
- */
-local void copy_block(s, buf, len, header)
-    deflate_state *s;
-    charf    *buf;    /* the input data */
-    unsigned len;     /* its length */
-    int      header;  /* true if block header must be written */
-{
-    bi_windup(s);        /* align on byte boundary */
-
-    if (header) {
-        put_short(s, (ush)len);
-        put_short(s, (ush)~len);
-#ifdef DEBUG
-        s->bits_sent += 2*16;
-#endif
-    }
-#ifdef DEBUG
-    s->bits_sent += (ulg)len<<3;
-#endif
-    while (len--) {
-        put_byte(s, *buf++);
-    }
-}
diff --git a/modules/zlib/src/uncompr.c b/modules/zlib/src/uncompr.c
index 242e9493d..f03a1a865 100644
--- a/modules/zlib/src/uncompr.c
+++ b/modules/zlib/src/uncompr.c
@@ -1,5 +1,5 @@
 /* uncompr.c -- decompress a memory buffer
- * Copyright (C) 1995-2003, 2010 Jean-loup Gailly.
+ * Copyright (C) 1995-2003, 2010, 2014, 2016 Jean-loup Gailly, Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -9,51 +9,85 @@
 #include "zlib.h"
 
 /* ===========================================================================
-     Decompresses the source buffer into the destination buffer.  sourceLen is
-   the byte length of the source buffer. Upon entry, destLen is the total
-   size of the destination buffer, which must be large enough to hold the
-   entire uncompressed data. (The size of the uncompressed data must have
-   been saved previously by the compressor and transmitted to the decompressor
-   by some mechanism outside the scope of this compression library.)
-   Upon exit, destLen is the actual size of the compressed buffer.
-
-     uncompress returns Z_OK if success, Z_MEM_ERROR if there was not
-   enough memory, Z_BUF_ERROR if there was not enough room in the output
-   buffer, or Z_DATA_ERROR if the input data was corrupted.
+     Decompresses the source buffer into the destination buffer.  *sourceLen is
+   the byte length of the source buffer. Upon entry, *destLen is the total size
+   of the destination buffer, which must be large enough to hold the entire
+   uncompressed data. (The size of the uncompressed data must have been saved
+   previously by the compressor and transmitted to the decompressor by some
+   mechanism outside the scope of this compression library.) Upon exit,
+   *destLen is the size of the decompressed data and *sourceLen is the number
+   of source bytes consumed. Upon return, source + *sourceLen points to the
+   first unused input byte.
+
+     uncompress returns Z_OK if success, Z_MEM_ERROR if there was not enough
+   memory, Z_BUF_ERROR if there was not enough room in the output buffer, or
+   Z_DATA_ERROR if the input data was corrupted, including if the input data is
+   an incomplete zlib stream.
 */
-int ZEXPORT uncompress (dest, destLen, source, sourceLen)
+int ZEXPORT uncompress2 (dest, destLen, source, sourceLen)
     Bytef *dest;
     uLongf *destLen;
     const Bytef *source;
-    uLong sourceLen;
+    uLong *sourceLen;
 {
     z_stream stream;
     int err;
+    const uInt max = (uInt)-1;
+    uLong len, left;
+    Byte buf[1];    /* for detection of incomplete stream when *destLen == 0 */
 
-    stream.next_in = (z_const Bytef *)source;
-    stream.avail_in = (uInt)sourceLen;
-    /* Check for source > 64K on 16-bit machine: */
-    if ((uLong)stream.avail_in != sourceLen) return Z_BUF_ERROR;
-
-    stream.next_out = dest;
-    stream.avail_out = (uInt)*destLen;
-    if ((uLong)stream.avail_out != *destLen) return Z_BUF_ERROR;
+    len = *sourceLen;
+    if (*destLen) {
+        left = *destLen;
+        *destLen = 0;
+    }
+    else {
+        left = 1;
+        dest = buf;
+    }
 
+    stream.next_in = (z_const Bytef *)source;
+    stream.avail_in = 0;
     stream.zalloc = (alloc_func)0;
     stream.zfree = (free_func)0;
+    stream.opaque = (voidpf)0;
 
     err = inflateInit(&stream);
     if (err != Z_OK) return err;
 
-    err = inflate(&stream, Z_FINISH);
-    if (err != Z_STREAM_END) {
-        inflateEnd(&stream);
-        if (err == Z_NEED_DICT || (err == Z_BUF_ERROR && stream.avail_in == 0))
-            return Z_DATA_ERROR;
-        return err;
-    }
-    *destLen = stream.total_out;
+    stream.next_out = dest;
+    stream.avail_out = 0;
 
-    err = inflateEnd(&stream);
-    return err;
+    do {
+        if (stream.avail_out == 0) {
+            stream.avail_out = left > (uLong)max ? max : (uInt)left;
+            left -= stream.avail_out;
+        }
+        if (stream.avail_in == 0) {
+            stream.avail_in = len > (uLong)max ? max : (uInt)len;
+            len -= stream.avail_in;
+        }
+        err = inflate(&stream, Z_NO_FLUSH);
+    } while (err == Z_OK);
+
+    *sourceLen -= len + stream.avail_in;
+    if (dest != buf)
+        *destLen = stream.total_out;
+    else if (stream.total_out && err == Z_BUF_ERROR)
+        left = 1;
+
+    inflateEnd(&stream);
+    return err == Z_STREAM_END ? Z_OK :
+           err == Z_NEED_DICT ? Z_DATA_ERROR  :
+           err == Z_BUF_ERROR && left + stream.avail_out ? Z_DATA_ERROR :
+           err;
+}
+
+int ZEXPORT uncompress (dest, destLen, source, sourceLen)
+    Bytef *dest;
+    uLongf *destLen;
+    const Bytef *source;
+    uLong sourceLen;
+{
+    return uncompress2(dest, destLen, source, &sourceLen);
 }
diff --git a/modules/zlib/src/x86.c b/modules/zlib/src/x86.c
new file mode 100644
index 000000000..714dfdc42
--- /dev/null
+++ b/modules/zlib/src/x86.c
@@ -0,0 +1,122 @@
+/*
+ * x86 feature check
+ *
+ * Copyright (C) 2013 Intel Corporation. All rights reserved.
+ * Author:
+ *  Jim Kukunas
+ *
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+#include "x86.h"
+#include "zutil.h"
+
+int ZLIB_INTERNAL x86_cpu_enable_ssse3 = 0;
+int ZLIB_INTERNAL x86_cpu_enable_simd = 0;
+
+static void _x86_check_features(void);
+
+#ifndef _MSC_VER
+#include <pthread.h>
+
+pthread_once_t cpu_check_inited_once = PTHREAD_ONCE_INIT;
+
+void x86_check_features(void)
+{
+  pthread_once(&cpu_check_inited_once, _x86_check_features);
+}
+
+static void _x86_check_features(void)
+{
+    int x86_cpu_has_sse2;
+    int x86_cpu_has_ssse3;
+    int x86_cpu_has_sse42;
+    int x86_cpu_has_pclmulqdq;
+    unsigned eax, ebx, ecx, edx;
+
+    eax = 1;
+#ifdef __i386__
+    __asm__ __volatile__ (
+        "xchg %%ebx, %1\n\t"
+        "cpuid\n\t"
+        "xchg %1, %%ebx\n\t"
+    : "+a" (eax), "=S" (ebx), "=c" (ecx), "=d" (edx)
+    );
+#else
+    __asm__ __volatile__ (
+        "cpuid\n\t"
+    : "+a" (eax), "=b" (ebx), "=c" (ecx), "=d" (edx)
+    );
+#endif  /* (__i386__) */
+
+    x86_cpu_has_sse2 = edx & 0x4000000;
+    x86_cpu_has_ssse3 = ecx & 0x000200;
+    x86_cpu_has_sse42 = ecx & 0x100000;
+    x86_cpu_has_pclmulqdq = ecx & 0x2;
+
+    x86_cpu_enable_ssse3 = x86_cpu_has_ssse3;
+
+    x86_cpu_enable_simd = x86_cpu_has_sse2 &&
+                          x86_cpu_has_sse42 &&
+                          x86_cpu_has_pclmulqdq;
+}
+#else
+#include <intrin.h>
+#include <windows.h>
+#include <stdint.h>
+
+static volatile int32_t once_control = 0;
+static int fake_pthread_once(volatile int32_t *once_control,
+                             void (*init_routine)(void));
+
+void x86_check_features(void)
+{
+    fake_pthread_once(&once_control, _x86_check_features);
+}
+
+/* Copied from "perftools_pthread_once" in tcmalloc */
+static int fake_pthread_once(volatile int32_t *once_control,
+                             void (*init_routine)(void)) {
+    // Try for a fast path first. Note: this should be an acquire semantics read
+    // It is on x86 and x64, where Windows runs.
+    if (*once_control != 1) {
+        while (1) {
+            switch (InterlockedCompareExchange(once_control, 2, 0)) {
+                case 0:
+                    init_routine();
+                    InterlockedExchange(once_control, 1);
+                    return 0;
+                case 1:
+                    // The initializer has already been executed
+                    return 0;
+                default:
+                    // The initializer is being processed by another thread
+                    SwitchToThread();
+            }
+        }
+    }
+    return 0;
+}
+
+static void _x86_check_features(void)
+{
+    int x86_cpu_has_sse2;
+    int x86_cpu_has_ssse3;
+    int x86_cpu_has_sse42;
+    int x86_cpu_has_pclmulqdq;
+    int regs[4];
+
+    __cpuid(regs, 1);
+
+    x86_cpu_has_sse2 = regs[3] & 0x4000000;
+    x86_cpu_has_ssse3 = regs[2] & 0x000200;
+    x86_cpu_has_sse42 = regs[2] & 0x100000;
+    x86_cpu_has_pclmulqdq = regs[2] & 0x2;
+
+    x86_cpu_enable_ssse3 = x86_cpu_has_ssse3;
+
+    x86_cpu_enable_simd = x86_cpu_has_sse2 &&
+                          x86_cpu_has_sse42 &&
+                          x86_cpu_has_pclmulqdq;
+}
+#endif  /* _MSC_VER */
diff --git a/modules/zlib/src/x86.h b/modules/zlib/src/x86.h
new file mode 100644
index 000000000..7205d5026
--- /dev/null
+++ b/modules/zlib/src/x86.h
@@ -0,0 +1,16 @@
+/* x86.h -- check for x86 CPU features
+* Copyright (C) 2013 Intel Corporation Jim Kukunas
+* For conditions of distribution and use, see copyright notice in zlib.h
+*/
+
+#ifndef X86_H
+#define X86_H
+
+#include "zlib.h"
+
+extern int x86_cpu_enable_ssse3;
+extern int x86_cpu_enable_simd;
+
+void x86_check_features(void);
+
+#endif  /* X86_H */
diff --git a/modules/zlib/src/zconf.h b/modules/zlib/src/zconf.h
index fa0950b9d..e8ccda91c 100644
--- a/modules/zlib/src/zconf.h
+++ b/modules/zlib/src/zconf.h
@@ -1,5 +1,5 @@
 /* zconf.h -- configuration of the zlib compression library
- * Copyright (C) 1995-2013 Jean-loup Gailly.
+ * Copyright (C) 1995-2016 Jean-loup Gailly, Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -8,7 +8,6 @@
 #ifndef ZCONF_H
 #define ZCONF_H
 
-/* This header does prefixing as below, but with an updated set of names. */
 #include "mozzconf.h"
 
 /*
@@ -20,7 +19,7 @@
 #ifdef Z_PREFIX     /* may be set to #if 1 by ./configure */
 #  define Z_PREFIX_SET
 
-/* all linked symbols */
+/* all linked symbols and init macros */
 #  define _dist_code            z__dist_code
 #  define _length_code          z__length_code
 #  define _tr_align             z__tr_align
@@ -32,6 +31,7 @@
 #  define adler32               z_adler32
 #  define adler32_combine       z_adler32_combine
 #  define adler32_combine64     z_adler32_combine64
+#  define adler32_z             z_adler32_z
 #  ifndef Z_SOLO
 #    define compress              z_compress
 #    define compress2             z_compress2
@@ -40,10 +40,14 @@
 #  define crc32                 z_crc32
 #  define crc32_combine         z_crc32_combine
 #  define crc32_combine64       z_crc32_combine64
+#  define crc32_z               z_crc32_z
 #  define deflate               z_deflate
 #  define deflateBound          z_deflateBound
 #  define deflateCopy           z_deflateCopy
 #  define deflateEnd            z_deflateEnd
+#  define deflateGetDictionary  z_deflateGetDictionary
+#  define deflateInit           z_deflateInit
+#  define deflateInit2          z_deflateInit2
 #  define deflateInit2_         z_deflateInit2_
 #  define deflateInit_          z_deflateInit_
 #  define deflateParams         z_deflateParams
@@ -70,6 +74,8 @@
 #    define gzeof                 z_gzeof
 #    define gzerror               z_gzerror
 #    define gzflush               z_gzflush
+#    define gzfread               z_gzfread
+#    define gzfwrite              z_gzfwrite
 #    define gzgetc                z_gzgetc
 #    define gzgetc_               z_gzgetc_
 #    define gzgets                z_gzgets
@@ -81,7 +87,6 @@
 #      define gzopen_w              z_gzopen_w
 #    endif
 #    define gzprintf              z_gzprintf
-#    define gzvprintf             z_gzvprintf
 #    define gzputc                z_gzputc
 #    define gzputs                z_gzputs
 #    define gzread                z_gzread
@@ -92,32 +97,39 @@
 #    define gztell                z_gztell
 #    define gztell64              z_gztell64
 #    define gzungetc              z_gzungetc
+#    define gzvprintf             z_gzvprintf
 #    define gzwrite               z_gzwrite
 #  endif
 #  define inflate               z_inflate
 #  define inflateBack           z_inflateBack
 #  define inflateBackEnd        z_inflateBackEnd
+#  define inflateBackInit       z_inflateBackInit
 #  define inflateBackInit_      z_inflateBackInit_
+#  define inflateCodesUsed      z_inflateCodesUsed
 #  define inflateCopy           z_inflateCopy
 #  define inflateEnd            z_inflateEnd
+#  define inflateGetDictionary  z_inflateGetDictionary
 #  define inflateGetHeader      z_inflateGetHeader
+#  define inflateInit           z_inflateInit
+#  define inflateInit2          z_inflateInit2
 #  define inflateInit2_         z_inflateInit2_
 #  define inflateInit_          z_inflateInit_
 #  define inflateMark           z_inflateMark
 #  define inflatePrime          z_inflatePrime
 #  define inflateReset          z_inflateReset
 #  define inflateReset2         z_inflateReset2
+#  define inflateResetKeep      z_inflateResetKeep
 #  define inflateSetDictionary  z_inflateSetDictionary
-#  define inflateGetDictionary  z_inflateGetDictionary
 #  define inflateSync           z_inflateSync
 #  define inflateSyncPoint      z_inflateSyncPoint
 #  define inflateUndermine      z_inflateUndermine
-#  define inflateResetKeep      z_inflateResetKeep
+#  define inflateValidate       z_inflateValidate
 #  define inflate_copyright     z_inflate_copyright
 #  define inflate_fast          z_inflate_fast
 #  define inflate_table         z_inflate_table
 #  ifndef Z_SOLO
 #    define uncompress            z_uncompress
+#    define uncompress2           z_uncompress2
 #  endif
 #  define zError                z_zError
 #  ifndef Z_SOLO
@@ -227,9 +239,19 @@
 #  define z_const
 #endif
 
-/* Some Mac compilers merge all .h files incorrectly: */
-#if defined(__MWERKS__)||defined(applec)||defined(THINK_C)||defined(__SC__)
-#  define NO_DUMMY_DECL
+#ifdef Z_SOLO
+   typedef unsigned long z_size_t;
+#else
+#  define z_longlong long long
+#  if defined(NO_SIZE_T)
+     typedef unsigned NO_SIZE_T z_size_t;
+#  elif defined(STDC)
+#    include <stddef.h>
+     typedef size_t z_size_t;
+#  else
+     typedef unsigned long z_size_t;
+#  endif
+#  undef z_longlong
 #endif
 
 /* Maximum value for memLevel in deflateInit2 */
@@ -259,7 +281,7 @@
  Of course this will generally degrade compression (there's no free lunch).
 
    The memory requirements for inflate are (in bytes) 1 << windowBits
- that is, 32K for windowBits=15 (default value) plus a few kilobytes
+ that is, 32K for windowBits=15 (default value) plus about 7 kilobytes
  for small objects.
 */
 
@@ -341,7 +363,7 @@
 #  endif
 #endif
 
-#if defined (__BEOS__) || (defined(__OS2__) && defined(__declspec))
+#if defined (__BEOS__)
 #  ifdef ZLIB_DLL
 #    ifdef ZLIB_INTERNAL
 #      define ZEXPORT   __declspec(dllexport)
@@ -411,7 +433,7 @@ typedef uLong FAR uLongf;
    typedef unsigned long z_crc_t;
 #endif
 
-#ifdef HAVE_UNISTD_H    /* may be set to #if 1 by ./configure */
+#if !defined(_WIN32)
 #  define Z_HAVE_UNISTD_H
 #endif
 
diff --git a/modules/zlib/src/zlib.h b/modules/zlib/src/zlib.h
index b6ce7f1b0..99fd467f6 100644
--- a/modules/zlib/src/zlib.h
+++ b/modules/zlib/src/zlib.h
@@ -1,7 +1,7 @@
 /* zlib.h -- interface of the 'zlib' general purpose compression library
-  version 1.2.8, April 28th, 2013
+  version 1.2.11, January 15th, 2017
 
-  Copyright (C) 1995-2013 Jean-loup Gailly and Mark Adler
+  Copyright (C) 1995-2017 Jean-loup Gailly and Mark Adler
 
   This software is provided 'as-is', without any express or implied
   warranty.  In no event will the authors be held liable for any damages
@@ -37,11 +37,11 @@
 extern "C" {
 #endif
 
-#define ZLIB_VERSION "1.2.8"
-#define ZLIB_VERNUM 0x1280
+#define ZLIB_VERSION "1.2.11"
+#define ZLIB_VERNUM 0x12b0
 #define ZLIB_VER_MAJOR 1
 #define ZLIB_VER_MINOR 2
-#define ZLIB_VER_REVISION 8
+#define ZLIB_VER_REVISION 11
 #define ZLIB_VER_SUBREVISION 0
 
 /*
@@ -65,7 +65,8 @@ extern "C" {
   with "gz".  The gzip format is different from the zlib format.  gzip is a
   gzip wrapper, documented in RFC 1952, wrapped around a deflate stream.
 
-    This library can optionally read and write gzip streams in memory as well.
+    This library can optionally read and write gzip and raw deflate streams in
+  memory as well.
 
     The zlib format was designed to be compact and fast for use in memory
   and on communications channels.  The gzip format was designed for single-
@@ -74,7 +75,7 @@ extern "C" {
 
     The library does not install any signal handler.  The decoder checks
   the consistency of the compressed data, so the library should never crash
-  even in case of corrupted input.
+  even in the case of corrupted input.
 */
 
 typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size));
@@ -87,7 +88,7 @@ typedef struct z_stream_s {
     uInt     avail_in;  /* number of bytes available at next_in */
     uLong    total_in;  /* total number of input bytes read so far */
 
-    Bytef    *next_out; /* next output byte should be put there */
+    Bytef    *next_out; /* next output byte will go here */
     uInt     avail_out; /* remaining free space at next_out */
     uLong    total_out; /* total number of bytes output so far */
 
@@ -98,8 +99,9 @@ typedef struct z_stream_s {
     free_func  zfree;   /* used to free the internal state */
     voidpf     opaque;  /* private data object passed to zalloc and zfree */
 
-    int     data_type;  /* best guess about the data type: binary or text */
-    uLong   adler;      /* adler32 value of the uncompressed data */
+    int     data_type;  /* best guess about the data type: binary or text
+                           for deflate, or the decoding state for inflate */
+    uLong   adler;      /* Adler-32 or CRC-32 value of the uncompressed data */
     uLong   reserved;   /* reserved for future use */
 } z_stream;
 
@@ -142,7 +144,9 @@ typedef gz_header FAR *gz_headerp;
 
      zalloc must return Z_NULL if there is not enough memory for the object.
    If zlib is used in a multi-threaded application, zalloc and zfree must be
-   thread safe.
+   thread safe.  In that case, zlib is thread-safe.  When zalloc and zfree are
+   Z_NULL on entry to the initialization function, they are set to internal
+   routines that use the standard library functions malloc() and free().
 
      On 16-bit systems, the functions zalloc and zfree must be able to allocate
    exactly 65536 bytes, but will not be required to allocate more than this if
@@ -155,7 +159,7 @@ typedef gz_header FAR *gz_headerp;
 
      The fields total_in and total_out can be used for statistics or progress
    reports.  After compression, total_in holds the total size of the
-   uncompressed data and may be saved for use in the decompressor (particularly
+   uncompressed data and may be saved for use by the decompressor (particularly
    if the decompressor wants to decompress everything in a single step).
 */
 
@@ -200,7 +204,7 @@ typedef gz_header FAR *gz_headerp;
 #define Z_TEXT     1
 #define Z_ASCII    Z_TEXT   /* for compatibility with 1.2.2 and earlier */
 #define Z_UNKNOWN  2
-/* Possible values of the data_type field (though see inflate()) */
+/* Possible values of the data_type field for deflate() */
 
 #define Z_DEFLATED   8
 /* The deflate compression method (the only one supported in this version) */
@@ -258,11 +262,11 @@ ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush));
     enough room in the output buffer), next_in and avail_in are updated and
     processing will resume at this point for the next call of deflate().
 
-  - Provide more output starting at next_out and update next_out and avail_out
+  - Generate more output starting at next_out and update next_out and avail_out
     accordingly.  This action is forced if the parameter flush is non zero.
     Forcing flush frequently degrades the compression ratio, so this parameter
-    should be set only when necessary (in interactive applications).  Some
-    output may be provided even if flush is not set.
+    should be set only when necessary.  Some output may be provided even if
+    flush is zero.
 
     Before the call of deflate(), the application should ensure that at least
   one of the actions is possible, by providing more input and/or consuming more
@@ -271,7 +275,9 @@ ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush));
   output when it wants, for example when the output buffer is full (avail_out
   == 0), or after each call of deflate().  If deflate returns Z_OK and with
   zero avail_out, it must be called again after making room in the output
-  buffer because there might be more output pending.
+  buffer because there might be more output pending. See deflatePending(),
+  which can be used if desired to determine whether or not there is more ouput
+  in that case.
 
     Normally the parameter flush is set to Z_NO_FLUSH, which allows deflate to
   decide how much data to accumulate before producing output, in order to
@@ -292,8 +298,8 @@ ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush));
   input data so far will be available to the decompressor, as for Z_SYNC_FLUSH.
   This completes the current deflate block and follows it with an empty fixed
   codes block that is 10 bits long.  This assures that enough bytes are output
-  in order for the decompressor to finish the block before the empty fixed code
-  block.
+  in order for the decompressor to finish the block before the empty fixed
+  codes block.
 
     If flush is set to Z_BLOCK, a deflate block is completed and emitted, as
   for Z_SYNC_FLUSH, but the output is not aligned on a byte boundary, and up to
@@ -319,34 +325,38 @@ ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush));
 
     If the parameter flush is set to Z_FINISH, pending input is processed,
   pending output is flushed and deflate returns with Z_STREAM_END if there was
-  enough output space; if deflate returns with Z_OK, this function must be
-  called again with Z_FINISH and more output space (updated avail_out) but no
-  more input data, until it returns with Z_STREAM_END or an error.  After
-  deflate has returned Z_STREAM_END, the only possible operations on the stream
-  are deflateReset or deflateEnd.
-
-    Z_FINISH can be used immediately after deflateInit if all the compression
-  is to be done in a single step.  In this case, avail_out must be at least the
-  value returned by deflateBound (see below).  Then deflate is guaranteed to
-  return Z_STREAM_END.  If not enough output space is provided, deflate will
-  not return Z_STREAM_END, and it must be called again as described above.
-
-    deflate() sets strm->adler to the adler32 checksum of all input read
-  so far (that is, total_in bytes).
+  enough output space.  If deflate returns with Z_OK or Z_BUF_ERROR, this
+  function must be called again with Z_FINISH and more output space (updated
+  avail_out) but no more input data, until it returns with Z_STREAM_END or an
+  error.  After deflate has returned Z_STREAM_END, the only possible operations
+  on the stream are deflateReset or deflateEnd.
+
+    Z_FINISH can be used in the first deflate call after deflateInit if all the
+  compression is to be done in a single step.  In order to complete in one
+  call, avail_out must be at least the value returned by deflateBound (see
+  below).  Then deflate is guaranteed to return Z_STREAM_END.  If not enough
+  output space is provided, deflate will not return Z_STREAM_END, and it must
+  be called again as described above.
+
+    deflate() sets strm->adler to the Adler-32 checksum of all input read
+  so far (that is, total_in bytes).  If a gzip stream is being generated, then
+  strm->adler will be the CRC-32 checksum of the input read so far.  (See
+  deflateInit2 below.)
 
     deflate() may update strm->data_type if it can make a good guess about
-  the input data type (Z_BINARY or Z_TEXT).  In doubt, the data is considered
-  binary.  This field is only for information purposes and does not affect the
-  compression algorithm in any manner.
+  the input data type (Z_BINARY or Z_TEXT).  If in doubt, the data is
+  considered binary.  This field is only for information purposes and does not
+  affect the compression algorithm in any manner.
 
     deflate() returns Z_OK if some progress has been made (more input
   processed or more output produced), Z_STREAM_END if all input has been
   consumed and all output has been produced (only when flush is set to
   Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example
-  if next_in or next_out was Z_NULL), Z_BUF_ERROR if no progress is possible
-  (for example avail_in or avail_out was zero).  Note that Z_BUF_ERROR is not
-  fatal, and deflate() can be called again with more input and more output
-  space to continue compressing.
+  if next_in or next_out was Z_NULL or the state was inadvertently written over
+  by the application), or Z_BUF_ERROR if no progress is possible (for example
+  avail_in or avail_out was zero).  Note that Z_BUF_ERROR is not fatal, and
+  deflate() can be called again with more input and more output space to
+  continue compressing.
 */
 
 
@@ -369,23 +379,21 @@ ZEXTERN int ZEXPORT inflateInit OF((z_streamp strm));
 
      Initializes the internal stream state for decompression.  The fields
    next_in, avail_in, zalloc, zfree and opaque must be initialized before by
-   the caller.  If next_in is not Z_NULL and avail_in is large enough (the
-   exact value depends on the compression method), inflateInit determines the
-   compression method from the zlib header and allocates all data structures
-   accordingly; otherwise the allocation will be deferred to the first call of
-   inflate.  If zalloc and zfree are set to Z_NULL, inflateInit updates them to
-   use default allocation functions.
+   the caller.  In the current version of inflate, the provided input is not
+   read or consumed.  The allocation of a sliding window will be deferred to
+   the first call of inflate (if the decompression does not complete on the
+   first call).  If zalloc and zfree are set to Z_NULL, inflateInit updates
+   them to use default allocation functions.
 
      inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough
    memory, Z_VERSION_ERROR if the zlib library version is incompatible with the
    version assumed by the caller, or Z_STREAM_ERROR if the parameters are
    invalid, such as a null pointer to the structure.  msg is set to null if
-   there is no error message.  inflateInit does not perform any decompression
-   apart from possibly reading the zlib header if present: actual decompression
-   will be done by inflate().  (So next_in and avail_in may be modified, but
-   next_out and avail_out are unused and unchanged.) The current implementation
-   of inflateInit() does not process any header information -- that is deferred
-   until inflate() is called.
+   there is no error message.  inflateInit does not perform any decompression.
+   Actual decompression will be done by inflate().  So next_in, and avail_in,
+   next_out, and avail_out are unused and unchanged.  The current
+   implementation of inflateInit() does not process any header information --
+   that is deferred until inflate() is called.
 */
 
 
@@ -401,17 +409,20 @@ ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush));
 
   - Decompress more input starting at next_in and update next_in and avail_in
     accordingly.  If not all input can be processed (because there is not
-    enough room in the output buffer), next_in is updated and processing will
-    resume at this point for the next call of inflate().
+    enough room in the output buffer), then next_in and avail_in are updated
+    accordingly, and processing will resume at this point for the next call of
+    inflate().
 
-  - Provide more output starting at next_out and update next_out and avail_out
+  - Generate more output starting at next_out and update next_out and avail_out
     accordingly.  inflate() provides as much output as possible, until there is
     no more input data or no more space in the output buffer (see below about
     the flush parameter).
 
     Before the call of inflate(), the application should ensure that at least
   one of the actions is possible, by providing more input and/or consuming more
-  output, and updating the next_* and avail_* values accordingly.  The
+  output, and updating the next_* and avail_* values accordingly.  If the
+  caller of inflate() does not provide both available input and available
+  output space, it is possible that there will be no progress made.  The
   application can consume the uncompressed output when it wants, for example
   when the output buffer is full (avail_out == 0), or after each call of
   inflate().  If inflate returns Z_OK and with zero avail_out, it must be
@@ -428,7 +439,7 @@ ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush));
   gets to the end of that block, or when it runs out of data.
 
     The Z_BLOCK option assists in appending to or combining deflate streams.
-  Also to assist in this, on return inflate() will set strm->data_type to the
+  To assist in this, on return inflate() always sets strm->data_type to the
   number of unused bits in the last byte taken from strm->next_in, plus 64 if
   inflate() is currently decoding the last block in the deflate stream, plus
   128 if inflate() returned immediately after decoding an end-of-block code or
@@ -454,7 +465,7 @@ ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush));
   this case all pending input is processed and all pending output is flushed;
   avail_out must be large enough to hold all of the uncompressed data for the
   operation to complete.  (The size of the uncompressed data may have been
-  saved by the compressor for this purpose.) The use of Z_FINISH is not
+  saved by the compressor for this purpose.)  The use of Z_FINISH is not
   required to perform an inflation in one step.  However it may be used to
   inform inflate that a faster approach can be used for the single inflate()
   call.  Z_FINISH also informs inflate to not maintain a sliding window if the
@@ -476,32 +487,33 @@ ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush));
   chosen by the compressor and returns Z_NEED_DICT; otherwise it sets
   strm->adler to the Adler-32 checksum of all output produced so far (that is,
   total_out bytes) and returns Z_OK, Z_STREAM_END or an error code as described
-  below.  At the end of the stream, inflate() checks that its computed adler32
+  below.  At the end of the stream, inflate() checks that its computed Adler-32
   checksum is equal to that saved by the compressor and returns Z_STREAM_END
   only if the checksum is correct.
 
     inflate() can decompress and check either zlib-wrapped or gzip-wrapped
   deflate data.  The header type is detected automatically, if requested when
   initializing with inflateInit2().  Any information contained in the gzip
-  header is not retained, so applications that need that information should
-  instead use raw inflate, see inflateInit2() below, or inflateBack() and
-  perform their own processing of the gzip header and trailer.  When processing
+  header is not retained unless inflateGetHeader() is used.  When processing
   gzip-wrapped deflate data, strm->adler32 is set to the CRC-32 of the output
-  producted so far.  The CRC-32 is checked against the gzip trailer.
+  produced so far.  The CRC-32 is checked against the gzip trailer, as is the
+  uncompressed length, modulo 2^32.
 
     inflate() returns Z_OK if some progress has been made (more input processed
   or more output produced), Z_STREAM_END if the end of the compressed data has
   been reached and all uncompressed output has been produced, Z_NEED_DICT if a
   preset dictionary is needed at this point, Z_DATA_ERROR if the input data was
   corrupted (input stream not conforming to the zlib format or incorrect check
-  value), Z_STREAM_ERROR if the stream structure was inconsistent (for example
-  next_in or next_out was Z_NULL), Z_MEM_ERROR if there was not enough memory,
-  Z_BUF_ERROR if no progress is possible or if there was not enough room in the
-  output buffer when Z_FINISH is used.  Note that Z_BUF_ERROR is not fatal, and
+  value, in which case strm->msg points to a string with a more specific
+  error), Z_STREAM_ERROR if the stream structure was inconsistent (for example
+  next_in or next_out was Z_NULL, or the state was inadvertently written over
+  by the application), Z_MEM_ERROR if there was not enough memory, Z_BUF_ERROR
+  if no progress was possible or if there was not enough room in the output
+  buffer when Z_FINISH is used.  Note that Z_BUF_ERROR is not fatal, and
   inflate() can be called again with more input and more output space to
   continue decompressing.  If Z_DATA_ERROR is returned, the application may
   then call inflateSync() to look for a good compression block if a partial
-  recovery of the data is desired.
+  recovery of the data is to be attempted.
 */
 
 
@@ -511,9 +523,8 @@ ZEXTERN int ZEXPORT inflateEnd OF((z_streamp strm));
    This function discards any unprocessed input and does not flush any pending
    output.
 
-     inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state
-   was inconsistent.  In the error case, msg may be set but then points to a
-   static string (which must not be deallocated).
+     inflateEnd returns Z_OK if success, or Z_STREAM_ERROR if the stream state
+   was inconsistent.
 */
 
 
@@ -544,16 +555,29 @@ ZEXTERN int ZEXPORT deflateInit2 OF((z_streamp strm,
    compression at the expense of memory usage.  The default value is 15 if
    deflateInit is used instead.
 
+     For the current implementation of deflate(), a windowBits value of 8 (a
+   window size of 256 bytes) is not supported.  As a result, a request for 8
+   will result in 9 (a 512-byte window).  In that case, providing 8 to
+   inflateInit2() will result in an error when the zlib header with 9 is
+   checked against the initialization of inflate().  The remedy is to not use 8
+   with deflateInit2() with this initialization, or at least in that case use 9
+   with inflateInit2().
+
      windowBits can also be -8..-15 for raw deflate.  In this case, -windowBits
    determines the window size.  deflate() will then generate raw deflate data
-   with no zlib header or trailer, and will not compute an adler32 check value.
+   with no zlib header or trailer, and will not compute a check value.
 
      windowBits can also be greater than 15 for optional gzip encoding.  Add
    16 to windowBits to write a simple gzip header and trailer around the
    compressed data instead of a zlib wrapper.  The gzip header will have no
    file name, no extra data, no comment, no modification time (set to zero), no
-   header crc, and the operating system will be set to 255 (unknown).  If a
-   gzip stream is being written, strm->adler is a crc32 instead of an adler32.
+   header crc, and the operating system will be set to the appropriate value,
+   if the operating system was determined at compile time.  If a gzip stream is
+   being written, strm->adler is a CRC-32 instead of an Adler-32.
+
+     For raw deflate or gzip encoding, a request for a 256-byte window is
+   rejected as invalid, since only the zlib header provides a means of
+   transmitting the window size to the decompressor.
 
      The memLevel parameter specifies how much memory should be allocated
    for the internal compression state.  memLevel=1 uses minimum memory but is
@@ -614,12 +638,12 @@ ZEXTERN int ZEXPORT deflateSetDictionary OF((z_streamp strm,
    addition, the current implementation of deflate will use at most the window
    size minus 262 bytes of the provided dictionary.
 
-     Upon return of this function, strm->adler is set to the adler32 value
+     Upon return of this function, strm->adler is set to the Adler-32 value
    of the dictionary; the decompressor may later use this value to determine
-   which dictionary has been used by the compressor.  (The adler32 value
+   which dictionary has been used by the compressor.  (The Adler-32 value
    applies to the whole dictionary even if only a subset of the dictionary is
    actually used by the compressor.) If a raw deflate was requested, then the
-   adler32 value is not computed and strm->adler is not set.
+   Adler-32 value is not computed and strm->adler is not set.
 
      deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a
    parameter is invalid (e.g.  dictionary being Z_NULL) or the stream state is
@@ -628,6 +652,28 @@ ZEXTERN int ZEXPORT deflateSetDictionary OF((z_streamp strm,
    not perform any compression: this will be done by deflate().
 */
 
+ZEXTERN int ZEXPORT deflateGetDictionary OF((z_streamp strm,
+                                             Bytef *dictionary,
+                                             uInt  *dictLength));
+/*
+     Returns the sliding dictionary being maintained by deflate.  dictLength is
+   set to the number of bytes in the dictionary, and that many bytes are copied
+   to dictionary.  dictionary must have enough space, where 32768 bytes is
+   always enough.  If deflateGetDictionary() is called with dictionary equal to
+   Z_NULL, then only the dictionary length is returned, and nothing is copied.
+   Similary, if dictLength is Z_NULL, then it is not set.
+
+     deflateGetDictionary() may return a length less than the window size, even
+   when more than the window size in input has been provided. It may return up
+   to 258 bytes less in that case, due to how zlib's implementation of deflate
+   manages the sliding window and lookahead for matches, where matches can be
+   up to 258 bytes long. If the application needs the last window-size bytes of
+   input, then that would need to be saved by the application outside of zlib.
+
+     deflateGetDictionary returns Z_OK on success, or Z_STREAM_ERROR if the
+   stream state is inconsistent.
+*/
+
 ZEXTERN int ZEXPORT deflateCopy OF((z_streamp dest,
                                     z_streamp source));
 /*
@@ -648,10 +694,10 @@ ZEXTERN int ZEXPORT deflateCopy OF((z_streamp dest,
 
 ZEXTERN int ZEXPORT deflateReset OF((z_streamp strm));
 /*
-     This function is equivalent to deflateEnd followed by deflateInit,
-   but does not free and reallocate all the internal compression state.  The
-   stream will keep the same compression level and any other attributes that
-   may have been set by deflateInit2.
+     This function is equivalent to deflateEnd followed by deflateInit, but
+   does not free and reallocate the internal compression state.  The stream
+   will leave the compression level and any other attributes that may have been
+   set unchanged.
 
      deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
    stream state was inconsistent (such as zalloc or state being Z_NULL).
@@ -662,20 +708,36 @@ ZEXTERN int ZEXPORT deflateParams OF((z_streamp strm,
                                       int strategy));
 /*
      Dynamically update the compression level and compression strategy.  The
-   interpretation of level and strategy is as in deflateInit2.  This can be
+   interpretation of level and strategy is as in deflateInit2().  This can be
    used to switch between compression and straight copy of the input data, or
    to switch to a different kind of input data requiring a different strategy.
-   If the compression level is changed, the input available so far is
-   compressed with the old level (and may be flushed); the new level will take
-   effect only at the next call of deflate().
-
-     Before the call of deflateParams, the stream state must be set as for
-   a call of deflate(), since the currently available input may have to be
-   compressed and flushed.  In particular, strm->avail_out must be non-zero.
-
-     deflateParams returns Z_OK if success, Z_STREAM_ERROR if the source
-   stream state was inconsistent or if a parameter was invalid, Z_BUF_ERROR if
-   strm->avail_out was zero.
+   If the compression approach (which is a function of the level) or the
+   strategy is changed, and if any input has been consumed in a previous
+   deflate() call, then the input available so far is compressed with the old
+   level and strategy using deflate(strm, Z_BLOCK).  There are three approaches
+   for the compression levels 0, 1..3, and 4..9 respectively.  The new level
+   and strategy will take effect at the next call of deflate().
+
+     If a deflate(strm, Z_BLOCK) is performed by deflateParams(), and it does
+   not have enough output space to complete, then the parameter change will not
+   take effect.  In this case, deflateParams() can be called again with the
+   same parameters and more output space to try again.
+
+     In order to assure a change in the parameters on the first try, the
+   deflate stream should be flushed using deflate() with Z_BLOCK or other flush
+   request until strm.avail_out is not zero, before calling deflateParams().
+   Then no more input data should be provided before the deflateParams() call.
+   If this is done, the old level and strategy will be applied to the data
+   compressed before deflateParams(), and the new level and strategy will be
+   applied to the the data compressed after deflateParams().
+
+     deflateParams returns Z_OK on success, Z_STREAM_ERROR if the source stream
+   state was inconsistent or if a parameter was invalid, or Z_BUF_ERROR if
+   there was not enough output space to complete the compression of the
+   available input data before a change in the strategy or approach.  Note that
+   in the case of a Z_BUF_ERROR, the parameters are not changed.  A return
+   value of Z_BUF_ERROR is not fatal, in which case deflateParams() can be
+   retried with more output space.
 */
 
 ZEXTERN int ZEXPORT deflateTune OF((z_streamp strm,
@@ -793,7 +855,7 @@ ZEXTERN int ZEXPORT inflateInit2 OF((z_streamp strm,
    is for use with other formats that use the deflate compressed data format
    such as zip.  Those formats provide their own check values.  If a custom
    format is developed using the raw deflate format for compressed data, it is
-   recommended that a check value such as an adler32 or a crc32 be applied to
+   recommended that a check value such as an Adler-32 or a CRC-32 be applied to
    the uncompressed data as is done in the zlib, gzip, and zip formats.  For
    most applications, the zlib format should be used as is.  Note that comments
    above on the use in deflateInit2() applies to the magnitude of windowBits.
@@ -802,7 +864,10 @@ ZEXTERN int ZEXPORT inflateInit2 OF((z_streamp strm,
    32 to windowBits to enable zlib and gzip decoding with automatic header
    detection, or add 16 to decode only the gzip format (the zlib format will
    return a Z_DATA_ERROR).  If a gzip stream is being decoded, strm->adler is a
-   crc32 instead of an adler32.
+   CRC-32 instead of an Adler-32.  Unlike the gunzip utility and gzread() (see
+   below), inflate() will not automatically decode concatenated gzip streams.
+   inflate() will return Z_STREAM_END at the end of the gzip stream.  The state
+   would need to be reset to continue decoding a subsequent gzip stream.
 
      inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
    memory, Z_VERSION_ERROR if the zlib library version is incompatible with the
@@ -823,7 +888,7 @@ ZEXTERN int ZEXPORT inflateSetDictionary OF((z_streamp strm,
      Initializes the decompression dictionary from the given uncompressed byte
    sequence.  This function must be called immediately after a call of inflate,
    if that call returned Z_NEED_DICT.  The dictionary chosen by the compressor
-   can be determined from the adler32 value returned by that call of inflate.
+   can be determined from the Adler-32 value returned by that call of inflate.
    The compressor and decompressor must use exactly the same dictionary (see
    deflateSetDictionary).  For raw inflate, this function can be called at any
    time to set the dictionary.  If the provided dictionary is smaller than the
@@ -834,7 +899,7 @@ ZEXTERN int ZEXPORT inflateSetDictionary OF((z_streamp strm,
      inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a
    parameter is invalid (e.g.  dictionary being Z_NULL) or the stream state is
    inconsistent, Z_DATA_ERROR if the given dictionary doesn't match the
-   expected one (incorrect adler32 value).  inflateSetDictionary does not
+   expected one (incorrect Adler-32 value).  inflateSetDictionary does not
    perform any decompression: this will be done by subsequent calls of
    inflate().
 */
@@ -892,7 +957,7 @@ ZEXTERN int ZEXPORT inflateCopy OF((z_streamp dest,
 ZEXTERN int ZEXPORT inflateReset OF((z_streamp strm));
 /*
      This function is equivalent to inflateEnd followed by inflateInit,
-   but does not free and reallocate all the internal decompression state.  The
+   but does not free and reallocate the internal decompression state.  The
    stream will keep attributes that may have been set by inflateInit2.
 
      inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
@@ -904,7 +969,9 @@ ZEXTERN int ZEXPORT inflateReset2 OF((z_streamp strm,
 /*
      This function is the same as inflateReset, but it also permits changing
    the wrap and window size requests.  The windowBits parameter is interpreted
-   the same as it is for inflateInit2.
+   the same as it is for inflateInit2.  If the window size is changed, then the
+   memory allocated for the window is freed, and the window will be reallocated
+   by inflate() if needed.
 
      inflateReset2 returns Z_OK if success, or Z_STREAM_ERROR if the source
    stream state was inconsistent (such as zalloc or state being Z_NULL), or if
@@ -956,7 +1023,7 @@ ZEXTERN long ZEXPORT inflateMark OF((z_streamp strm));
    location in the input stream can be determined from avail_in and data_type
    as noted in the description for the Z_BLOCK flush parameter for inflate.
 
-     inflateMark returns the value noted above or -1 << 16 if the provided
+     inflateMark returns the value noted above, or -65536 if the provided
    source stream state was inconsistent.
 */
 
@@ -1048,9 +1115,9 @@ ZEXTERN int ZEXPORT inflateBack OF((z_streamp strm,
    This routine would normally be used in a utility that reads zip or gzip
    files and writes out uncompressed files.  The utility would decode the
    header and process the trailer on its own, hence this routine expects only
-   the raw deflate stream to decompress.  This is different from the normal
-   behavior of inflate(), which expects either a zlib or gzip header and
-   trailer around the deflate stream.
+   the raw deflate stream to decompress.  This is different from the default
+   behavior of inflate(), which expects a zlib header and trailer around the
+   deflate stream.
 
      inflateBack() uses two subroutines supplied by the caller that are then
    called by inflateBack() for input and output.  inflateBack() calls those
@@ -1059,12 +1126,12 @@ ZEXTERN int ZEXPORT inflateBack OF((z_streamp strm,
    parameters and return types are defined above in the in_func and out_func
    typedefs.  inflateBack() will call in(in_desc, &buf) which should return the
    number of bytes of provided input, and a pointer to that input in buf.  If
-   there is no input available, in() must return zero--buf is ignored in that
-   case--and inflateBack() will return a buffer error.  inflateBack() will call
-   out(out_desc, buf, len) to write the uncompressed data buf[0..len-1].  out()
-   should return zero on success, or non-zero on failure.  If out() returns
-   non-zero, inflateBack() will return with an error.  Neither in() nor out()
-   are permitted to change the contents of the window provided to
+   there is no input available, in() must return zero -- buf is ignored in that
+   case -- and inflateBack() will return a buffer error.  inflateBack() will
+   call out(out_desc, buf, len) to write the uncompressed data buf[0..len-1].
+   out() should return zero on success, or non-zero on failure.  If out()
+   returns non-zero, inflateBack() will return with an error.  Neither in() nor
+   out() are permitted to change the contents of the window provided to
    inflateBackInit(), which is also the buffer that out() uses to write from.
    The length written by out() will be at most the window size.  Any non-zero
    amount of input may be provided by in().
@@ -1092,7 +1159,7 @@ ZEXTERN int ZEXPORT inflateBack OF((z_streamp strm,
    using strm->next_in which will be Z_NULL only if in() returned an error.  If
    strm->next_in is not Z_NULL, then the Z_BUF_ERROR was due to out() returning
    non-zero.  (in() will always be called before out(), so strm->next_in is
-   assured to be defined if out() returns non-zero.) Note that inflateBack()
+   assured to be defined if out() returns non-zero.)  Note that inflateBack()
    cannot return Z_OK.
 */
 
@@ -1114,7 +1181,7 @@ ZEXTERN uLong ZEXPORT zlibCompileFlags OF((void));
      7.6: size of z_off_t
 
     Compiler, assembler, and debug options:
-     8: DEBUG
+     8: ZLIB_DEBUG
      9: ASMV or ASMINF -- use ASM code
      10: ZLIB_WINAPI -- exported functions use the WINAPI calling convention
      11: 0 (reserved)
@@ -1164,7 +1231,8 @@ ZEXTERN int ZEXPORT compress OF((Bytef *dest,   uLongf *destLen,
    the byte length of the source buffer.  Upon entry, destLen is the total size
    of the destination buffer, which must be at least the value returned by
    compressBound(sourceLen).  Upon exit, destLen is the actual size of the
-   compressed buffer.
+   compressed data.  compress() is equivalent to compress2() with a level
+   parameter of Z_DEFAULT_COMPRESSION.
 
      compress returns Z_OK if success, Z_MEM_ERROR if there was not
    enough memory, Z_BUF_ERROR if there was not enough room in the output
@@ -1180,7 +1248,7 @@ ZEXTERN int ZEXPORT compress2 OF((Bytef *dest,   uLongf *destLen,
    length of the source buffer.  Upon entry, destLen is the total size of the
    destination buffer, which must be at least the value returned by
    compressBound(sourceLen).  Upon exit, destLen is the actual size of the
-   compressed buffer.
+   compressed data.
 
      compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
    memory, Z_BUF_ERROR if there was not enough room in the output buffer,
@@ -1203,7 +1271,7 @@ ZEXTERN int ZEXPORT uncompress OF((Bytef *dest,   uLongf *destLen,
    uncompressed data.  (The size of the uncompressed data must have been saved
    previously by the compressor and transmitted to the decompressor by some
    mechanism outside the scope of this compression library.) Upon exit, destLen
-   is the actual size of the uncompressed buffer.
+   is the actual size of the uncompressed data.
 
      uncompress returns Z_OK if success, Z_MEM_ERROR if there was not
    enough memory, Z_BUF_ERROR if there was not enough room in the output
@@ -1212,6 +1280,14 @@ ZEXTERN int ZEXPORT uncompress OF((Bytef *dest,   uLongf *destLen,
    buffer with the uncompressed data up to that point.
 */
 
+ZEXTERN int ZEXPORT uncompress2 OF((Bytef *dest,   uLongf *destLen,
+                                    const Bytef *source, uLong *sourceLen));
+/*
+     Same as uncompress, except that sourceLen is a pointer, where the
+   length of the source is *sourceLen.  On return, *sourceLen is the number of
+   source bytes consumed.
+*/
+
                         /* gzip file access functions */
 
 /*
@@ -1290,10 +1366,9 @@ ZEXTERN int ZEXPORT gzbuffer OF((gzFile file, unsigned size));
    default buffer size is 8192 bytes.  This function must be called after
    gzopen() or gzdopen(), and before any other calls that read or write the
    file.  The buffer memory allocation is always deferred to the first read or
-   write.  Two buffers are allocated, either both of the specified size when
-   writing, or one of the specified size and the other twice that size when
-   reading.  A larger buffer size of, for example, 64K or 128K bytes will
-   noticeably increase the speed of decompression (reading).
+   write.  Three times that size in buffer space is allocated.  A larger buffer
+   size of, for example, 64K or 128K bytes will noticeably increase the speed
+   of decompression (reading).
 
      The new buffer size also affects the maximum length for gzprintf().
 
@@ -1304,10 +1379,12 @@ ZEXTERN int ZEXPORT gzbuffer OF((gzFile file, unsigned size));
 ZEXTERN int ZEXPORT gzsetparams OF((gzFile file, int level, int strategy));
 /*
      Dynamically update the compression level or strategy.  See the description
-   of deflateInit2 for the meaning of these parameters.
+   of deflateInit2 for the meaning of these parameters.  Previously provided
+   data is flushed before the parameter change.
 
-     gzsetparams returns Z_OK if success, or Z_STREAM_ERROR if the file was not
-   opened for writing.
+     gzsetparams returns Z_OK if success, Z_STREAM_ERROR if the file was not
+   opened for writing, Z_ERRNO if there is an error writing the flushed data,
+   or Z_MEM_ERROR if there is a memory allocation error.
 */
 
 ZEXTERN int ZEXPORT gzread OF((gzFile file, voidp buf, unsigned len));
@@ -1335,7 +1412,35 @@ ZEXTERN int ZEXPORT gzread OF((gzFile file, voidp buf, unsigned len));
    case.
 
      gzread returns the number of uncompressed bytes actually read, less than
-   len for end of file, or -1 for error.
+   len for end of file, or -1 for error.  If len is too large to fit in an int,
+   then nothing is read, -1 is returned, and the error state is set to
+   Z_STREAM_ERROR.
+*/
+
+ZEXTERN z_size_t ZEXPORT gzfread OF((voidp buf, z_size_t size, z_size_t nitems,
+                                     gzFile file));
+/*
+     Read up to nitems items of size size from file to buf, otherwise operating
+   as gzread() does.  This duplicates the interface of stdio's fread(), with
+   size_t request and return types.  If the library defines size_t, then
+   z_size_t is identical to size_t.  If not, then z_size_t is an unsigned
+   integer type that can contain a pointer.
+
+     gzfread() returns the number of full items read of size size, or zero if
+   the end of the file was reached and a full item could not be read, or if
+   there was an error.  gzerror() must be consulted if zero is returned in
+   order to determine if there was an error.  If the multiplication of size and
+   nitems overflows, i.e. the product does not fit in a z_size_t, then nothing
+   is read, zero is returned, and the error state is set to Z_STREAM_ERROR.
+
+     In the event that the end of file is reached and only a partial item is
+   available at the end, i.e. the remaining uncompressed data length is not a
+   multiple of size, then the final partial item is nevetheless read into buf
+   and the end-of-file flag is set.  The length of the partial item read is not
+   provided, but could be inferred from the result of gztell().  This behavior
+   is the same as the behavior of fread() implementations in common libraries,
+   but it prevents the direct use of gzfread() to read a concurrently written
+   file, reseting and retrying on end-of-file, when size is not 1.
 */
 
 ZEXTERN int ZEXPORT gzwrite OF((gzFile file,
@@ -1346,19 +1451,33 @@ ZEXTERN int ZEXPORT gzwrite OF((gzFile file,
    error.
 */
 
+ZEXTERN z_size_t ZEXPORT gzfwrite OF((voidpc buf, z_size_t size,
+                                      z_size_t nitems, gzFile file));
+/*
+     gzfwrite() writes nitems items of size size from buf to file, duplicating
+   the interface of stdio's fwrite(), with size_t request and return types.  If
+   the library defines size_t, then z_size_t is identical to size_t.  If not,
+   then z_size_t is an unsigned integer type that can contain a pointer.
+
+     gzfwrite() returns the number of full items written of size size, or zero
+   if there was an error.  If the multiplication of size and nitems overflows,
+   i.e. the product does not fit in a z_size_t, then nothing is written, zero
+   is returned, and the error state is set to Z_STREAM_ERROR.
+*/
+
 ZEXTERN int ZEXPORTVA gzprintf Z_ARG((gzFile file, const char *format, ...));
 /*
      Converts, formats, and writes the arguments to the compressed file under
    control of the format string, as in fprintf.  gzprintf returns the number of
-   uncompressed bytes actually written, or 0 in case of error.  The number of
-   uncompressed bytes written is limited to 8191, or one less than the buffer
-   size given to gzbuffer().  The caller should assure that this limit is not
-   exceeded.  If it is exceeded, then gzprintf() will return an error (0) with
-   nothing written.  In this case, there may also be a buffer overflow with
-   unpredictable consequences, which is possible only if zlib was compiled with
-   the insecure functions sprintf() or vsprintf() because the secure snprintf()
-   or vsnprintf() functions were not available.  This can be determined using
-   zlibCompileFlags().
+   uncompressed bytes actually written, or a negative zlib error code in case
+   of error.  The number of uncompressed bytes written is limited to 8191, or
+   one less than the buffer size given to gzbuffer().  The caller should assure
+   that this limit is not exceeded.  If it is exceeded, then gzprintf() will
+   return an error (0) with nothing written.  In this case, there may also be a
+   buffer overflow with unpredictable consequences, which is possible only if
+   zlib was compiled with the insecure functions sprintf() or vsprintf()
+   because the secure snprintf() or vsnprintf() functions were not available.
+   This can be determined using zlibCompileFlags().
 */
 
 ZEXTERN int ZEXPORT gzputs OF((gzFile file, const char *s));
@@ -1418,7 +1537,7 @@ ZEXTERN int ZEXPORT gzflush OF((gzFile file, int flush));
      If the flush parameter is Z_FINISH, the remaining data is written and the
    gzip stream is completed in the output.  If gzwrite() is called again, a new
    gzip stream will be started in the output.  gzread() is able to read such
-   concatented gzip streams.
+   concatenated gzip streams.
 
      gzflush should be called only when strictly necessary because it will
    degrade compression if called too often.
@@ -1572,7 +1691,7 @@ ZEXTERN uLong ZEXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len));
    return the updated checksum.  If buf is Z_NULL, this function returns the
    required initial value for the checksum.
 
-     An Adler-32 checksum is almost as reliable as a CRC32 but can be computed
+     An Adler-32 checksum is almost as reliable as a CRC-32 but can be computed
    much faster.
 
    Usage example:
@@ -1585,6 +1704,12 @@ ZEXTERN uLong ZEXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len));
      if (adler != original_adler) error();
 */
 
+ZEXTERN uLong ZEXPORT adler32_z OF((uLong adler, const Bytef *buf,
+                                    z_size_t len));
+/*
+     Same as adler32(), but with a size_t length.
+*/
+
 /*
 ZEXTERN uLong ZEXPORT adler32_combine OF((uLong adler1, uLong adler2,
                                           z_off_t len2));
@@ -1614,6 +1739,12 @@ ZEXTERN uLong ZEXPORT crc32   OF((uLong crc, const Bytef *buf, uInt len));
      if (crc != original_crc) error();
 */
 
+ZEXTERN uLong ZEXPORT crc32_z OF((uLong adler, const Bytef *buf,
+                                  z_size_t len));
+/*
+     Same as crc32(), but with a size_t length.
+*/
+
 /*
 ZEXTERN uLong ZEXPORT crc32_combine OF((uLong crc1, uLong crc2, z_off_t len2));
 
@@ -1644,19 +1775,35 @@ ZEXTERN int ZEXPORT inflateBackInit_ OF((z_streamp strm, int windowBits,
                                          unsigned char FAR *window,
                                          const char *version,
                                          int stream_size));
-#define deflateInit(strm, level) \
-        deflateInit_((strm), (level), ZLIB_VERSION, (int)sizeof(z_stream))
-#define inflateInit(strm) \
-        inflateInit_((strm), ZLIB_VERSION, (int)sizeof(z_stream))
-#define deflateInit2(strm, level, method, windowBits, memLevel, strategy) \
-        deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\
-                      (strategy), ZLIB_VERSION, (int)sizeof(z_stream))
-#define inflateInit2(strm, windowBits) \
-        inflateInit2_((strm), (windowBits), ZLIB_VERSION, \
-                      (int)sizeof(z_stream))
-#define inflateBackInit(strm, windowBits, window) \
-        inflateBackInit_((strm), (windowBits), (window), \
-                      ZLIB_VERSION, (int)sizeof(z_stream))
+#ifdef Z_PREFIX_SET
+#  define z_deflateInit(strm, level) \
+          deflateInit_((strm), (level), ZLIB_VERSION, (int)sizeof(z_stream))
+#  define z_inflateInit(strm) \
+          inflateInit_((strm), ZLIB_VERSION, (int)sizeof(z_stream))
+#  define z_deflateInit2(strm, level, method, windowBits, memLevel, strategy) \
+          deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\
+                        (strategy), ZLIB_VERSION, (int)sizeof(z_stream))
+#  define z_inflateInit2(strm, windowBits) \
+          inflateInit2_((strm), (windowBits), ZLIB_VERSION, \
+                        (int)sizeof(z_stream))
+#  define z_inflateBackInit(strm, windowBits, window) \
+          inflateBackInit_((strm), (windowBits), (window), \
+                           ZLIB_VERSION, (int)sizeof(z_stream))
+#else
+#  define deflateInit(strm, level) \
+          deflateInit_((strm), (level), ZLIB_VERSION, (int)sizeof(z_stream))
+#  define inflateInit(strm) \
+          inflateInit_((strm), ZLIB_VERSION, (int)sizeof(z_stream))
+#  define deflateInit2(strm, level, method, windowBits, memLevel, strategy) \
+          deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\
+                        (strategy), ZLIB_VERSION, (int)sizeof(z_stream))
+#  define inflateInit2(strm, windowBits) \
+          inflateInit2_((strm), (windowBits), ZLIB_VERSION, \
+                        (int)sizeof(z_stream))
+#  define inflateBackInit(strm, windowBits, window) \
+          inflateBackInit_((strm), (windowBits), (window), \
+                           ZLIB_VERSION, (int)sizeof(z_stream))
+#endif
 
 #ifndef Z_SOLO
 
@@ -1676,11 +1823,15 @@ ZEXTERN int ZEXPORT gzgetc_ OF((gzFile file));  /* backward compatibility */
 #ifdef Z_PREFIX_SET
 #  undef z_gzgetc
 #  define z_gzgetc(g) \
-          ((g)->have ? ((g)->have--, (g)->pos++, *((g)->next)++) : gzgetc(g))
+          ((g)->have ? ((g)->have--, (g)->pos++, *((g)->next)++) : (gzgetc)(g))
+#elif defined(Z_CR_PREFIX_SET)
+#    undef gzgetc
+#    define gzgetc(g) \
+          ((g)->have ? ((g)->have--, (g)->pos++, *((g)->next)++) \
+                     : (Cr_z_gzgetc)(g))
 #else
-#  undef gzgetc
 #  define gzgetc(g) \
-          ((g)->have ? ((g)->have--, (g)->pos++, *((g)->next)++) : gzgetc(g))
+          ((g)->have ? ((g)->have--, (g)->pos++, *((g)->next)++) : (gzgetc)(g))
 #endif
 
 /* provide 64-bit offset functions if _LARGEFILE64_SOURCE defined, and/or
@@ -1707,11 +1858,29 @@ ZEXTERN int ZEXPORT gzgetc_ OF((gzFile file));  /* backward compatibility */
 #    define z_adler32_combine z_adler32_combine64
 #    define z_crc32_combine z_crc32_combine64
 #  else
+#    ifdef gzopen
+#      undef gzopen
+#    endif
 #    define gzopen gzopen64
+#    ifdef gzseek
+#      undef gzseek
+#    endif
 #    define gzseek gzseek64
+#    ifdef gztell
+#      undef gztell
+#    endif
 #    define gztell gztell64
+#    ifdef gzoffset
+#      undef gzoffset
+#    endif
 #    define gzoffset gzoffset64
+#    ifdef adler32_combine
+#      undef adler32_combine
+#    endif
 #    define adler32_combine adler32_combine64
+#    ifdef crc32_combine
+#      undef crc32_combine
+#    endif
 #    define crc32_combine crc32_combine64
 #  endif
 #  ifndef Z_LARGE64
@@ -1738,19 +1907,16 @@ ZEXTERN int ZEXPORT gzgetc_ OF((gzFile file));  /* backward compatibility */
 
 #endif /* !Z_SOLO */
 
-/* hack for buggy compilers */
-#if !defined(ZUTIL_H) && !defined(NO_DUMMY_DECL)
-    struct internal_state {int dummy;};
-#endif
-
 /* undocumented functions */
 ZEXTERN const char   * ZEXPORT zError           OF((int));
 ZEXTERN int            ZEXPORT inflateSyncPoint OF((z_streamp));
 ZEXTERN const z_crc_t FAR * ZEXPORT get_crc_table    OF((void));
 ZEXTERN int            ZEXPORT inflateUndermine OF((z_streamp, int));
+ZEXTERN int            ZEXPORT inflateValidate OF((z_streamp, int));
+ZEXTERN unsigned long  ZEXPORT inflateCodesUsed OF ((z_streamp));
 ZEXTERN int            ZEXPORT inflateResetKeep OF((z_streamp));
 ZEXTERN int            ZEXPORT deflateResetKeep OF((z_streamp));
-#if defined(_WIN32) && !defined(Z_SOLO)
+#if (defined(_WIN32) || defined(__CYGWIN__)) && !defined(Z_SOLO)
 ZEXTERN gzFile         ZEXPORT gzopen_w OF((const wchar_t *path,
                                             const char *mode));
 #endif
diff --git a/modules/zlib/src/zutil.c b/modules/zlib/src/zutil.c
index 23d2ebef0..a76c6b0c7 100644
--- a/modules/zlib/src/zutil.c
+++ b/modules/zlib/src/zutil.c
@@ -1,5 +1,5 @@
 /* zutil.c -- target dependent utility functions for the compression library
- * Copyright (C) 1995-2005, 2010, 2011, 2012 Jean-loup Gailly.
+ * Copyright (C) 1995-2017 Jean-loup Gailly
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -10,21 +10,18 @@
 #  include "gzguts.h"
 #endif
 
-#ifndef NO_DUMMY_DECL
-struct internal_state      {int dummy;}; /* for buggy compilers */
-#endif
-
 z_const char * const z_errmsg[10] = {
-"need dictionary",     /* Z_NEED_DICT       2  */
-"stream end",          /* Z_STREAM_END      1  */
-"",                    /* Z_OK              0  */
-"file error",          /* Z_ERRNO         (-1) */
-"stream error",        /* Z_STREAM_ERROR  (-2) */
-"data error",          /* Z_DATA_ERROR    (-3) */
-"insufficient memory", /* Z_MEM_ERROR     (-4) */
-"buffer error",        /* Z_BUF_ERROR     (-5) */
-"incompatible version",/* Z_VERSION_ERROR (-6) */
-""};
+    (z_const char *)"need dictionary",     /* Z_NEED_DICT       2  */
+    (z_const char *)"stream end",          /* Z_STREAM_END      1  */
+    (z_const char *)"",                    /* Z_OK              0  */
+    (z_const char *)"file error",          /* Z_ERRNO         (-1) */
+    (z_const char *)"stream error",        /* Z_STREAM_ERROR  (-2) */
+    (z_const char *)"data error",          /* Z_DATA_ERROR    (-3) */
+    (z_const char *)"insufficient memory", /* Z_MEM_ERROR     (-4) */
+    (z_const char *)"buffer error",        /* Z_BUF_ERROR     (-5) */
+    (z_const char *)"incompatible version",/* Z_VERSION_ERROR (-6) */
+    (z_const char *)""
+};
 
 
 const char * ZEXPORT zlibVersion()
@@ -61,7 +58,7 @@ uLong ZEXPORT zlibCompileFlags()
     case 8:     flags += 2 << 6;        break;
     default:    flags += 3 << 6;
     }
-#ifdef DEBUG
+#ifdef ZLIB_DEBUG
     flags += 1 << 8;
 #endif
 #if defined(ASMV) || defined(ASMINF)
@@ -115,8 +112,8 @@ uLong ZEXPORT zlibCompileFlags()
     return flags;
 }
 
-#ifdef DEBUG
-
+#ifdef ZLIB_DEBUG
+#include <stdlib.h>
 #  ifndef verbose
 #    define verbose 0
 #  endif
@@ -219,9 +216,11 @@ local ptr_table table[MAX_PTR];
 
 voidpf ZLIB_INTERNAL zcalloc (voidpf opaque, unsigned items, unsigned size)
 {
-    voidpf buf = opaque; /* just to make some compilers happy */
+    voidpf buf;
     ulg bsize = (ulg)items*size;
 
+    (void)opaque;
+
     /* If we allocate less than 65520 bytes, we assume that farmalloc
      * will return a usable pointer which doesn't have to be normalized.
      */
@@ -244,6 +243,9 @@ voidpf ZLIB_INTERNAL zcalloc (voidpf opaque, unsigned items, unsigned size)
 void ZLIB_INTERNAL zcfree (voidpf opaque, voidpf ptr)
 {
     int n;
+
+    (void)opaque;
+
     if (*(ush*)&ptr != 0) { /* object < 64K */
         farfree(ptr);
         return;
@@ -259,7 +261,6 @@ void ZLIB_INTERNAL zcfree (voidpf opaque, voidpf ptr)
         next_ptr--;
         return;
     }
-    ptr = opaque; /* just to make some compilers happy */
     Assert(0, "zcfree: ptr not found");
 }
 
@@ -278,13 +279,13 @@ void ZLIB_INTERNAL zcfree (voidpf opaque, voidpf ptr)
 
 voidpf ZLIB_INTERNAL zcalloc (voidpf opaque, uInt items, uInt size)
 {
-    if (opaque) opaque = 0; /* to make compiler happy */
+    (void)opaque;
     return _halloc((long)items, size);
 }
 
 void ZLIB_INTERNAL zcfree (voidpf opaque, voidpf ptr)
 {
-    if (opaque) opaque = 0; /* to make compiler happy */
+    (void)opaque;
     _hfree(ptr);
 }
 
@@ -306,7 +307,7 @@ voidpf ZLIB_INTERNAL zcalloc (opaque, items, size)
     unsigned items;
     unsigned size;
 {
-    if (opaque) items += size - size; /* make compiler happy */
+    (void)opaque;
     return sizeof(uInt) > 2 ? (voidpf)malloc(items * size) :
                               (voidpf)calloc(items, size);
 }
@@ -315,8 +316,8 @@ void ZLIB_INTERNAL zcfree (opaque, ptr)
     voidpf opaque;
     voidpf ptr;
 {
+    (void)opaque;
     free(ptr);
-    if (opaque) return; /* make compiler happy */
 }
 
 #endif /* MY_ZCALLOC */
diff --git a/modules/zlib/src/zutil.h b/modules/zlib/src/zutil.h
index 18fbef2aa..4425bcf75 100644
--- a/modules/zlib/src/zutil.h
+++ b/modules/zlib/src/zutil.h
@@ -1,5 +1,5 @@
 /* zutil.h -- internal interface and configuration of the compression library
- * Copyright (C) 1995-2013 Jean-loup Gailly.
+ * Copyright (C) 1995-2016 Jean-loup Gailly, Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -28,6 +28,21 @@
 #  include <string.h>
 #  include <stdlib.h>
 #endif
+#ifdef NO_ERRNO_H
+#   ifdef _WIN32_WCE
+      /* The Microsoft C Run-Time Library for Windows CE doesn't have
+       * errno.  We define it as a global variable to simplify porting.
+       * Its value is always 0 and should not be used.  We rename it to
+       * avoid conflict with other libraries that use the same workaround.
+       */
+#     define errno z_errno
+#   endif
+    extern int errno;
+#else
+#  ifndef _WIN32_WCE
+#    include <errno.h>
+#  endif
+#endif
 
 #ifdef Z_SOLO
    typedef long ptrdiff_t;  /* guess -- will be caught if guess is wrong */
@@ -36,7 +51,9 @@
 #ifndef local
 #  define local static
 #endif
-/* compile with -Dlocal if your debugger can't find static symbols */
+/* since "static" is used to mean two completely different things in C, we
+   define "local" for the non-static meaning of "static", for readability
+   (compile with -Dlocal if your debugger can't find static symbols) */
 
 typedef unsigned char  uch;
 typedef uch FAR uchf;
@@ -98,28 +115,38 @@ extern z_const char * const z_errmsg[10]; /* indexed by 2-zlib_error */
 #endif
 
 #ifdef AMIGA
-#  define OS_CODE  0x01
+#  define OS_CODE  1
 #endif
 
 #if defined(VAXC) || defined(VMS)
-#  define OS_CODE  0x02
+#  define OS_CODE  2
 #  define F_OPEN(name, mode) \
      fopen((name), (mode), "mbc=60", "ctx=stm", "rfm=fix", "mrs=512")
 #endif
 
+#ifdef __370__
+#  if __TARGET_LIB__ < 0x20000000
+#    define OS_CODE 4
+#  elif __TARGET_LIB__ < 0x40000000
+#    define OS_CODE 11
+#  else
+#    define OS_CODE 8
+#  endif
+#endif
+
 #if defined(ATARI) || defined(atarist)
-#  define OS_CODE  0x05
+#  define OS_CODE  5
 #endif
 
 #ifdef OS2
-#  define OS_CODE  0x06
+#  define OS_CODE  6
 #  if defined(M_I86) && !defined(Z_SOLO)
 #    include <malloc.h>
 #  endif
 #endif
 
 #if defined(MACOS) || defined(TARGET_OS_MAC)
-#  define OS_CODE  0x07
+#  define OS_CODE  7
 #  ifndef Z_SOLO
 #    if defined(__MWERKS__) && __dest_os != __be_os && __dest_os != __win32_os
 #      include <unix.h> /* for fdopen */
@@ -131,18 +158,24 @@ extern z_const char * const z_errmsg[10]; /* indexed by 2-zlib_error */
 #  endif
 #endif
 
-#ifdef TOPS20
-#  define OS_CODE  0x0a
+#ifdef __acorn
+#  define OS_CODE 13
 #endif
 
-#ifdef WIN32
-#  ifndef __CYGWIN__  /* Cygwin is Unix, not Win32 */
-#    define OS_CODE  0x0b
-#  endif
+#if defined(WIN32) && !defined(__CYGWIN__)
+#  define OS_CODE  10
 #endif
 
-#ifdef __50SERIES /* Prime/PRIMOS */
-#  define OS_CODE  0x0f
+#ifdef _BEOS_
+#  define OS_CODE  16
+#endif
+
+#ifdef __TOS_OS400__
+#  define OS_CODE 18
+#endif
+
+#ifdef __APPLE__
+#  define OS_CODE 19
 #endif
 
 #if defined(_BEOS_) || defined(RISCOS)
@@ -177,7 +210,7 @@ extern z_const char * const z_errmsg[10]; /* indexed by 2-zlib_error */
         /* common defaults */
 
 #ifndef OS_CODE
-#  define OS_CODE  0x03  /* assume Unix */
+#  define OS_CODE  3     /* assume Unix */
 #endif
 
 #ifndef F_OPEN
@@ -215,13 +248,8 @@ extern z_const char * const z_errmsg[10]; /* indexed by 2-zlib_error */
    void ZLIB_INTERNAL zmemzero OF((Bytef* dest, uInt len));
 #endif
 
-/* Ignore the Mozilla build env's DEBUG unless ZLIB_DEBUG is also set. */
-#ifndef ZLIB_DEBUG
-#undef DEBUG
-#endif
-
 /* Diagnostic functions */
-#ifdef DEBUG
+#ifdef ZLIB_DEBUG
 #  include <stdio.h>
    extern int ZLIB_INTERNAL z_verbose;
    extern void ZLIB_INTERNAL z_error OF((char *m));
@@ -255,4 +283,10 @@ extern z_const char * const z_errmsg[10]; /* indexed by 2-zlib_error */
 #define ZSWAP32(q) ((((q) >> 24) & 0xff) + (((q) >> 8) & 0xff00) + \
                     (((q) & 0xff00) << 8) + (((q) & 0xff) << 24))
 
+#ifdef _MSC_VER
+#define zalign(x) __declspec(align(x))
+#else
+#define zalign(x) __attribute__((aligned((x))))
+#endif
+
 #endif /* ZUTIL_H */
